Ansell HyFlex 11-618 Nylon Light Duty Multi-Purpose Glove with Knitwrist, Abrasion/Cut Resistant, Size 6, Blue (Pack of 12 Pair)

These are exactly what they’re suppose to be.For any Amazon reviewers complaining about these breaking down too quick, they clearly don’t know this model is basically, extreme dexterity for light duty work; think electronics assembly, Amazon warehouse style of work, Plumbers and electricians, people who work with their hands; if they’re doing light duty work. Unlike hyflex’s medium and heavier duty gloves; these breath great, feel amazing, taking them on and offside a breeze even if their wet.I’m an electrician doing big condo developments. Trench work, underground, drilling all day with holehawgs. These last about 5 days before I replace them. Catch the back of your hand wrong and the fabric will rip; like others have mentioned. You could get a couple weeks out of them, maybe a month if you’re using them in their appropriate setting. Or use in a heavy setting but replacing them more often. They’re dexterity and “breathability” are really unmatched.

These are great gloves. I use these for almost all garage and shop activities to avoid tearing up my hands. The mesh on the back is very breathable and I find my hands sweat less than wearing Mechanix gloves. I’m a “ruster”; everything ferrous I touch rusts almost instantly and these help a lot with that.One must be aware that wearing any kind of gloves around spinning machinery is VERY dangerous. These have plenty of “tack” to them on the gripping surfaces, and are therefore extra dangerous in this regard. I have to remember to take them off prior to using milling machines, drill presses, etc. I’ve caught fingers up using a cordless drill a couple of times and they grab FAST! The back material is weak enough to tear away, which is a good thing. Having said all that, I will still wear these around the garage and shop; you just have to establish good work habits.These wear out faster than Mechanix, but they are so light and breathable that I think they are worth it. I can usually wear the same pair for at least a couple of weeks of shop work before I have to replace them. I’ve tried other Ansell work gloves as well and while there are some that are tougher and more cut resistant, these are still by far my favorites.Edit:I just wore these kayaking in really hot weather - they were awesome! I’ve used them for handling fish as well. They are going to be a permanent part of my outdoor and backpacking kit from now on.

Great lightweight work gloves. Great for hammering, and working on cars without the bulk of mechanics gloves.

Prosgreat fitI use to deliver parcels and they lasted 2 weeks no problemconsslightly expensive

Wife uses them for work,much better than the ones supplied by her work place. She really likes them. She has a pair of these everywhere in the house ,garage, shed and both vehicles.Very smart buy and great value. Last a long time and fantastic for all kinds o jobs and chores.

I use these for work & then do very well I just wish that they had a little more stuff on the bottom of the glove not to much just a little more thanks

Just as expected except for the size. I ordered the same size as the light blue ones we used and they are not the same. Size 6 was perfect for female hands.

I am required to wear anti-slip gloves at work. I hate wearing gloves! Company provides them free of charge and has had several different brands. This is the most comfortable I've tried so far. They don't last as long as the others and the company no longer provides this brand, therefore I buy my own. I wear them 8-9 hours a day with lots of lifting. I go through a pair a week.

I am a surgeon that have been using gloves all my life for 50 years. This Ansell HyFlex 11-618 Work Gloves marked size 8 is the worst gloves I have ever tried for sizing. I use 7.5 Ansell surgical comfortably for hours. Size 7 Ansell surgical is a bit tight for me but I can manage to wear it for 30 mins without much difficulty. I normally use size 8 DIY gloves of all types including riggers, garden, rubber and similar. Never had a problem with size 8 ever before until I believed that Ansell HyFlex 11-618 Work Gloves size 8 has the correct size... I was completely wrong... These gloves marked size 8 are actually size 5.5 or probably 6 if I can be generous... Very short fingers and too tight... Wrong sizing.... Waste of money and time.... Very disappointed

Ok so I’ve been using these gloves for heavy work day in day out for almost 6 months.I’m a domestic appliance repair man, so I fix washing machines, tumble dryers etc all day. So that means lots of tools, screws, fiddly jobs and sharp edges and heavy objects in my daily work, also very dirty at times!So with 6 months of HARD wear 5 days a week I have nothing but praise for these gloves, I have a pair in my pocket, a pair in my work bag and a pair on the work bench which I cycle through as the pairs get dirty once they’ve all been used a good few times they go in the Wash and tumble with no problems!So the pair in the picture have been used the most with probably 100s of hours of use and 4/5 washes and they are still in great condition!!They’ve certainly saved my hands from cuts, scrapes and those dirty jobs that can’t be mentioned.Before these I tired countless gloves but they were either too flimsy and broke within a use or two or to thick and we’re impossible for use with small screws and delicate jobs… well I certainly don’t get that trouble anymore!I run a XL normally in gloves however I wanted a nice fit for the best results, so bought a large set (size 9) and they are perfect, little tight to start with but they soon ‘fit like a glove’!The price might seem a little high for these however like I said I have nothing but praise… these gloves have been the best investment going! Probably saved me £30 in plasters and antiseptic with all the cuts I gain with my daily work haha!5 stars, and I WILL be buying more… whenever these start to give up the ghost, however i have a feelin they will see me out for the next year if not longer, such good comfort and quality. Can not fault one bit! 100% recommend!!

These are great for delicate lathe work. Thick enough to offer some protection and thin enough for sensitivity. I used to use normal nitrile gloves but my hands would sweat horribly. These are really breathable and comfortable. You get 20 in a pack but they seem to last ages. Professional looking and functional. These are an every day essential for me now.

Good gloves which are very thin allowing tactile working. Cuffs could be thicker, to help keep them up on your wrist, but other than that they wear well, so each pair lasts a good while.

The usual plastic gloves are difficult to remove, these are comfortable to remove while shopping? I brought the largest pair available to facilitate ease of removal they were size 11 probably could have used size 10 for the finger length but the body would have been tighter.