Birllaid Light Dimming Stickers,4Pcs Light Blocking Stickers LED Cover Filters, 8 X 4 Inch Light Dimming Sheets for Electronics,Alarm Clock, Radio, Cable Box, Monitor, LED Number Readable

The LED display on our humidifier is extremely bright. It's very annoying especially at night. These static cling dimmer sheets work beautifully. They stay in place even in a humid area. They're thick enough to reduce the light without completely blocking it out. It matches the black on my humidifier perfectly so you can't even tell there's anything covering the LED panel. The sheets seem very durable and you get 3 sheets so I love the value. They're easy to apply, simply peel the backing off the sheet and it clings to whatever you need with no bubbles. If you do get bubbles just peel back off and reapply. No sticky residue like with stickers. If the sheets are too big for your needs, cut the sheet to your needed size before you peel off the backing. I highly recommend these dimmer cling sheets.

The clock on my new LG microwave was great during the day but at night it would light up my whole kitchen brighter than a night light. Don't know why the manufacturers don't give you options to dim the clock. These dimmer sheets worked great they dimmed the clock down to the perfect level. It was bright enough to see during the day and at night it didn't cast any light in my kitchen at and was still easily readable. Make sure you apply it right the first time. Yes you can peel it off and reapply it if you made a mistake. But the corner that you lift up to peel it off will not lay flat again like it did when you first applied it.

Works great. I love it. Does exactly as it says.

Finally a film that dims and doesn't 100% block out the light. Used it on my controller for my electric blanket. The lights on it were extremely bright. They only give you 3 small pieces but it did the job. It was a little difficult peeling off the part over the sticky film but it worked. Just use 2 pieces if you want it to dim more.

Why does every electronic device need LED light that is bright enough to guide a ship to shore? My router, my TV, my humidifier—my bedroom looked like the Las Vegas strip at night. I couldn't sleep. The Solution: These stickers are genius. They are just little tinted circles. You stick them over the light. Performance: They dim the light by about 80%. You can still see that the device is on, but it doesn't burn a hole in your retina. Adhesion: They stick well but peel off without leaving goo. I went on a spree. I covered every LED in the house. The darkness is beautiful. I slept for 8 hours. 5 Stars.

This dims the glow very well while still allowing the clock light to be read perfectly. However, other reviews about the adhesive are correct. The adhesive does not work. You will need some sort of tape for it.

I bought this to dim my very bright new clock, it worked great to take the edge off. Though it is still fairly bright so at night I turn off the light ring and change the numbers to red which does the trick with the dimmer sheet attached. I think two sheets might work better and plan on trying that out. Size wasn't exactly right for this clock (but I knew that since I measured before buying), but I really like that I could just stick it on and not worry about cutting something to fit. It sticks on really well so make sure you line it up right the first time (I did not, lol). Looks good to me though and would buy again!

depending on your application the sheets can be cut to fit. I used 2 to on an already dimmable alarm clock.

I needed a way to dim the display on my treadmill. It was Way Too Bright and there was no way to dim it. These Birllaid Static Cling Dimmer Sheets worked perfectly for me. They were exactly the right size 6" x 3" inches so I didn't even need to cut them. Installation was a bit tricky due to a lip on my treadmill display and the hard plastic backing sheet on the static cling overlay. These sheets are similar to a screen protector for your cell phone only tinted. After two attempts I was able to get it centered correctly with only a few air bubbles. Even with the air bubbles it looks ok. You get 4 sheets in the pack so when the time comes to install a new one, I'm sure I'll do a better job now that I've got the hang of it. Performance wise these Dimmer Sheets are GREAT! They did exactly what I wanted. They dimmed the display but about 50% which significantly cut down the glare and reduced my eye strain. Without the dimmer sheet the glare from the screen was too bright and I had to cover it with my phone or a book. Now I can leave the display uncovered and view it during my workout. Overall I'm very happy with these dimmer sheets. They are a bit finicky to install and remove but work great. I would highly recommend these dimmer sheets if you want to dim an LED display.

It's exactly what I wanted. Sticks on flat surface perfectly. My humidor has a bright display behind glass. Dimmed it 90% with 2 layers. Cut both off the 1 of 3 sheets. Absolutely what I was looking for. I might make better cuts to make it pretty but. It was stupid bright before.

I bought this to install on my new microwave clock, which was too bright and hard on my eyes. It worked perfectly. Took the sharp light off and left the numbers bright enough to be seen clearly. I am going to use some of the product to cover my alarm clock numbers, they are so bright that they light up my room even in the dark. I am very pleased and will recommend it to my friends.

Bit pricy, but it works great for my baby monitor which is too bright at night even on the lowest setting.

Wow, I'd much rather use this as a screen dimmer at night before bed than those screen dimmer apps. I'm giving this 5 stars because it dims and touch screen works great through it. It does the job well. Removable and restickable. Would recommend it.