2-Pack IP67 Waterproof Silent 12V DC Cooling Fan - 120mmx25mm 4.72inch High-Speed 3000RPM Dual Ball Bearing 2 Wire 3Pin Exhaust Fan for RV Fridge

Yes I got the 2 pack of these fans. I have installed one and the other -for now- is a spare for possible use on my CB radio. The one I am using is on my KL200P and in my opinion just the right size for the fact of it does 3500 rpm and keeps that little burner cold to the touch when I use it. The fans are not noisy with the dual ball bearings set up. But the little noise you do hear is fan blowing the air not the motor. They come with 2 fan guards for each fan and the screws. The red and black wires do have a plug and for my set up I just cut it off and direct wired into my + and - terminals on my power supply. These fans will work for your equipment and keep things cooled down for you either separately or both wired together. These are great quality fans for many uses. I chose to use mine for my burner. Look no further these are the ones I recommend for your CB stuff if you want to be kool...

I bought one set of these fans and I put them in my UTV, which is Honda it gets crazy hot in there totally enclosed so I drilled in the body around the rear windows and I drilled the appropriate size holes to mount them. Then I wired them to a switch that I can turn on when it gets really hot in there in the summer They move a lot of air and I highly recommend them if you’re looking to move a lot of air from one place to another with a 12 V fan

Running these nonstop for 4 months now in an extremely humid environment without any issues. They are loud but I wouldn't say louder then advertised and they provide adequate air flow for my purposes. Can't say if I will get 6 years but if they make it past 6 months they will be worth it.

Lots of airflow. Used it for a custom humidifier! Works great with any 12v power supply! Accidentally ran it on 24 volts for 3 days and it survived so these are built well.

Please see my disclaimer for Vine provided items at the end of this review. These 92mm appears to be good quality. Frame and blade feel like PBT with a good amount of glass-fill. No complaints on material. These are advertised as "waterproof" fans. I did not test that. I can not bring myself to put a running fan directly into water. I did however pull the cover plate off to check the waterproofing. The back of the motor is well potted, with no voids or imperfections. I would be fairly confident the electronics would not be affected by occasional water splashes. What I do not think it truly waterproofed is the bearings. There is no protection for the bearing to keep water out. The bearings themselves might have some level of water protection, but it is a spinning part. That will only last so long. The bigger concern here is water getting into the hole behind the bearing, under the protection plate, and having no way to drain out. Either the water would eventually get into the bearing, or it would create rust. A plug or thick lubricant to keep the water from physically contacting the bearing would be highly advised. These should be a good fit for outdoor uses where moisture and humidity would normally destroy other basic fans that do not have any method of waterproofing. I have seen many fans placed in environments they do not belong, resulting in rusting, eventually leading to the fan seizing. These fans should work well in those settings and give decent service life. I would advise adding some grease or lubrication to where the bearings are located to reduce the chance for moisture to rust those parts. Performance seems good. I do not have equipment to test air speed and air volume claims, but it does move around the amount I would expect form a quality fan of 92mm x 25mm. Sound profile is a bit drone-like and louder that I would want. I do not have any sound level measurements to test the claimed 37.5db. It honestly feels a bit louder than that. (check the posted video) I like that you get 4 steel fan grills with the kit. My kit was missing 2 screws. There should have been a total of 16, 4 for each of the 4 fan grills. The final point, the power wire. As others have mentioned, it is a bit thin. I did not cut mine to strip and hardwire. If you need to do that to connect these fans to your project, understand that this could be a problem for you. And because these are "waterproofed" fans with potted electronics, you will not be able to replace the power cable with your own wire, like would be possible with many other standard fans. Price seems fair for what these are. They are more expensive than many other 92mm fans, but the waterproofing is what sets these in a higher tier. Price: $23.99 (at time of order) Quality: Decent Value: Decent Vine Review Program Disclaimer: My goal as a reviewer, as part of the Vine program, is to provide clear and informant feedback on product details that matter to YOU. I review every item from the position of a product I have PAID for. Cost, quality, and value are all vital points in the decision to purchase a product. I hope my reviews will be insightful and enlightening for all readers, and ultimately help you make that purchase decision. Leave me a thumbs up if I've been able to help you determine if a product is worth buying.

Ventiladores poderosos.

Running great. Pushes good air and quiet.

I bought these to use in a home brew airbrush spray booth for mostly water based paints. They are not silent but aren't too loud even at full speed. Work great with the speed control sold separately.

Pros: - Includes 2 fan grills per fan for added protection - Comes with mounting screws - Strong airflow at 12V - Good replacement option for desktop computers Cons: - No PWM fan speed control - Fixed speed control via supply voltage only - Noticeable noise level at 46dB from 1 metre - 2-pin connection limits compatibility with some systems The PANO-MOUNTS high-performance 12V 92mm cooling fan (2 pack) has decent quality. Each fan includes two grills and mounting screws. The unit uses a 2-pin connection and does not support PWM speed control. You can only adjust the fan speed by changing the supply voltage. I tested the fan at 12V. It produced strong airflow and measured 46dB at a standard 1-metre distance. The noise was quite noticeable but acceptable for a desktop setup. These fans worked well as replacements in my computer. In summary, this fan offers strong airflow, waterproof protection, and decent build quality. However, it lacks PWM control and runs at a fixed speed. Noise may be a factor depending on your setup.

Good to find a waterproof fan at a good price. Does the job perfectly.

Works very well.

Very well packaged and built.

Fully functional. i like the steel blade protectors included