PiBOX India Raspberry Pi 4 Case with Fan Dual Speed 2GB, 4GB, 8GB Black, with air Vents, with High and Low Speed Option Fan Modular Design, Pi 4B, Pi 4,Camera and Ports ABS (Black)

Absolutely brilliant cover. 3 layer, black, smart looking cover, with great cutouts, must buy for the Pi.Although a little thick, it works perfectly when attaching gpio pins, including the fan which came with the case.Fan is amazing! Almost noiseless, tried 3.3v pin on the pi at 6000rpm, it didn't seem like it displaced much air, but I did some testingIdle temperature - 40°Cpu stress test 100% load - 66°That's really brilliant considering without the case my idle temp was 55°I tried with the 5v, and it's working extremely well, but with some negligible noise.Idle temps - 34°Cpu stress test- not carried outTemperatures of the board were near to 60 degrees before the case and fan.After installation it has dropped to 35 degrees at full fan load. Extremely happy with the product, and the cooling.

Great product, fan speed and case quality is also good, and value for money, noise level is fine(bearable (using with 5V)), but a inconvenience while installation of fan, it would be great if it was fitted by default.

This is a good case for Pi 4 but has a single design flaw. There is a 2mm gap around the top side cover. This is for air intake to improve cooling but actually does the opposite. The air drawn inside gets removed by fan before it can reach the inside of case.I sealed the gap around top cover with cello tape (pic attached). This improved cooling by 10 degrees and also reduced the noise level.Temperature Benchmarks:Case+Heatsinks+Fan (No overclock): 67 degrees maxCase+Heatsinks+Fan (2 GHz overclock): 80 degrees max (throttled)Case+Heatsinks+Fan (2 GHz overclock) (After taping the side): 70 degrees maxThe included fan is a low profile fan (3007) with 7mm thickness. This means there is enough space to attach heatsinks to cpu. Received 2 aluminium heatsinks for CPU and USB controller. You can attach one more heatsink on RAM chip if you have one.

The case is really good, just the fan its too loud. Let me give you an example. I have my pi running as a server in a cabinet made of plywood and i can hear the fan. It would be better to have a pwm fan for the pi then this fan. But no offence to the case, its really sturdy and solid build quality.

The fan initially worked well, but after just 15 days of use, it has started making a noticeable noise. When I shut down my Raspberry Pi before, the fan used to stop smoothly, but after 15 days it started halting abruptly with noise, indicating that the motor brush might be failing.I contacted the seller about the issue on Whatsapp, they suggested me to lubricate the fan. I followed the procedure and it worked fine for 1 day. Then the noise started again. After 3-4 days, it completely stopped working and only getting heated up unnecessarily. I will no longer keep it plugged in my pi as it can damage it.While the fan's cooling performance was satisfactory, the motor quality seems subpar. I am trying to contact the seller to provide me a replacement fan. Will update the review later if all goes fine as my current experience is very bad with PI Box.Edit: The seller responded and fan was replaced with additional 50 Rs delivery charges. It's working fine as of now and there are no noise related issues as well.