DEWALT Diamond Blade for Masonry, Dry Cutting, Continuous Rim, 7/8-Inch Arbor, 4-1/2-Inch (DW4725)

As a DIY enthusiast, I often tackle various masonry projects, and the DEWALT Diamond Blade has become my go-to tool for these tasks. It delivers precise, clean cuts every time, making my work much easier and more efficient. What I particularly like about this blade is its durability and performance. It cuts through masonry like a hot knife through butter, whether I'm working with bricks, tiles, or concrete. The continuous rim design helps in achieving smooth edges without chipping, which is crucial for a professional finish. The blade's compatibility with my angle grinder is seamless, and it remains stable during operation, reducing vibrations significantly. This stability not only enhances control but also reduces fatigue during extended use. It's also great for dry cutting, which means I don't have to deal with the mess of water-cooled systems. However, it's important to note that the blade can generate a fair amount of dust. I always make sure to use it in a well-ventilated area or with proper dust collection measures. Additionally, wearing safety gear, especially goggles and a mask, is a must to protect from the fine particles. In essence, the DEWALT Diamond Blade for Masonry is a reliable and efficient tool that has greatly improved my masonry projects. Its durability and precision make it a worthwhile investment for any DIYer or professional looking for clean and effortless cuts.

I needed a masonry cutting blade for my grinder tool. I've never cut brick before and this blade installed quickly and cut easily into a flat brick stepping stone. Easy as a wood blade through a two by four. Solid material, heavy metal, works well.

This DEWALT diamond blade worked perfectly for my masonry project—smooth, clean cuts with no chipping, and it handled brick and pavers with no problem at all. It fit my grinder easily, stayed steady, and is holding up really well after multiple uses. Excellent quality for the price!

I primarily use this 4.5in diamond blade on a battery powered angle grinder. The blade itself is well made and the diamond cutting end, slightly wider than the blade itself. I have only used this to make cuts on ceramic tile and seems to do a decent job. It is quite the challenge to cut a piece of tile without any chipping with this blade which is why I removed a star. The flutes on this blade tend to fill with dust quite easily, but I am not sure if this affects the performance of the blade or not. So far after 100+ cuts, it is still able to make cuts just fine. Pros: - Long lasting - Fluted design that helps if you need to do some small grinding on the edges - Works fine on angle grinder - Good price Cons: - Seems to chip ceramic tiles quite easily - Flutes clog with dust easily

I was very impressed with the performance of this blade, since it effortlessly cut through the concrete bricks I bought it to tackle. I can't speak to its durability because I only had to make a few cuts, but it seems like the blade would hold up well for many cuts, assuming the diamond compound remains in place-- and I saw no visible loss from the cuts I made.

I wanted this to cut out some damaged asphalt and it worked great! I had some unknown fungus growing under my driveway and it was causing a volcano effect and the asphalt was starting to crumble. Sliced through the asphalt easily without any problems. I highly recommend.

Cut right thru the tile and grout. Worked good for not much $

Top notch blade that cuts as designed. Appears to be extremely durable. It cut through cement like a hot knife through butter.

I was able to cut 2" thick pavers (cut both sides and snap off) in both straight lines and curves (around a fish pond). The blade worked very well and is still usable. The entire area was about 14 x 14 with a 6x14 walk way. Cuts were needed on some of the edge pieces and on some of the walkway pieces. A full sized concrete saw would not have worked on the curves.

buen material, para corte en muros .. de buena calidad, recomendado !

Easy to install and works good

Solo que es más pequeña de la apariencia en la imágen de venta.

Wow!, The best concrete cutting blade I ever used. Cut through hardened lawn edge concrete forms like a sharp saw through softwood lumber. Previously I had only used the standard masonry cutting blades that wear out after cutting one brick, and takes 10 minutes to do that little job. Thought I would try this 4 1/2" DeWalt diamond blade and I'm not sorry I did. I didn't even notice the slightest wear on the blade after completely cutting 2 sections of hardened concrete formed blocks. Cuts at least 15 X faster than the cheap discs with what seems like no wear at all. A really good purchase at a very decent price. Arrived very quickly in the mail.