50Pieces Epoxy Mixing Nozzle Static Mixer Nozzle Tubes 17-Element Adhesive Cartridges Tip for 50 ml Resin Cartridge

The product works great so far! I was honestly surprised. I love using epoxy due to the reliable repair and strength but the effort of dumping it out, mixing then try and reapply with a brush or syringe makes it, all the while trying super hard not to get it in your clothes or drip to the carpet it often feels like it’s not worth the effort. Further, you waste a ton because you have to dump out more than you need into something you can throw away, mix it all up really good, and try to scoop it back up and apply to your project Dash so you always end up using three times more than what your project actually requires.Fits perfectly with All JB branded epoxies in syringe form.I did some more research on these to see how useful they would be and two other findings I had. The “Dead space“ in the mixer syringe is at 1 mL or less so there is very little wasted which is excellent. Second, the tip of this syringe is a standard tip used for needles. I can’t remember the exact name Dash it’s not a Luer lock, but it does fit a blunt cell needle tip (see image) it should fit any needle or plastic leur type applicator.Finally, note to the notches in my picture. This fits on the JB syringe in one and only one orientation (like the cap does to actually) Even though it looks like at first you could put it on the right way or turned 180°. It twists shut and locks- so putting a lot of pressure on the syringe to get thick epoxy out will not pop one of these off.So unless Someone here states differently and I believe these to be compatible with only be JB epoxy syringes. All the little notches line up perfectly.Tested Gorilla Glue Epoxy and it looked like it should fit or is very close but it does not. Someone also mentioned incompatible with 3M (I’ve seen those sold elsewhere in this site)I am not paid by this company in anyway, I bought these myself, and I rarely write reviews, but I did this and even took pictures because I have been looking for a product like this for years- at least ones that were somewhat affordable and disposable. I did all this extra work because I am just that excited to have a mixing syringe for the dozens of JB epoxies I use I work.

Definitely work great to get into small tight corners of project, one time use but you get a lot for the price.

Good quality mixer nozzles at about half the price of McMaster-Carr. A little shorter than nozzles I’ve purchased in the past, but still mixes the epoxy well.

customer was happy with selection

arrived on time and in good condition

Don’t fit on 50ml Quick Cure 5 or Locktite epoxies i have.

These have worked great, very happy with the quality and price.

I didn’t think I was gonna need more than three, good thing this came in a big pack. Worked as advertised and worth the money.

They suck to get on right to tight of a fit