COOLWEST 24W LED Power Supply Driver Transformer 12V DC 2A - Constant Voltage for LED Strip Light G4 MR16 MR11 GU10 Bulbs

On one side of our kitchen the LED under lighters stopped working. After checking the obvious (fuse) I delved deeper. Swapping a controller then the transformer from the other side I narrowed it down to the transformer. After searching on Amazon for a replacement I was surprised to see so many different ones available. Are they that unreliable? Anyway, I simply picked the cheapest - this Coolwest. Took all of 2 minutes to replace and it works fine. No issues at all. Bargain!

Great product and quick delivery

We bought this transformer to resurrect a LED strip light that had failed because of the transformer. This transformer required very elementary wiring ( if you can rewire a plug you can do this) The strip lighting now works a treet.

Small and easily installed. Reliable so far.

Good quality LED driver, unfortunately I had to return it as I ordered the incorrect wattage. Money refunded no issue.

Bought this just over a year ago but only just go around to installing it. It was supposed to be driving 4x 5 watt bulbs, so a total of 20w. It's rated at 24w so I assumed this would be perfect. Sadly not. It just flashed all the bulbs on and off which suggests it's not rated to even 20w. I took one bulb out and it was fine, so clearly rated between 15-20w. Very unreliable though and now too late for me to return it.

Bought it to replace a tranformer that was used to power 4 x 20watt halogen spot lights in my kitchen.Id replaced the halogen with LEDs and there was a noticeable flicker with the original transformer. This one was a good price easy in install ( i kept the original splitter which connected the four under cupboard lights and just wired it up to tbe new trasformer ) and does the job well and no flicker !

Pro: works well at 1A, gets very slightly warm (not a problem). Con: slight buzzing noise at 1A. Connections are very small - but seem to work well, if you make them sensibly; i.e. make sure the cable is secured by the clamp-down covers. EDIT: when it's been running for about an hour, the buzzing gets really annoying (I am in a fairly quiet, small room).

Prodotto valido e materiale plastico robusto. Non scalda durante l'utilizzo anche se utilizzato quasi alla massima potenza nominale. Abbastanza sottile e quindi facilmente occultabile. Piccoli difetti riscontrati: Lieve ritardo all'accensione e morsetti un po' piccoli. Con fili da 0,75 ho fatto un po' di fatica.

Tengo una lámpara que usaba 7 bombillas g4 de halógeno de 12v de 20w y la quise cambiar a led de 3w cada una, es decir un total de 21w, pero al hacer el cambio a led las bombillas titilaban mucho y es por eso que compré este transformador, solo tuve que instalar los cables en el orden indicado en el mismo transformador, ahora con 24w las bombillas no titilan o parpadean para que me entiendan, Muy barata y de buena calidad.

Compakter LED Trafo einfach zu installieren.Für geringe Wattabnahme bestens zu empfehlen.Erzeugt kein Flackern der LED's.

Bonjour. Tout d'abord, j'ai fait cet achat pour remplacer une ampoule GU10 halogène en GU10 Led, qui consommée trop à mon goût. Avant j'ai dû changer le transformateur car celui-ci clignotait quand j'ai mis directement l'ampoule GU10 Led dessus. Normal, car ce n'est pas le même amperage. Ce transformateur est parfait, pas trop grand, pas trop gros et pas trop épais. En ce concerne les branchements pour les fils, moi qui connaît rien en électricité, j'ai réussi à les brancher du premier coup et correctement. Si j'y suis arrivé, tout le monde le peux. Je ne peux que vous recommander ce petit transformateur de bonne qualité et de prix correct. Si mon commentaire vous à plû, merci de cocher que cela était utile. Cordialement.

12volt cc funziona uscita testata voltaggio corretto ,un po’ scomodo il ferma cavo ci si riesce a fissare cavi finissimi un cavo 2 X0,75 chiude appena appena ...