FH Group Front Set Faux Leather Seat Cushions - Seat Covers for Low Back Seat, Universal Fit,, Airbag Compatible Seat Cover for SUV, Sedan, Gray/Black

Nice faux leather that seems very durable, soft and cushiony but don't interfere with the heated seats. The grey goes nicely with the tan leather interior. Gives a very nice update to my 2007 Acura MDX.An Acura MDX doesn't have an open split in the back (between the back and seat) which made these difficult to install. You could feel where the disk had to go but getting it positioned where it would catch and not slip out is tricky but can be done!It did get easier after the first disc and figuring out which tools worked the best.Instructions ***** CLOSED SEAT BACK***Take the headrest off first, then pull the back seat cover into position. This takes a bit of work and it's easier if the cover is warm. The cover didn't fit the seat precisely but it was ok. I think it will mold better to the seat once it gets really hot.Now just set the bottom cover on the seat. Hook the disc into the elastic loops. Its paramount they're attached correctly!Now the tricky part. The object is to get the butterfly edges of the disc to slip behind the back of the seat and move it to a vertical position. The top of the disc catching seat back and the bottom of the disc catching on the seat cushion.I used two smaller,open ended wrenches. I positioned those on either side of the elastic with the C part hooked into the disc so I could "push" the disc deep into the split in the seat. This is where it gets tricky. I pushed so the bottom flange went deep down behind the seat cushion....far enough to where the top flange can clear the cushion edge of the back of the seat. I had to used a wide flat screwdriver to push the upper flange into a vertical position.That's it, that's the hardest part. It takes a lot of feeling around so you know the disc is secured vertically and not going to slip out. I found it helpful to lay the seat back a bit initially and the set it up when I was pushing the upper flange into position.The rest is a piece of cake and you can follow the regular instructions.Reminder....the instructions I've shared are specific to a car seat with a closed back, where theres no split opening behind the seat.

The covers are high quality and they fit perfect in my Tundra 2004 SR5 - 4 door. Easy to install and they don't look cheap, very nice

I have a 2016 Honda Civic Coupe and I think they look great! I was hesitant at first especially with the price tag but I love them. My car looked updated and sleek.I purchased them because I have cream/beige seats and my kids stained then pretty bad so I needed protection and my friend had similar ones in her civic. Front Seat:They fit pretty well and are easy to install. There's a slight bulge in the backrest area (they need to be a little tighter), but it's not bad. I've gotten compliments and I love the new look. I got some for my back seat as well (the bottom parts were slightly too tight but fit well enough).Dislikes:What I don't like are the headrest covers because they do not cover the sides. I don't understand what was so hard about making a cover on the sides too. I guess for a more universal fit, but it annoys me. So, I got some black headrest covers to put under under. It still doesn't look that great because now the beige backing under the leather headrest covers is more obvious. I wish it was black under as well.I also do not like the metal oval name/ company emblem or whatever that's in the middle of the front seat covers.Tips:The back of the seat cover does not cover the entire back seat. I knew that and didn't care because the back if my seats are black anyhow. So, if you purchase the black seat covers, you may want to purchase cheap black seat covers to go under, just so the black blends well.Watch the video first. The installation is easy though. It took maybe 5 mins total for the front seat. You don't have to even raise the headrest as suggested (at least with my car I just raised them a little)Back seat:As stated earlier the bottom seat covers in the back are a little too tight for my seats, but still look good to me. I'm hoping they stretch later. I didn't spend much time fiddling with them yet.My back seat headrests do not detach. So, I just tucked the stake in best I could and it's looking good.The backrest part fit pretty well.i had to let me seat down to make it easier to tuck the sides in. Spoon was working as suggested, but it was faster to let the seat down first.Quality:I only had them in for a few days, so I'm unsure of quality. They feel comfortable though. But, if they're wear out too soon I'll definitely come back here to update my review.

When buying, Amazon said that, individually, the front would fit my Kia Telluride, and the back would fit as well, but not the set? I bought both anyway, and they fit perfectly! They're so nice and soft, make my black leather seats not so hot, and I actually love that the don't cover the whole back of the seat so you can access the original seat pockets, and because the Telluride has charger ports on the back of the seats that I can get to easily. The back bench seats are so nice as well because they're able to move easily with the split seat because of the zipper and Velcro. Highly recommend these.

Covers look good, but poor filament and Quality. For $150+ I would have expected a better product. Covers do not fully cover headrest, product has been installed for less than 2 weeks and is already falling apart. See pictures from where I get in and out of my truck.

No suelo dar reseñas , pero si quiero compartir de que este producto es una maravilla , había buscado unos protectores , pero todos al ser 'unitalla" pues lucen mal. Estos los use en un honda Civic 2012 y se ve excelente, el ajuste es perfecto. Por dentro viene con una textrua que parece que ayuda a que no se mueva. Esperemos que con el uso se mantenga igual. Ampliamente recomendable .

La calidad de los materiales es excelente , su instalación fácil , el verdadero problema es la información confusa de la publicación , dice asientos delanteros y al ver fotos de los asientos traseros asumí (culpa mía ) que era un juego completo , tanto asientos traseros y delanteros , y no , SÓLO SON LOS ASIENTOS TRASEROS , buscando bien , hay una publicación que aparentemente es un juego completo , 1500 más caro , pero completo, de otra manera comprar los dos asientos delanteros por separado resulta carísimo , deberían arreglar esa información.

Me gusto

Absolutely great!! They look super stylish, good quality and comfy. Fit perfectly on my Toyota Matrix. I was also able to install just one side of the covers, because I still use a baby seat on the other side.

Fits great, I have yet to secure the side straps, but it fits well - the middle section is adjustable to ensure fit and I still had some cover sticking out on the sides, I was able to tuck it in the side of the seats so that it covered everything (I actually like it that way). The covers are kind of cushioned on the back of them too. The colour is also spot on, perfect match to my Nissan Rogue's Platinum Reserve "tan" interior leather which is a nice surprise. This should keep my seats clean from my 140 lbs dog and salt-covered wheelchair wheels in the Winter!