OBLIQ Galaxy S7 Case, [Slim Meta][Titanium Space Gray] Slim Fit Premium Dual Layer Protection Case with Metallic Brush Finish Back with Shock Absorbing TPU Inner Layer for Samsung Galaxy S7

First off, its a bit pricey for a case if you're used to the cheap stall editions in your local shopping centre... but it is reflected in the quality. THE POWER BUTTON.... everyone has ranted about this on this case but it works fine, it is a little stiff but I wouldnt let it put you off it. If you're a religious one handed user and have digit problems maby look at an alternative. Volume buttons work fine Fitting - perfect with minimal effort, i literally lay my phone in the case and it popped in. Size - it is a little bulkier than anticipated but it is slim for a protective case... they should have made a thinner decorative only version! Grip - fine, it almost feels like car dashboard plastic, lot better than smooth plastic ones. Even with wet hands and fingers! The rubber underneath doesnt feel to bad on your little finger when propping up the device. I had another case the sharp edge used to dig into my finger. Overall a sleek and robust case but because of its thickness it takes a little too much from the look of the phone from the front, but from the rear its spot on. I wouldnt say it feels bulky, just looks it. 4/5... please bring out an even thinner version!

Good case with a snug fit. Hard exterior with a softer internal layer. Bumper bit that sits proud of screen is enough to provide protection. Cut outs for all relevant parts very good with the exception of the power button which fits OK but is hard to press. Volume buttons are fine. Can alleviate slightly by pulling the edge round to the top slightly but is a minor issue.

Fits the case like a glove, very very happy with the product for my Galaxy S7. The case itself it easy to install and fits very very snug which is great and what is needed, it looks and feels very top end, really like the gun metal look. I've had the case for 6 months now it has two layers to it and a natural lip so if you drop the phone face down onto the floor the screen will be protected. I've dropped my phone only once onto a stone tile floor about a month ago, the case saved the phone and there was no damage to the case except a very slight mark on the corner (hardly noticeable, but it saved the phone). I've also added a Olixar thin magnetic strip between the back of the phone and the case to make it easily magnetically mountable. Would highly recommend this case.

This case is great! + Exquisite design + Excellent protection + Looks incredibly smart +++ Fits tempered glass protection, even the ones that cover the entire screen, I thought this was pure genius! + Buttons are responsive and well built Overral 10/10 score product. The case looks exactly like in the picture, this is pure awesomeness!

The case is very well constructed and robust, with a premium feel. As others have mentioned the power button is very hard to press, which degrades the user experience of the phone.

This is a stylish case with a very good build quality that fits the phone perfectly. The only problem is the power button which is a bit stiff. 4.5 out of 5!

The only real positive I can give this case is that it looks nice and it's relatively slim compared to others. However a case is designed to save your phone from a drop. I dropped my s7 from waist height onto the floor and the screen completely broke (one crack under screen but whole touchscreen broke- £170 repair....). The case hardly showed a scratch so perhaps I was unlucky with the way it fell flat on its face. Either way it didn't do it's job. The back of this case is VERY SLIPPY which is probably why I dropped it. Anything that makes you more likely to drop your phone can't be good. Really couldn't recommend this case

Awesome accessory to protect my Galaxy S7. I used to have an Otterbox for my old phone, which I loved, but the 'defender' they do for the S7 is just ridiculously large. The design of this case complements the style of the phone. It looks classy. Some people have commented the buttons are hard to press. This thought crossed my mind when I first got it, but either I don't notice it anymore or the buttons have loosened up (probably the first) - either way, it's not an issue at all. I've had it a while now and have thrown my phone all over the place with no problems whatsoever and the case has stayed in pretty good condition itself. The downsides are that the back feels a little 'plasticky' although it looks fantastic and the brushed back of the case is more slippery to hold than the glass back of the phone, but it's no way near as slippery as my HTC One used to be.

Biggest problem I have is that the case adds a good amount of extra bulkiness to the length and width of the phone, but seeing that it really isn't that avoidable for an S7 case, I won't dock a star for any review I make for a case. The case is slim in the sense that it doesn't add bulk to the back where it doesn't look like a fancy brick. The case fits snug and is still comfortable in my pocket, which is something I mainly look for in a case. The case makes the phone easier to hold, where the glass exterior of the phone tends to add slickness to being held without a case. There is also a mild lift in the case so if you place your phone face down, the screen doesn't touch the table, which I tend to do sometimes. The design is beautiful in my opinion. The brushed steel look is actually plastic, but that's better seeing as some real metal cases can cause problems with wireless connections. The hard case doesn't wrap around completely over the rubber inner casing, which I find adds more to the design, this also makes the case easier to remove and install compared to other cases where you have to install and remove both layers separately. The side buttons are chrome plastic it seems, but it adds a nice look to the darker color of the casing. These buttons have a nice feel to press, there's no looseness to the buttons and you can feel the press of the button underneath. The cutouts at the bottom and back are well placed, it doesn't obstruct any of the cable ports or speakers. The back cutout isn't separated between the camera and the finger sensor, but this makes sense because the finger sensor would be difficult to use if there was a divider between the cutout. Also for those who use wireless charging, this case does not obstruct charging, it works perfectly. Overall this is a great case, if you don't need extreme protection but do drop your phone from time to time from table height distance, this will definitely protect your phone.

Excelente funda. Se adapta perfectamente al teléfono, es muy elegante y robusta. Permite acceder a todas las funciones del terminal, el NFC funciona también perfectamente. Una compra magnífica a buen precio. El envío, 1 día antes de lo previsto.

Ha salvado de varias caídas a mi celular, está muy bien hecho y tiene muy buen diseño. Muy recomendable para proteger con estilo tu S7

Solide, protégé bien le téléphone! J’ai du m’en séparer après avoir changé de téléphone mais j’aurais aimé continuer à l’avoir!

Muy buena calidad y diseño. Protegen mucho el teléfono y ajusta perfectamente sin ninguna complicación. Sacar de la caja y montar. Un poquito cara, pero merece la pena. Muy buen producto. Reconendable