4-Inch Car Sticker Remover Kit - 2 Pack, Soft Rubber Decal Eraser Wheel Tool for Cars - Safe Adhesive Remover for Glass and Metal - Emblem and Vinyl Lettering Removal with Drill Adapter

Used this to get rid of the leftover adhesive from my old bug shield on my truck and it worked great. It removed all of the stubborn adhesive I couldn’t get off by hand and didn’t scuff my paint or leave any marks behind. After using it, it looked like nothing had ever been there. Huge time saver if you need to clean up old adhesive without damaging the finish.

I bought both the slotted and solid wheel. Far and away the solid wheel works best. I use both on my boat to remove 26 year old striping. The slotted just melted and disintegrated in a short time. Left tons of slag behind and did little. The solid wheel on the other hand zipped right through the whole boat in under 40 minutes with minimal wear or residue. The solid is a better value. Works faster, lasts longer and is much cleaner.

Removed old glue from truck body easily and did not damage paint at all.

I'll start by saying I tried virtually every method I could think of to remove 45 year old cracked vinyl striping from my 25 foot fiberglass sailboat. I tried solvents, special "vinyl remover", paste-type paint stripper, metal putty knife and plastic razor blades with and without using heat gun all to little avail. All the previous attempts combined removed approximately 4 linear feet x about 6 inches of various vinyl stripes with a total time investment of about 6 hours. Today I tried this eraser wheel thinking "what have I got to lose?" I was amazed that with the wheel I was able to remove an additional 4 linear feet of stripes in a total of less than 15 minutes. I was shocked. An added benefit is the wheel seemed to do a very good job of also removing the adhesive layer leaving behind clean fiberglass. Plastic razor blades left the adhesive behind, which had to be removed with solvent. Now for the bad news. The wheel gets consumed fairly quickly. I'm about 1/2 way through the useable diameter of the wheel after removing a 48 x 6" section of stripes. For my 25 foot sailboat that will translate into 5-6 wheels minimum to remove all the decals. But, if your time is worth anything to you, the eraser wheel approach seems to be the quickest way to remove old, cracked vinyl. I did find that the one stripe which was not cracked (apparently it was much newer) seemed to be removed fairly quickly in large sections with a heat gun and plastic razor blades. If you have old, brittle, cracked vinyl decals, I highly recommend this product.

A must have for another’s tool crib. Helps remove the thickest leftover adhesive. Will not damage surfaces while effectively removing the unwanted material.

Worked well! Took the FX4 stickers off my super duty with ease.

I ordered this wonder wheel adhesive removing wheel to help me out getting the adhesive left behind from the body molding off my truck. I've seen these things used before and they really seemed to work great. They probably do in the right scenario but in my case, not so much. The molding had left behind most of the adhesive strip in the truck and this thing would not take it off. The wheel itself ended up deteriorating more than the adhesive. It would however, remove the tiny bit of residue left behind after I had soaked it with solvent and scraped most everything else off. By then I just used a soaked rag to get the rest off. I can say, when I did use it, it did not damage or mark my paint at all. Just like it's supposed to do. I probably just tried to do more with it than it's designed for, so I'm not going to be too hard on it as I can definitely see it working great on stickers or decals, more like it's intended for. I will keep it around for that purpose but I am disappointed it didn't work with removing the molding adhesive. It would've saved me a lot of time.

This unit is the real deal!! It removes old tired, dried vinyl stickers, wraps, signs with relative ease. It doesn't disintegrate within a few minutes use, like the cheaper wheels. I went thru 6 cheap wheels to 1 of these units!! I will always have at least one of these in my toolboxes! I had to remove lettering from the sides and rear cargo box of my 40' box truck. Using this and other techniques on some really badly weathered vinyl I was able to get the job done in about 3 days by myself. (I had more time than $$ to devote to the job, lol). A helpful hint is to use an electric corded right angle drill. One with a moveable second grab handle would be ideal. I forgot I had a regular one until I had hurt my wrists completing one side and the rear with a standard corded unit. Great value for the money! Well made, so please keep it up!! The only complaint I have was that as the unit wears, it tends to wear unevenly, causing an eccentric imbalance that can be very annoying, and this is well before it wears down to the wear line. It's a little more manageable with the RA drill. Another helpful hint: Do NOT let vinyl stay and bake on your vehicle for multiple years! It damaged the paint underneath on my truck!

E' un ottimo prodotto ma mancano istruzioni sufficienti, quindi c'è il rischio che assieme all'adesivo rimuova la vernice sottostante. Avevo inteso ci fosse un manuale assieme ma ho ricevuto solo la rotella.

I required a decal remover hopefully it will do the job.

Excellent priduit

So like an IDIOT, with no research I took to conventional decal removal by adding heat. The 20 year old decals on my truck would not peel off at all. They would not scrape off and no chemical solvent was safe for the paint. Further there was some old double sided glue for trim. Trim came off glue tape stayed. Frustrated I started sanding it all off. Worst choice: it trashed my paint. Like sooo dumb. Sometime later I did some more research and found this product. I seen someone on YT had it and thought Id try it. Man, I wish i had this from the start. It took offer the decals and the glue tape. It took a lot of work and a couple of these wheels but an amazing finish. It did not damage my paint at all. HIGHLY RECOMMENDED for stuck on adhesives. If you got a big job, buy 2 wheels.

Prodotto fantastico, l'ho provato con un trapano a corrente che non supera i 4000rpm ed ha funzionato perfettamente, ha rimosso la pellicola sul tetto della mia macchina senza rovinare la carrozzeria. Per tutto il tetto di una Fiat Qubo ce ne sono voluti 2. Ho avuto modo di confrontare questa prodotto con una versione più economica di una marca cinese che mi ha danneggiato la carrozzeria, meglio spendere qualcosa in più ma fare un lavoro fatto bene.