EZDIY-FAB Vertical Graphics Card Bracket PCIE Slot Plate, Vertical GPU Mount, Video Card VGA Support Kit -Black

Been wanting to vertically mount my gpu for a while and after getting a new case what better time to do it. Just a heads up the description of this item says it only fits open back cases which yes is true if your not willing to modify your case like I have. After some cutting filing and securing the mount my gpu sits on it perfect. If you've chose this and have a bigger gpu it may not be suitable or unless you buy a extra support or strut as the is nothing on this to help support heavy gpu's brilliant item tho. Does exactly what it's ment to

This fits a 4090 rog strix perfectly if you require mounting vertically.

As per the title, the support bracket works as described and is easy to install but I have to return it because it's not compatible with my case, a Corsair 5000d because the case has the pcie slots that cannot be fully removed, so even when you take out the pcie slot covers at the back, there's still a gap and the horizontal lines need to br physically cut out, so not worth modding the case.I will either get the Coolermaster V3/4 kit or just leave it horizontal as it is now.I gave the product 4 stars because it doesn't fit my case but it's not defective and works as advertised.

Not as high quality as expected

When you look at the photo you will see top display port of rtx 4080 fe obstructed by this bracket. I’m fine with that because I’m using only 2 ports, but someone with more screens need to be aware of that. Seller contacted me to consult what’s wrong, promised to fix it with next revision and offered partial discount.

This is a great alternative for the overly expensive alternate options available. It is limited to only 2-ish slot cards and does require some support under the GPU if your pc case isn't made of the sturdiest of materials.

PAY ATTENTION TO THE PICTURES, this may not fit you case, I use Corsair 4000D and I had to cut it with a grinder,Only problem is that the metal is clearly cheap so a big card will bent it and the card will pull towards the side panel even with a GPU support stand

Not good, pre drilled holes on the bracket didn't match up to ones on case, feels very flimsy

Installée parfaitement dans le boitier, nickel. Le seule défaut est que ça bloque tous les ports donc on oublie les cartes d’extension PCI. Il aurait été intéressant que le support amène le GPU vers l'extérieur du boîtier plutôt que vers l'intérieur.

This is an inexpensive and basic adapter piece without any extra sliding rails or support struts. The metal is a moderately thick gauge and I was able to get it to fit nicely in my 4000x airflow case. To anyone else who would attempt this I had to bend the tips of the pci slot covers slightly for it to align. I also chose to drill in the 4 additional holes so all thumbscrews could fit. The case itself had to have a slight bit of the metal between the slots removed so the monitor cable could fully seat. Overall it was well worth 16 bucks and will hopefully stand up to any future card upgrades down the line.

C'est parfait mais malheureusement un peu cher je trouve.Je recommande tout de même.

Gen4のライザーケーブルが余っていたのでブラケットだけで売っているこちらを購入アマゾンではあまり選択肢も無く他の有名な通販サイトでそこそこ種類があったけど時間が掛かるから最速で届くアマゾンにしましたAntecのケースConstellation C8に使用しましたが固定はしっかりしていて三連ファンのGPUもしっかり固定してくれていますしかし残念ながら他の方のレビューにある通り上部固定側のポートに干渉して1ポート使えなくなりました自分はDP2個とHDMI1個の3画面を使用しているので取り敢えずなんとかなりましたがDP3画面となるとこの製品を削ったりしないといけないのではないかと

This vertical mount is made of a good gauge of material strong enough to hold my GPU water block in place with no sag.