ElitechSTC-1000WiFi TH Pre-Wired Humidity Temperature Controller 110V 1100W 10A Mushroom Greenhouse Homebrew

Excelente producto muy exacto… fácil de operar… lo recomiendo

This device has been working flawlessly for me for a month now, controlling cooling and humidification in a 4' x 4' grow tent. I initially set it up on the unit itself, then set up the app a few days later. I have 2 other temp/humidity meters in the tent near the sensor for this device to get a feel for how accurate it is, and all 3 of them are within a degree/1% humidity of each other so I'm satisfied with it's accuracy as wellI'm not sure why this device has so many reviews about how hard it is to set up, the manual is pretty well written and easy to follow if you take 10 minutes to read and understand it. The whole thing, not just some here and there.The setup if done on the unit itself and not the app is *very* easy to do. You press and hold setup, and the display lights up the 2 or 3 letter abbreviation for the setting you're changing, you can press up and down to scroll through all the settings to get to the one you want. You press setup again to confirm thats the setting you want to change and you change it with the up and down, press setup again and the setting is stored. The abbreviations are all listed very clearly in a nice table in the manual, all in very clear English and not poorly translated chinglish.I can only assume all the bad reviews are from people who refuse to actually take the time to read the instructions and take a little bit of time to understand how to operate a controller that's got only 3 buttons, but 17 different settings that can be adjusted.

This is the second one one I've bought, both work awesome. A little confusing to get started but the instructions are clear. Cheaper than other brands too

Only been a few days, controls are nice. Needed to read manual but that's never a bad idea. There are alot of parameters lol!I have several heat and humidity controllers, I'm exited to get the wifi working, if only for data logging.

I purchased this Elitech STC-1000WiFi Pro TH controller to replace a failing wifi controller from a rival big brand that has a well-known flaw in the sensor, a flaw which makes it unusable if the humidity is over 90%. I need this unit to monitor incubating reptile eggs that require mid 90's humidity levels. This new Elitech has a much better sensor, as well as a fantastic overall build quality. Also, there is no physical runout on the humidity sensor which prevents correct readings if you need to calibrate to compensate for high humidity environments. It is very accurate and the sensor sync time is minimal when compared to other brands.Both heat and humidity are well within the advertised ranges, but can be adjusted to match scientific instruments if you need to. This unit can be set to display the temperature in both C or F. Cooling or heating can be controlled in addition to humidification and dehumidification. You select which of these tasks you want the controller to perform.Also, the multiple logs and data which can be accessed via the app are very detailed and easy to read.I have read some reviews which state that the app is difficult to install or setup with this unit. This is simply not true and the process is not complicated at all. I highly recommend using the app to control this unit since it is so simple to use, and it has more functions and features than is available by using only the buttons on the controller.First, go to google play and install the iCold app, but don't choose the one that says "free" in the description. Next, make sure you are using a 2.4 GHz network. All modern routers are dual band and allow you to set up a separate 2.4 GHz network in addition to your default 5GHz one. LOTS of other devices require the exact same type of installation procedure, so this is something you need to learn know how to do anyways. After creating and naming your new 2.4GHz network, log into it instead of the wifi network you normally log into. Open the app, select the plus sign to "add device", then scan the QR code on the back of the controller when it prompts you to do so. It will automatically connect to the device after about 30 seconds. Afterwards, follow the screen prompts and select the new network you created and input the password for it. Your controller is now ready for use!As with any app, this app is intuitive and you can use the tabs and options buttons to navigate around and explore all the features and settings. In addition to setting up the controller functions, you can also set up alerts, add additional users, change the display timeout, turn the controller on or off remotely etc,. After making some changes, allow the controller up to one minute to update in the app. This mostly applies to display changes, such as C to F, or calibration modifications. The app for this Elitech controller is very well-thought-out and is much, much, better than that of any of its competitors. I say this after using dozens of hi-tech wifi controllers from multiple manufacturers over many years.NOTE: This unit DOES keep it's settings if power is interrupted or turned off, just make sure the sensor is plugged all the way in and that it is seated properly, or you may get an incorrect reading once it is powered back on.This is the best temperature / humidity controller I have used so far, especially at such an affordable price. You won't be disappointed!!