🔧 Split the Signal, Not Your Budget!
The BOOBRIE 2-Pack SMA Connector Splitter is a high-quality, low-loss adapter designed for seamless connectivity in various applications, including FPV drones and Wi-Fi antennas. Made from durable brass, this splitter ensures optimal performance with a 50 Ohm rating, making it a must-have for tech enthusiasts looking to enhance their wireless setups.
| Finish Types | Brass |
| Warranty Type | Limited |
| Unit Count | 2.0 Count |
| Item Weight | 0.01 Kilograms |
| Package Quantity | 1 |
| Connector Type Used on Cable | Coaxial |
| Number of Ports | 1 |
| Compatible Devices | GPS |
| Specific Uses For Product | GPS |
D**S
Works
Does its intended function.
W**E
correct dimensions and handy for scanner enthusiasts
these are handy adapters - i use them for my 2GHz scanner discone antennas which use N connectors, along with gear such as the ICOM R100 scanner, which has separate UHF and N antenna inputssome AOR receivers also provide N connectors, such as the AR AR-ONE receiver - these connectors come in handy when i want to deploy mine for scanning operationsgood connectors and handy to have in the boxrecommended
L**.
Good thing they are cheap.
One of these worked great but the second one came apart when I tightened it down.
D**N
Good if only finger tightening.
I purchased these for outdoor use. I like to go just beyond finger tight when installing 259/UHF connectors outdoors. Well, the male side (bottom of the "T") came clean off with just a bit beyond finger torque. Appears there is not even a outer shell weld (or not much) between the top and bottom of the "T". I would not use these outdoors, even if you don't do the extra torque, because if they break this easily, obviously this is a path for water incursion. So, not too happy with this purchase. Now if all you are going to do is use these indoors and barely finger tight, go for it . . . . although outer shell continuity might be an issue if there is no weld. Not very good quality, but probably OK for indoor use.
W**3
Male parts are nit right size
The male connection parts are too small in diameter
M**B
High Loss after about 1GHz
In fairness to Boobrie (which has been very reliable for the cables I've tested so far) - there are no frequency specs given for this splitter so giving it three stars may be a bit unfair. However...based on my expectations for a typical SMA connector - these appear to be very lossy after 1GHz - which struck me as unusual.To perform a simple test (Using a NanoVNA which allows testing up to 1.5GHz), one has to go through some "adapter gymnastics" since these are RP-SMA. Therefore - there is some possibility that the extra attenuation could be coming from one of the adapters. (If I had had more adapters - I would have tried them out). However, everything else was properly calibrated (several times, actually), and, as you can see from the S21 frequency response, there is a -3db from the splitter at low frequencies as you'd expect (a calibrated 50-ohm load was at the other side of the splitter) - with increasing losses- esp after 1GHz. If I had a manufacturer's specs to compare this with I'd know if it was underperforming. But, without that reference - it appears as though this is a higher loss than expected.
L**S
Good quality!
Great addition to my tool box.
H**D
good pricing
good quality. quick shipping will buy from again.
Trustpilot
1 day ago
2 days ago