eSUNMatte Rainbow PLA Filament 1.75mm, Matte Multicolored 3D Printer Filament PLA, 1KG Spool (2.2 LBS) Gradient Changing Multicolor Filament for 3D Printer, Matte Rainbow Multicolor

This arrived sealed in plastic with a silica pouch inside to avoid moister contamination. I buy filament mainly on colour. price, and if I need matte or silk. After years of printing I see no quality difference between the most expensive filaments and the cheapest.This performed perfectly with good bed adhesion, no stringing at 205°, and no tangles. Overall I can't fault this filament so have given top marks.

Esun vacuum kit, works very well and sealed bags hold there vacuum without any perceptible loss over long periods of time. Electric pump is surprisingly good for its size and cost.

Grate basic filament, prints fine on my Ender 3, Ankermake M5C and Bambu Lab A1.Layer lines are not too noticeable and had no issues with adhesion.Matte filament will always be my first choice, it just looks grate

The pump could have been rechargeable as it needs a USB power supplyMore silica gel would be usefulBags very good and seal well

this was the perfect color for a print i had to do, it has good fusion between layers, and as its a matt textured finish its ready to spray if required, would buy again

The bags seal well and so far I have had no leaks or fails. I use them for storing 3D print filaments. The bags are large enough to easily take a 1Kg spool and a few silica gel sachets. CLose up the ziplock with the tool provided and then extract the air with the USB pump that comes in the kit. Takes about 30 seconds to fully evacuate the air from the bag but it is tight as a drum when done. The bags return to their original shape when the ziplock is opened.

While the pump is great for sucking out the air no matter what after 3 hours the air is right back in there. Have tryed 4 different bags in the set and so far all the same fill back with air after abit of time. Sadly since the whole reason for this is to air tight my filament after removing the water with abit of cooking they dont fulfil the stated job. I will look to other brands to see if I can find a better one but for now be aware theres a chance you can get bags that just doesnt work!Going to edit this. Realized now after about 10-20 mins after vacuuming you can hear all the air getting back into the bag from where the pump is meant to remove air so it just does not seal properly after you are done.

On my third roll in a month and very please with the results form it. I am using it to print 28mm minature figures and tabletop gaming terrain. I think I have only had one failed print the the 100 or so I have done since first using it. Output is very consistant and takes paint well. Using it with an Ender 3 v2.

Facile da utilizzare, è molto comodo in caso di continui cambi di bobina. La pompetta USB all'interno rende veramente semplice la rimozione dell'aria dalla busta, mentre la valvola sulla busta funziona bene

Prints beautifully, and the mat finish helps hide the layer lines. I printed a test cube and my friends could not tell it was 3d printed.

Tout est OK

Fin matt finish, bra pris, enkel att printa, bra tålighet.Printat med Prusa MK3S med 0,6 mm munstycke och 0,3 mm lagerhöjd.

Lange Zeit war ich auf der Suche nach einem Filament, das meine hohen Ansprüche erfüllt, ohne dabei ein Loch in mein Budget zu reißen. Nach einigen Experimenten mit verschiedenen Herstellern bin ich endlich fündig geworden: eSUN PLA Filament.Überragende Qualität zu einem günstigen PreisZunächst war ich skeptisch, da eSUN im Vergleich zu bekannten Marken deutlich günstiger ist. Doch meine Zweifel wurden schnell zerstreut. Das Filament überzeugt durch gleichbleibende Durchmessertoleranzen, hervorragende Druckbarkeit und satte Farben. Druckeinstellungen lassen sich mühelos feinjustieren und das Ergebnis überzeugt auf ganzer Linie.Verlässlichkeit und PräzisionMit eSUN PLA Filament gehören Druckfehler der Vergangenheit an. Das Filament verstopft weder die Düse, noch kommt es zu Stringing oder anderen Problemen. Die Haftung auf dem Druckbett ist ausgezeichnet, selbst auf Glas ohne zusätzliche Beschichtung.Vielfalt für jeden GeschmackeSUN bietet eine riesige Auswahl an Farben und Filamenttypen, so dass für jeden Geschmack und jedes Projekt das richtige Material dabei ist. Ob PLA+, PETG, TPU oder ABS – die Auswahl ist schier grenzenlos.Fazit: eSUN PLA Filament – mein Geheimtipp!eSUN PLA Filament ist für mich die perfekte Mischung aus Preis und Leistung. Die Qualität ist hervorragend, die Druckbarkeit einfach und die Auswahl an Farben und Filamenttypen riesig. In puncto Preis-Leistung schlägt eSUN meiner Meinung nach sogar die teuren Markenhersteller.Absolut empfehlenswert!P.S.: Auch wenn Redline weiterhin mein absoluter Favorit bleibt, ist eSUN PLA Filament eine hervorragende Alternative, die mich mehr als überzeugt hat.