UCTRONICS 0.96 Inch OLED Module 12864 128x64 Yellow Blue SSD1306 Driver I2C Serial Self-Luminous Display Board for Arduino Raspberry Pi Pico

This is a great little display for the money! I received it yesterday and was able to get it set up and running on my project in no time. I cannot speak to the refresh rate as I currently send data to it once every second. But the brightness is amazing and the top 16 rows of pixels are yellow which is great if you want to display errors or have a contrasting title line, I had a short in one of my sensors on the same i2c bus in power circuit which caused the display to pixelate badly but as soon as I replaced that sensor, The screen worked normally again. The circuitry at least is very durable. It connected at i2c address 0x3D easily as described.

Works great for my test project. Animations are clear and brightness is great. If you’re on the fence about which affordable OLED to get, this is it. I had previously ordered another brand of the same screen in a 3 pack for about the same money. All of those were DOA

Works great. I used the Adafruit SSD1306 and Adafruit GFX Libraries in Arduino. Claude can plug and chug with this all day long :)

Recently got this little display and once I had the Arducam master file copied to the Arduino libraries folder it worked fine. It took me a long time as a newbie to figure out that you have to copy the entire Arducam 1306 master folder from github into the Arduino libraries folder with all its files, not just the .h library. In my case, they were not zip files so I just copied them straight into the Arduino libraries folder on Windows 10. Sounds straight forward but it's not explained clearly in the display instructions nor on the github site. I lucked out guessing that the SDA wire goes to the A4 pin and the SCL wire goes to A5 pin on the Nano Every board. Did not have to change the address or modify any chevrons. Other than figuring this out it works fine and it greatly simplifies using an LCD display as the i2c uses four wires only. Great improvement from the rat's nest of wire LCD displays without i2c require. Note that it's a tiny screen but the font is sharp and clear. Hope this helps.

I liked this display quite a bit. It is very simple to use and works quite well. It was connected to Arduino Uno Wifi R2 and worked pretty much straightaway. The only issue I had is that the version of Arduino that I use has SPI pins different from the regular Arduino. After I figured that out it was very easy. Display is quite small, but very bright and sharp. It is not color display but has two colors - top is orange and bottom is blue. But you can order single color display as well. Over all I am very pleased and would definitely order it for other projects. One caveat is that you need to have a good eyesight to read it as the writing is very small. Font size can be increased but then not much would fit on the screen. Great for status display that you do not need to read often. Also can do graphics.

I bought this last year just on a whim, messing around, and finally came up with a use for it. Screwing around with a Seeediuno, making my own auto-ranging ohm meter (almost have it calibrated properly here!). Display is super crisp and super easy to read (the "blooming" around the text is the photo, and not reality). I've read some other reviews about the "small text". Well, the text size is what you make it with the libraries that you use. This display is a DEVICE, YOU tell it what to display. I use VSCode with PlatformIO for all of my development needs, and using the u8g2 library, they have a bunch of fonts. Here are two different sizes, the larger being a double height/width using the u8x8 portion of the library which is text only. I think I'll stock up on a couple of more of these just so I have them laying around.

Save a lot more power than my other screen

I bought this LCD while learning Johnny-Five javascript robotics. With the tutorials and some tinkering I was able to make the screen work. However, I could never full clear the pixels on a refresh (lots of little pixel artifacts remained lit). Bottom line, good for learning, but probably not very useful in application.

الحجم شديد الصغر للأسف اصغر من بوصة , قد عقلة الاصبع

صغير جدا بحجم ضفر تقريبا، يؤدي الغرض بالنسبة لي، لكن اصغر من المتوقع

I expected it to be much bigger from the pictures. However it works as advertised.

Fast delivery