Polymaker PETG Filament 1.75mm, 1KG, Black

Love the color of this filament and was worth the price I paid. Prints easy and have never had an issue with clogging or adhesion, but that's always printer dependent anyway. I would recommend polymaker to anyone that has a printer.

I purchased this PETG filament based on Polymakers good reputation for 3D print filament. I am printing on a SnapMaker U1 using the Snapmaker Orca slicer with "Generic PETG" since the slicer does not have a Polymaker specific PETG profile which includes speeds, retraction, etc. This is my first time using PETG and so far the prints have been as easy as PLA with almost no stringing so the generic PETG profile is working well. The prints so far have stuck to the SnapMaker build plate very well. I have to let the build plate cool in order to get the print to release. Layer adhesion is good. Appearance is very good. So far no tangles or nozzle clogs, but these can happen at any time for any filament and any printer. I have only consumed about 110gm of this 1kg spool at the time of writing this review, but I am optimistic it will continue to print well. It is now June in eastern USA so I may have to dry the filament at some point, but I have a good drier. There are less expensive filaments on the market, but I can recommend this Polymaker PETG filament.

This filament printed well, it works with the Bambu labs PETG HF print profile. The layer adhesion is good, and the value is decent if you find it on a sale or buy in bulk. I only used this as a test run before buying in bulk on Polymakers website. The color is decent, it is orange, but it is not as orange and Bambu labs or Elegoo’s PETG HF. All of the PETG I’ve gotten from polymaker has a glossy sheen to it, so keep that in mind if you are making something that doesn’t need to be glossy. TLDR: This filament prints great with the Bambu Labs PETG HF profile, has good layer adhesion and durability, and the color isn’t stunning.

Love polymaker filament. I love this color and as always this prints nicely, no tangles, adheres well to the build plate and the price is always competitive.

Excellent filament. I have been almost exclusive to Sunlu brand but had a customer wanting a specific color. This filament does not tangle, prints flawlessly. End product is smooth and very high quality looking. Works great with my A1 printer. I would say this is great value for a high quality filament.

So glad i finally shifted to Polymaker. The PETG prints very well. Creality was my favorite, but I hated their bulky plastic spools and lack of colors. Polymaker has tons of PETG colors. The filament prints even better than others. It is my new go to. I hate cardboard spools because I use a Bambu AMS. Even though these are "Improved for AMS" or whatever they say....they still suck in an AMS. I am sure they are perfect on an A1 but I am talking about the enclosed. The win: rip off the sides and the cores of these spools fit Bambu compatible reusable spools.

This is a quality PETG that flows as well as PLA. It's also cheaper. Like PETG in general it adheres well. Gotta love the color. Polymaker is an upscale filament source and its filaments are a safe choice. I tend to prefer this brand. The color is a little on the red side with a small contribution of blue in the Hex code color representation. Not known for clogging. Being PETG it wants to print hot. I find 245/75 a typical successful print temperature combination. A reminder, this is PETG. You must DRY this filament if left out for more than an hour in even a moderately humid environment. Note: this was previously sold as "High Flow", which is esential to "High Speed" printing. High Speed meaning it prints as fast as PLA.

Polymaker did a great job when they reformulated their PETG. I never have a problem printing and the green has kind of a pearlescent (for lack of a better descriptor) sheen which you can't see in the photos. Highly recommended.

La marca es garantía

Amazing filament but! read below how to get good results. The filament comes vacuum-sealed with silica bag in it. Unfortunately, it's not helping. The filament if full of moisture and your print will turn out in a spiderweb of stringing and oozing with a lot! of surface defect (popping bubbles). Do the following instead: 1) dry the filemant for 8+ hours. I dried mine at 60C for 12h 2) use the print profile for this plastic for this particular filament. Don't rely on "generic pla" profile, don't dance around with "what is the best temperature". Download the bloody profile. Google it. if you do 1 and 2 you will get GORGEOUS results. See the photos. The vertical surfaces are so smooth I had to find an angle where you'd see any texture on the photo. No print lines, no bubbling, super smooth, super color consistent.

Buen producto

印刷中に定期的に絡んで、ツッパリ。強制印刷中止。 ここまで酷いのは初めてでした。

Excelente producto