A ABIGAIL Power Window Lift Motor Replacement Compatible with Mazda 3 Mazda 5 Mazda 6 Mazda CX-7 Mazda CX-9 Mazda RX-8 | Replace# G22C5858XF, GJ6A5858XC, D01G5858XB, 742-802

It works! I removed the door and old motor, and my husband and I were able to install the new motor and put everything back together. However, whatever you do, do NOT push when you're installing the motor. If it doesn't line up perfectly, turn on the car and run the switch (push the window up/down button) so the orientation changes, but do not apply ANY pressure to the female part. Mazda didn't think of putting anything behind it to keep it in place, so dislodging it will move it into the empty space behind the inner door panel, and you'll have to almost completely remove the inner panel to fix it. If this happens to you, do NOT remove both flange type nuts in the middle. Only remove the top one so you can visualize the problem. If you remove both, the glass will no longer be supported and you will have to lift the window manually and tape it into place so you can line up the bolts on the window with the holes on the inner door panel. Long story short, DON'T push on the part behind the motor when installing it. :)

Installed today October 3rd 2022. It was the right size, hole pattern and had the correct electrical connections. I have been replacing the plastic gear in the motor the past 3 times it had failed, it will start grinding and will have issues being rolled up. I was done with the plastic gear and installed this motor and it fit right up and worked immediately, was able to get the auto function to work on the window as well. Simple job just need a Flat head screwdriver, Phillips head screwdriver and a 10mm socket and it about a 10 minute job. It this motor fails in the same fashion as my last it would lead me to believe the regulator is bad. Great product will buy again if needed.

So far so good, quality seemed to be on par with the original. Only time will tell. Install is a pain in the butt thanks to Mazda engineering. At first I thought what they did was clever having worked on other vehicles before. But this motor attaches to the inner panel instead of the door frame like other vehicle manufacturers. Making installation a little challenging because you have to attach it to both the panel and door frame. The inner panel does have a provision to hold the motor in place while you screw it into the door frame. However it didn't work that well in my case. So you gotta get one hand behind the door frame and line up and install the motor with the other also making sure the window doesn't slide down the regulator ( I had to use tape to hold the window up).

Fits perfectly in 2012 CX-9 Touring. The auto open feature didn't work at first but that was probably due to the recalibration by the vehicle computer. It works fine now. Even if it didn't it wouldnt have been much of an inconvenience. I tried a repair kit for this motor and it stripped out within 6 months and was not an easy task, taking way more time rebuild. Pay the extra bit. It's worth your time and so much easier.

Install was quick and easy. Prob 30 minutes from start to finish. All I used was a 10mm Socket with an extension, Phillips Head Screw Driver, and some Door panel pry tools to remove the panel with no damage. I can't believe the dealership charges almost 450 dollars to replace this same item. Plenty of videos on Youtube showing the procedure to replace the motor. Saved me time and lots of money