AO Smith9722 5.0-Inch Frame Diameter 1/8 HP 1075 RPM 208-230-Volt 0.9-Amp Ball Bearing Multi-HP

So far so good. Installed this fan motor along with a new dual-run capacitor and a new hard start boost kit. A/C runs beautifully. The fan motor was easy to install, the black/white wire connector for switching fan rotational direction was great to have and saved me a great deal of time, after I noticed the fan was sucking air in instead of pulling air out of the condenser unit. It is quite and does it’s job. I would have paid sound $600-700 for hiring a HVAC company to replace all three components. Instead I did it myself with less than $170 in parts.

The seller got this motor to me eleven days earlier than the estimated delivery time. It allows four different bolt circle settings and has all the hardware needed. The rotation can be changed by unplugging a connector and reconnecting after rotating 180 degrees. I cut the connector plug off the old motor and soldered the splices to the wires on the new motor. This was a replacement for a burned out fan motor on my condensing unit. Be sure to replace the capacitor too. It worked perfectly. An air conditioning company wanted 550 dollars to replace this 89 dollar motor and 14 dollar capacitor for less than an hour's work.

Product came within 2-3 days and does exactly what it needs to do. The colors of the wires are different from the OE in my Coleman unit but was pretty simple to figure out which went were. This was a 3 wire unit and my condenser had a 3 wire set up so there was no need for a second cap.

I have a small York exterior AC unit that recently died. It quickly became obvious that the only defective part was the aging motor. I verified the size, HP, and RPM speed before buying it, but several other sites claimed this was the new direct replacement. Installation was easy and performance has been great. The easy fan direction swap plug was a lifesaver when I noticed it wasn't moving air the proper direction when I first installed it.

i saved 500 dollars buying it from you

Good product for the price , fit just right .

I installed this a few months ago and so far it's working great. It rotates faster than my old motor. I am happy with it.

Came with clear instructions, lots of wires but all the necessary info is available for the specific aplication you are using it for. I found too that my capacitor for the motor was also burnt out, i should have checked it first so I could have ordered them together!

got it this morning for my broken condenser fan, which is A.O smith F42D29A50 originally.Perfect replacement without any problem with installation.Run smoothly and quietly.