TrendU*GB/US/30 Screw-on style Guide Bush, 30mm

This does work great with the dominofix jig. Problem at least on the bosch router is with the festool 20mm bit, this bushing limits the depth of the plunge ie the collet will bump into this, due to the short shank of the router bit you can only have about 1/4 inch of the festool bit in the router. It worked perfect (be sure to use a centering cone for the entire setup) but not ideal for sure. Not the bushings fault it worked great, just putting it here as an FYI.Followup on the dominofix jig, i would not recommend using this bushing. Not knocking the jig it's very well made however these type jigs can suffer from compounding errors. Bosch router + bushing + short shanking the bit is a lot of additional things (even when centering the bit) to introduce a slight error which can compound. Lots less compounded error chance if you used a festool router. I was a bit off over 4 or 5 feet however it wasn't an ideal setup due to using all of the adaptors (who knows could have also been my surface i was routing had some flex too). It will work fine just a pain in the rear compared to using the festool router.

Works perfect. Using with craftsman router and Domino FX jig