Chemical GuysACCS37 Easy Reach Wheel and Rim Detailing Brush

-- Update --Like others, the tip of my brush fell off during first use. I had suggested using a plastic twist-type wire connector to cover the ends of the twisted wires and to protect my wheels in my original review. I've used the brush with this modification a number of times and the connector has remained solidly on. I've attached some pictures. It's an inexpensive and easy solution -- one I'm sure the Checmical Guys could easily adapt for going forward. I hope this suggestion is useful for others who have had the end of their brish come off.---The bristles are very soft and flexible so if you have a lot of brake dust or grime to remove, this may not be the right brush for you. If you clean your wheels regularly, these may be fine for keeping the inside of your wheels clean. Otherwise, get a stiffer brush.The reach of the brush is good and the protector at the end of the handle does a good job of protecting your knuckles.I was really disappointed in one area... the core of the brush is twisted steel wire. At the tip, a small plastic cap has been put over the sharp ends to keep from scratching or gouging your wheels. It's just placed over the top and held by friction. Sometime during my first use of the brush this little plastic cap came off. I couldn't find it.Here's a suggestion for the Chemical Guys to improve the design and make that plastic tip stay on -- why not replace the little plastic cap with something like a twist electrical wire connector? At minimum, why not use superglue (or similar) to help keep the plastic tip on?

Ok do you have nice wheels ? Do you wanna keep them clean and scratch free ? If you answered yes to those questions trust me don’t buy these…. I scratches my wheels on my truck cause the tip fell off and after doin so I sent this back.. I was big on chemical guys items til this happened. But one bad product can ruin a brand and this is embarrassing that chemical guys even has there name on this trash item.. avoid this if you care about your car spend the money on wheel Woolies or adams wheel brushes instead.. I’m done with chemical guys products anymore

I don't understand why there are so many four and five star reviews. This this is long - which means when you insert it in-between spokes, only a couple inches make it through before it hits the disc brakes. It is also flimsy, which means if you have anything than a light dirt, such as brake dust, some pressure needs to be applied in order to scrub it off. The middle of the brush is a simple wire, so it will bend when anything more than gentle pressure is applied.

I have always used micro fiber fluffy sponges to get in between the spokes and windows of my wheels. As I am getting older and don't want to be a slave to my car, I was looking for a short cut. The images and videos make this look like a perfect solution, but as many others have pointed out, it is flimsy and requires some pressure to get anything done, to make matters worse the bristles are very coarse. I now have scratches that are very visible. Can't polish them out either. I love every other Chemical Guys product I have, but can't recommend this.

Not impressed, and would NOT suggest. There are very few bristles on the brush. It looks full and thick when its dry, but as soon as it gets wet it becomes very thin and covers very little surface area. The bristles are only attached to a flimsy wire, which prevents you from putting any kind of pressure on it because it bends so easily and the bristles themselves are very coarse. Whats worse is the plastic tip on the end of the bristles fell off almost immediately which exposed a very sharp wire that could have easily scratched up my rims, luckily I noticed it.

Easy to use, cleans rims with no scratching due to soft bristles. Great reach. Just be careful during use so that the rubber tip does not come off. It will expose the sharp end of twisted wires which could easily damage rims and could potentially cause injury. It happened to me and is the cause for the 4 of 5 star review. In future this brush and brushes like it should be designed so there’s no way for anything sharp to be exposed. I was frankly surprised how easy it caught an edge and pulled off. Then it took a while to find the missing tip which fell into the suds. Otherwise a great brush and works as advertised in my opinion. Holds soap well and knocks off grime! Please know however I’ve only used this brush twice. One on a 2018 Toyota Highlander and on a 2019 Ford Ranger With glossed rims 😬 which definitely need a soft touch. Worked great on both except for the tip incident which happened upon second use. Mind that and it’s a good buy. Better when on sale!

I use this brush to clean inside the wheels/rims on my car. Very effective when combined with wheel cleaner. Some reviewers took issue with the fact that the brush is bendable; IT IS DESIGNED THAT WAY (check the Chemical Guys website if you want). In fact, I keep mine slightly bent all of the time so that it fits in my bucket for storage. I used this brush all summer with great results. It is holding up well and should stay in service for many years to come.

AWESOME!!! Where has this brush been all my life? First 2 pics are before and 2nd two pics are after... Just spray on a little aluminum wheel cleaner, wait 3 minutes, and brush like your brushing your teeth. I mean, it got ALL the way to the inner rim! Highly recommend

If you love your wheels drums clean this is a great item to have! gets in tight area that other wheel cleaning tools cant, don't have to worry about anything else, obviously not great for clean spokes but that's why you have about 3 different tools for your wheel cleaning bucket. my only complaint is the rubber tip at the end comes off easy. Suggest super glue it to the top so it doesn't come off while cleaning.

I bought this specifically for the plastic handle as many Ive had have rotted and broke down when getting wet due to the handle being made of wood. Surprise surprise this handle is not plastic... it’s WOOD. Buyer beware!

Good tool for cleaning wheels

the quality of wheel and rim brush is too big, I used it not much.

I won't recommend it