🚀 Fuel Your Adventure with Confidence!
The ZPFLL E11015 Car Electric Fuel Pump is a high-performance replacement designed for Cummins and Onan gas generators, ensuring compatibility and durability with advanced materials. Weighing just 340g and featuring a compact design, it’s engineered for easy installation and long-lasting performance across multiple fuel blends.
Manufacturer | ZPFLL |
Brand | ZPFLL |
Package Dimensions | 13.11 x 10.11 x 7.29 cm; 340 g |
Item model number | Car Electric Fuel Pump |
Manufacturer Part Number | E11 |
Position | Front |
Lift Type | Electric |
Item Weight | 340 g |
M**I
Excellent
Excellent
R**D
Good value/price compared to the OEM$
So far, I have only used it for a 1 hour test run, but it worked without any problems. As others have commented, the mounting bracket needed some work to make it fit.
E**N
Very Short wires
I installed one and kept one as a spare. The pump works just fine, but the wires are quite short so expect that you might have to splice in your original wiring. Still great for the price. Time will tell about durability, but at least I have a spare.
R**.
Worked fine
Good
D**E
fuel pump too long, wires too short
The fuel pump is longer than the original pump, so I had to drill new holes in the mounting bracket. The wires were too short, so I had to cut the wires off the old pump and add them to the wires on the new pump.Look for a different pump if you have an HGJAB generator.
D**H
Short Leads need lengthing. Mounting brackets need to be modified.
The leads are too short. I cut 6 inches of lead from the old pump, crimped on spade connectors and attached to the new pump. This connection will be within the generator housing so they will be protected. Using spade connectors will allow easy installation of another replacement pump when the time comes. I used heat shrink on the positive spade connector joint to ensure no shorts.The mounting bracket is not in the same place as the Onan pump bracket. The new pump cannot be mounted unless the bracket is modified. I cut the bracket as shown in the photo and used washers to span the gap.
Trustpilot
2 weeks ago
1 month ago