Waterproof Replacement 5.8dBi Strengthen Magnet Base Long-Range Cellular 915MHZ LoRa Gateway Antenna with 3M/10FT Cable for Helium Hotspot RAK Nebra Bobcat 300 SenseCAP M1 Hotspot HNT Miner,

I'm very happy with this antenna. It's definitely overbuilt for general usage. Super heavy with a nice, strong magnet base. It uses adequately long coax that feels high quality. I don't doubt it's good enough for the higher frequencies this antenna is tuned for.I tested this antenna in a couple configurations. One thing I noted was the relatively good SWR throughout the 902-930 Mhz band. The highest SWR I measured was 1.8, and the lowest was 1.01 (above 930). I have attached photos to this review so you can see for yourself. But with that said, these readings are very dependent on a good ground plane. The antenna is not a dipole, it requires a ground plane to get even remotely decent SWR. The antenna element itself seems to be a solid piece of copper or similar alloy. This is what gives the antenna much of it's substantial weight. The SMA connectors are of good quality and are crimped to the coax with strain relief. Overall, I highly suggest this antenna. It works well!

I ordered 3 of those antennas for a project and when I tested them, I found that the SWR was very low at 915 MHz! (1.02) so that’s a perfect antenna that is perfectly tuned on the 915 MHz frequency.This antenna have good performance and I recommend it!

No se por que no esta logrando actualizarse, somo si la antena no funcionara... ojala pudiera contactar al vendedor

Works better than expected . Comparable to my McGill 6dBI antenna in delivery of helium mining performance at same location. Have purchased another one for a new miner installation.

The copper base magnetic is all this is get the attena 5.8 dbi Lora and the connector piece they are both under bought with section.Worth the money as of today the attena is 60% off buy it now