GPU VGA PCIe 8 Pin U Turn 180 Degree Angle Connector Power Adapter Board for Desktop Graphics Card-Reverse Type 3-Pack

Don't let some other reviews fool you about these being unsafe. It seems that there are some people reviewing these that understand how to use a multi-meter, but don't really understand how GPU's are powered. Yes, all of the ground pins are common as are the three 12v pins. This is NOT dangerous, and it is NOT a short as these people are implying. It seems they decided to use a single ground plane and a single 12v plane on the circuit board. The GPU only uses 12v and ground. As long as you're getting the proper signal on the proper pins, which all five that I've bought do, you're perfectly fine. If you were finding the ground and 12v bridged... that would be a short, and would be absolutely dangerous. Not a single one of these that I've bought have had a short. You can ignore the reviews saying these are unsafe because the grounds are all common as well as the 12v, and that's perfectly safe for this applications. These people simply do not understand what they're talking about. As to the rest of the product. They do what they do well, they're constructed about as well as you can expect them to be and they look quite good... much better than the majority that just put some foam on the back to protect the exposed circuit board. Above all else, they're safe to use. My one complaint is that there is no latch, which makes sense if the latch is on the inside of the connector as it would be very hard to reach. However, once connected, the connection is pretty snug and they don't back out easily. I'm using a different set on a 3070 Ti and they've been working great. I was using this set on a 3080 Ti, but opted to go with the Thermal Grizzly WireView. Not for any shortcomings of this product, but the way I have the GPU setup and my custom cables, it was pulling on these in a way I didn't like and the WireView is a single block making it more ridged for this application. It's also nice that it can display how much wattage and current the GPU is currently consuming in real time. However, it is quite a bit more expensive. If you need a 180° adapter and you don't want to spend a lot, but you want it to look nice, these are a must. Just be sure that the orientation is correct for your GPU. A lot of people are giving these bad reviews because they didn't read and bought the wrong kit. If you're willing to spend more and you'd like to be able to see the current power consumption, I highly recommend the Thermal Grizzly WireView.

I give this product 5 stars without hesitation. The build quality is excellent, very sturdy and fits perfectly on my GPU setup. It makes cable management so much cleaner and prevents bending stress on the cables. For the price, it’s honestly one of the best accessories you can get. Simple, effective, and works exactly as described. Highly recommended!

I didn't need this to solve Nvidia connector problems, but thought I'd try the different look of the adapter. They plugged into cable and gpu clean and easy, and the manufacturing quality looks great. It's been 4 months with no issues and I now love the look with no bending cables. The 8pin cables now lay flat against the gpu backplate

Did a minor upgrade to my computer to get ready for Windows 11; Intel i7-6700 to AMD 3700X. The new motherboard, installed in a horizontal case, had the PCI-e x16 right under the 200mm case fan. So, after installing 6750X GPU and plugging in the 2 x 8pin (split), the cable loop was hitting the fan, preventing fan to spin. The 180 Degree Angle Connector is low profile and moves the cable downwards towards the motherboard. The fan now spins freely. The secondary effect of the connector is that it makes the GPU more aesthetically appealing. As if there are no cables connected to the GPU when looking down.

Looks great and ran well for a while, but eventually just wouldn't stay seated or deliver appropriate power leading to crashes. Luckily mine didn't melt or do any damage, but I can imagine why some of these arc and burn up.

Just got these because my CPU cooler (Noctua D15...BIG BOY) is a little too big and causes issues with the power cables for my vertically mounted GPU. These work fantastic so far. They are a great fit to my Saffire Pulse 7900XTX. My only issue with them is that the build quality is a little meh. If these were to be frequently reinstalled I feel like they might eventually fall apart but its really just the outer plastic housing. Since its for GPU, that shouldn't be a thing though because you should only ever really have to remove these if taking your GPU apart to re-paste the chip. I don't see me needing to remove these anytime soon. Will be buying some more for my wife's GPU next. Great pricing too!!!

These are handy little adapters. They connect easily, are of high quality and they are very durable.

I am using these on a Zotac Twin 2080Ti that I've installed a Kraken G12 on, so no backplate when I originally installed these, but wanted to write this review to warn to double check if you decide to purchase a third party backplate from somewhere like V1 Tech. The plate itself is made of acrylic and is fairly thick, so it lifts the other end of the backplate when these are installed with it. For me, I was able to finagle the plate juuuust enough that I don't feel the need to mess with it further, and I really really like what these do for the overall aesthetic of my build. If you're not in this very niche subset of users who will both use these and a V1tech backplate, they work well, and help clean up your cabling if your cables are not the stiffest. I found that the aesthetic was improved mainly because I like the look of straight cables versus curved, and with these you are able to achieve a straighter cable to the GPU. Also of note, these pair well with the Antec All-white cable extensions, which at $35 a piece at time of review, may be a bit steep, but were absolutely worth it in my use case because the actual connectors are white as well versus most other brands that use white cables with black connectors.

worked fantastic, worked on my rtx 3080 for about 2 years now working on my rx9070xt, don't get hot, good quality, look good for my case to make it better on the angles, very good value, and brilliant durability

best way to keep. ablest straight and remove the unnecessary bends in the gpu cables high can cause harm later down the line hides. ablest better looks great and colour matching white or black

Exactly as described

Funciona bem com uma 7900xtx

La svolta per cablaggi puliti in build compatte! -Risolve l'ingombro dei cavi GPU -Design a U invertita perfetto per case piccoli -3 adattatori inclusi (ottimo rapporto qualità-prezzo) -Potenziale aumento della temperatura nei loop d'aria molto stretti Must-have per PC builder esigenti che vogliono un cablaggio perfetto senza compromessi!