LDHTHOPI Buffer Polisher, 1600W 7 Inch/6 Inch Rotary Buffer Polisher Waxer, 7 Variable Speed 1000-3500 RPM, Detachable Handle for Car, Boat Sanding, Polishing, Waxing

Works great no problems so far, its light and easy to use, the noise level was minimal, and it buffs so smoothly, its appearance is really great, the paint correction is so smooth like butter.

This car polisher exceeded my expectations! The unit is well made and comfortable to hold on large surfaces like an auto hood. The machine came with all the necessary pads from course to fine. The other feature I like is the power cord is a good length and doesn’t get in the way of your work. The others remarkable accessory was the custom zippered bag it came with! Excellent for storing the unit and all pads. Great value for the money Definitely a good purchase!

Easy to maneuver, relatively average noise level. Accessory pads are not high quality for the units low price so do not expect that but they do the job. Twin size heads and ergonomics are OK. I do not like the lock button for speed control as it kept dis engaging as i was buffing holding the buffer in a normal manner with my right hand (for me) on the tail of the unit where is where the on/off and lock button are located. Also, i found the handle difficult to tighten w/o fear of damaging the case. Reasonable length power cord, good build quality and has adequate RPMs (1k to 3.5K to get the job done.

Great setup, comes with all you need. The pads are durable, though they might be crushed slightly from the packing and shipping process. I simply laid them out overnight to reshape. Easy to use, multiple handle attachments and configurations allow for great control. Large trigger is easy to squeeze and a locking button helps alleviate stress on your hands. Power/Speed control is easy to adjust, simple scrolling switch. Used the fine pad to polish and it worked flawlessly. Easy to swap out pads, and with an included 6" and 7" pad holder you can swap between polish and buffing quickly. The tool itself seems to be quality, strong motor that handles well under load. It can be a bit whiny-loud at times, with most of the noise coming from the pad spinning.

I barely used this buffer on a couple isolated spots on my boat. The 2nd time using it the motor completely burned up. I was buffing metal flake gel coat, so it was VERY light pressure. I had maybe 15 minutes of total usage on medium speed and it's broken. Since I am beyond the return window, I have no recourse but others should know this product is extremely poor quality.

After reading all the reviews and being skeptical the price point and fast delivery had me sold. Before I used any of the attachments I made sure the unit operated as it should. Found it to operate flawless with no noise or burning smell at all. Used it on all 7 speeds to make sure it was good before returning. Then I put it to the test. Sanding and polishing a windshield. Spent 5 hours straight sanding, and polishing the entire windshield with no issues. I have been using tools for many many years as a mechanic and sometimes it's failure on the user end. I can better all of the 1 star review were from people that didn't know what they were doing when tightening down the quick attachment to the buffer. I am willing to bet they forgot about the lock for the buffer shaft spun the quick attachments on then didn't verify the lock was fully released buy rotating the tool backwards to get it to unlock. Then verify it spun free by hand before plugging it in and turning it on. In short if you don't have common sense or familiar with tools watch YouTube or ask questions or don't purchase items that you seen on YouTube that look easy enough but then you break the tool and give it a 1 star. This thing works really well if you use it correctly.

It gets the job done, but at first it was acting up until i “broke in” the tool, the pads it comes with are poor quality i recommend getting better ones

This product is amazing and gets the job done. I have a brand new car and of course just like an older car, I knew I’d get a chip in the hood. I decided to purchase the Subaru exact match paint and clear coat and began applying the smallest amount of car paint. The paint pen has a large tip and I was getting frustrated with the application. I probably wiped it off with alcohol 5 times. After adding the clear coat, I absolutely hated the results. It looked worse than ever. I decided on using a little sponge on the area to remove the clear coat only to discover it was abrasive to my car. After multiple purchases, Scratchdent, compounds and to no avail, I decided to by an actual handheld car buffer. Easy to assemble, super easy to use and it comes with many levels of buffing pads. I started with the least abrasive and gradually worked my way up to semi abrasive ( the green waffle pad) VOILA, it started to erase the scratches and quickly removed the white haze on my hood. Make sure you get the buffer pad wet before using on a painted surface. Simply put, if it’s dry it can become to hot as it spins on the paint surface and cause marring.. Simply place the compound, 5 daps around the buffer pad and then lightly press down on the paint surface in several sections to evenly distribute the compound. Place the buffer on the paint surface and then turn on letting the machine do the work ( No force or pressure is required) For $60.00 this is a must have for your car, both old and new!! I avoided spending several hundred dollars at a detailing shop with this amazing product. 5 star review

facil de usar....

Al momento de quererla usar para pulir mi carro, se apago y ya no quiso prender, no se sobrecalento, se apago después de pulir media puerta, espere al día siguiente para tratar de volverla a usar y ya no prendió en lo absoluto