Kojem3/8" Quick Tach Attachment Mount Plate Skid Steer Adapter Bobcat Thick Steel & Skid Steer Conversion Adapter Bobtach Latch Box Plate Weld On QTK Universal

The Kojem 3/8" Quick Tach Attachment Mount offers a convenient solution for connecting various attachments to equipment with a 3/8" quick tach system. Its simple design allows for quick and easy attachment changes, saving time and effort on the job. The sturdy construction ensures durability and reliability, providing peace of mind during heavy-duty use. However, users should note that compatibility with specific equipment may vary, requiring careful consideration before purchase. Overall, the Kojem 3/8" Quick Tach Attachment Mount serves its purpose effectively for those needing a reliable attachment solution.

In the condition I received the bucket plate you might as well sell this as a diy weld yourself kit. You screwed up the easiest piece of this puzzle in a royal way. I can’t install this and feel confident it won’t break. If you shipped it in this condition then I have zero faith in these Chinese welds. I now need to cut it all apart and weld it properly. Material seems to of quality. This is seller and human error here.

The pin springs are weak, will not hold enough down pressure. The attachment will pop off unless the latch springs are modified.

High quality. No need to modify the lock pins. The handles come set backwards. Make sure you open them up and pull the pins out of the lock hole then adjust the handle and reinstall the pin into the hole. Only issue I found

Its ok but if you get a kit with a bad bolt or nut. You will have fun getting replacement parts. My setup came with one of the handle bolts and nut stripped so had to tack weld the nut on. The bolts used is fine thread and so I had to get a new bolt tap the threads in the plate to get it to all tighten up. My plate that came with this kit. I had to straighten it with winches. The plate was bent probably through shipping which most of the cardboard was missing. Basically came in half a box. Took me time to straighten it so it was weldable. I had to drill holes through plate and bucket to keep it stright and pull the quick attach plate stright enough to weld.