POE Combiner Splitter Adapter, Run 2 IP Cameras on 1 Cable

Been using this for a month now powering my Reolink doorbell and IP camera works well so far.

Sometimes I am sceptical of these things - no need with this one - it works - I messed up when I first plugged it in - wires into the wrong places, but then did it correctly and no problem- will probably buy some more.

This works with the POE ports on an Hikvision NVR when others do not.

I hadn't heard of devices like this "IPCamPower POE Splitter Kit" before. I've recently upgraded from an 8 channel NVR (using POE), to a 16 channel NVR with POE. The only down side to that upgrade is running the cabling for the extra cameras. I bought this kit hoping it would work, and the good news is it does perfectly. You plug the splitter/ combiner? (with the switches on it) into the two channels on the NVR you want to use, then run the single cable from it. Then plug the other splitter cable onto the end of that single cable. Then run the two cables to your cameras. I used B mode on the combiner end as suggested in the instructions. After the splitter at the camera end, I've got one camera on a 5m cable and the other on an 8M cable- they work fine, even the POE.

شغال ممتاز

I had a buried line running in conduit to a tree for a camera and realized, I could eliminate 2 others from my house if I had another one in the same tree....IPCamPower to the rescue! Worth the money vs. time/effort to run another line. Initially, only 1 of the ports was active, but flipping the switch for that port fixed it. I'm assuming my cables are not as expected. I was VERY happy when it worked. I highly recommend it. It seems well-built and the instructions are fine...really, plug it in and go. If something is not working, try flipping switches (1 thing at a time, also make sure the cable you're using works, etc..). I had a bit of a tough time cramming all of the cables and the adapter into the junction box. I could have left it all out in the weather using the included caps. I'm very pleased. I see no loss of signal over the 2 cameras now running over the 1 cable. Power is good. I didn't measure anything but the video is perfect from both cameras. I'm running an 8MP and 5MP Foscam camera with no problems.

Potwierdzam, że działa z kamerami i rejestratorami Zintronic / Herospeed. Zwykłe rozdzielacze nie działały.

Purchased for our home security cameras. I had no prior background with installations and found these were easy to set up! We have 4K cameras - the video/image quality appears unchanged when using these. Perfect for what they are for!