Arrow Sheds Floor Frame Kit for Arrow Classic and Select Storage Sheds, Extra Large Sheds

Did an extensive search before purchasing to find the hight of the bars to no avail. Purchased figuring it was designed for the Arrow shed.... They are 1" tall. The base of the shed is 1". So, installing these, then putting a plywood/OSB floor (I was using 1/2") doesn't work. The side braces of the shed protrude over the base area, so either the floor has to be cut smaller, leaving gaps, or individually cut around each side brace. Further, it means you have an additional lip at the door from the wood floor.Instead, just buy or cut some 1/2" strips of wood (if using 1/2" floor) and mount under floor board first. Don't waste your money on these.

I will update this when we get to actual installation (weather has me delayed until the snow is gone). I rated a 4 not because of any installation problem but because unless you know in advance, you won't know to get 2x4's and plywood to match the kit. You will need 8 2x4's and 2 sheets of standard 8'x4' 3/4 or more thick plywood. It may be possible to piece a single sheet for a 6'x5' shed. Cut the bottom of the plywood so you have a 6'x4' section then cut the leftover piece to a 1' length and add that along the side then a square 1'x1'. There are standard flat metallic strips with screw holes you can use to affix the pieces for stability if done that way.Added note now that we have built the shed. We had a handyman assist in building the flooring and shed. He had not done this manufacturer before but working at a steady pace (with us handing him tools or holding parts for him as asked periodically) it took him 5 hours. I raised the review to a 5 because for it's class we are quite happy with the unit. Recommend you have several tubes of silicon sealant as there will be edges and screw holes you will want to seal (to be expected with any metal shed if you did not know that). Recommend having a battery operated drill that can also do screws or it may take longer than expected as there are quite a few if doing that by hand.

Not what the pictures make you think it is. But if you just need a basic metal frame for a square floor it works.Doesn't come with any instructions or screws or bolts. Doesn't even have predrilled holes. It comes with the middle rib pieces only that are about 3 ft long and 3 sided. They have tabs on each end to screw together.I put bricks under the meeting joints and covered it with 1/2 " plywood and makes a pretty stable floor. I think it is a descent price for the pieces of metal you get. I won't put any weight on this until you have a floor down to spread the pressure. The metal is only 3 sided so walking on it would bend it.

I ordered this separately from an Arrow 4 X 10 shed I ordered not realizing that the shed included this same floor kit. That said, I appreciate the great customer service from Amazon that let me return this even though I was 2 days over the return date.I guess having this kit is better than having nothing to set the plywood floor on but only barely. This entire "kit" consists of a few flimsy steel C channels that just sit on the side bottom rails with a little tab you bend over. I would have been upset paying this much for a few pounds of thin steel. If you screw the plywood down to the rails you get a little more sturdy floor.

This is literally just the frame!!! And you have to purchase plywood, the thicker kind to put on top of this steel frame. That's the floor. It would have been nice if it was clear that you also need to purchase the actual floor (aka plywood) with dimensions so if you are meeting a deadline, you're not running around at the last minute to Home Depot. Had to read and reread the instructions on the Plywood Requirements to make sure I purchased the right sizes... the instructions could have been written better.It is a sturdy floor metal frame... thus the 4 stars. The Plywood I had to purchase was for 6'x5' shed. Here are the instructions for the sizes to save you time:6'x5' SHED-Purchase 2 Sheets of Plywood - make sure it's 5/8" minimum thickness and is Exterior Grade (Home Depot will know)-Sheet# 1 - have it cut to 36" x 71 1/8"-Sheet#2 - have it cut to 16" x 71 1/8"The reason why you need 2 sheets of plywood is because there is no plywood that's 52" x 71 1/8" (as per Home Depot)... and besides, I don't know if one full sheet will fit through the door. It's easier to lay down 2 smaller sheets of plywood than 1 whole sheet (if such a size exists).5'x4' SHED-Purchase 1 Sheet of Plywood - make sure it's 5/8" minimum thickness and is Exterior Grade (Home Depot will know)-Sheet# 1 - have it cut to 40 7/8" x 54 1/8"Based on these instructions, perhaps this size will fit through the door of the 5'x4' shed

Was expecting for a heavy gauge of sheet metal. The same thickness as the regular metal sheds. If wife didn't throw the box, I'd return it with no doubt. Paid about 100 bucks with tax. Not a good investment. Didn't mind taking photos since I don't want to see it anymore! Waste of money ;(

We have carpenter ants so metal floor frame will last a lot longer than wood placed close to the ground. Im thinking of tar papering the underside of the plywood floor as a moisture/bug barrier, paint floor top. Weatherize with caulk. We have black widows to. Why house more critters than you have to. Luckily all the rattlers have enough wilderness to stay away. Everyone has at least two dogs and cats run wild. I live is rural area.

The shed took about 6 hours to construct. Instructions were fairly clear and were confusing in only one our two areas. I found it easier to manually insert screws rather than using a power driver. Advise people to purchase the anchor kit and floor kit along with the shed. Then once the shed is finished, it can be anchored and the floor installed. Read the anchor kit and floor kit instructions before you start building the shed. The shed parts fit together nicely and the shed has a high quality appearance. I recommend this shed for anyone looking for a small storage building to put in their yard.

Don’t waste your money. Just use a few 2x4s instead.

You do not get what is shown in the picture. Save your money. This product is not worth it.