3 Pack Galaxy S23 Ultra Screen Protector Tempered Glass 3D Curved Edge 100% Fingerprint Unlocking, Scratch & Impact Protection HD Clear & Smooth Touch for Samsung S23 Ultra

4.5 stars rounded up to 5 assuming you get one that the glass is perfect. After I had mine installed I noticed from a certain angle there was a very very slight small dimple in the glass. There's no way you can see it from most angles or when the screen is on but it indicates as other reviewers stated the weight isn't well secured to it can slightly dent the glass if your package happened to be handled without care. So minus 0.5 stars for that. The glass is very fragile too but that's why they give you multiples of them. They are meant to sacrifice themselves to protect your phone's actual glass screen, not meant to be bulletproof for years.Got this for a lower price than the similar adhesive UV-based tempered glass protectors from name brands. The application process is virtually identical. Just be careful to follow the instructions in the video to a tee. Don't do this in an impatient rush! (Or you'll be a < 4 star reviewer) Also note, the glass with UV adhesive type protectors are the only glass protectors that will both work well with the fingerprint reader and not have a visible circle where the fingerprint sensor is. You will be tempted to buy the cheaper stick-on glass protectors but they will either not work well with the fingerprint reader or will have an ugly circle on the protector where it is. Your only other option is a plastic film protector which will not maintain the smooth glass finish like glass will but will work as long as you don't mind replacing it once in a while.Here are my tips to ensure a successful application:- Remove your S-Pen so the bottom of your phone is flat when you put the sticker on it.- IGNORE any reviewers recommending a specific amount of drops of adhesive. They put the amount of adhesive in the little bottle for a reason. Do not worry about making a mess, the excessive adhesive is easy to clean off the sides of your phone and very little gets on it. It's nothing like super glue even after cured. Have a paper towel ready to dab and/or wipe the sides and your fingers. If you do not apply enough adhesive you will need to start over and throw away the protector! If you get a very small bubble near the edge you can *maybe* gently push it with two fingernails like you are trapping it and move it down and off the edge or corner but if you have a large bubble or dust you can't lift the protector and fix it. You'll need to toss the protector and start with a new one.- If you want to be extra cautious (like me) I applied scotch tape around all edges of the phone so I could easily peel it off and didn't have excess adhesive to wipe off the phone. However on the sides, only apply the scotch tape about 2/3 up the edge so the tape edge doesn't come too close to the edge of the protector. Just enough to cover the buttons. Otherwise you'll end up glueing the scotch tape to the edge of the glass and when you lift the scotch tape up you'll lift the protector up and have to throw it away and start over (I found this out the hard way.)- Make sure there are no bubbles in the adhesive before you lower the protector. It should be a perfectly clear pile of adhesive. Stir it surg the tip of the bottle to get any tiny bubbles out.- Note that the back protective film on the glass sometimes does not peel off when you remove the sticker so you need to use your fingernail to peel it off. But be careful because you can easily break or contaminate the glass.- After removing the phone so you can apply the UV light to the edges. Before applying the light wipe the edges of the phone with the leftover alcohol wipe then a paper towel then the little cloth wipe. This will ensure you don't have any cured adhesive just past the edges of the glass (which isn't hard to clean off if you do but best to make sure the phone edges are clean before applying the UV light.)- The alignment tool will by default leave more of a space at the top of the phone than the bottom unless you use the slider to push the glass up more. I prefer to have the larger gap at the top and a very tiny gap at the bottom. WHY? Because after you put a case on, the glass will meet or be slightly under the bottom of the case so when you do your swipe gestures from the bottom of the glass edge up, you won't feel the edge of the protector. When the glass is aligned like this, the top of the glass edge is perfectly aligned with the top edge of the actual lit up display and just covers the entire camera. Plus it's very hard to see the gap anyway. So I recommend just sticking with the default alignment of having a larger gap at the top.- FINALLY, there's a decent chance (venture to guess 1 out of 3 chance) that you may end up with one or two very very tiny bubbles or dust specs as we all don't install these in a "clean room" lab. If you are OCD, then fine, toss the protector and start over. BUT, for the rest of us, if that happens I recommend you just accept it. Why? I guarantee you won't notice one or two tiny specs under the glass the next day and forward. You will only notice them if you look for them (which you will do right after you install it.) In my opinion it's WAY better to save the extra protector for later when you might REALLY need them to replace a cracked protector.OVERALL: Great value for tempered glass UV adhesive protector. Easier to install than it sounds if you follow the video and my tips. Fit the phone perfect with slight space for phone case edge. Glad I chose this over film even though application is a little more complicated. Not for the impatient and in a hurry.Fingerprints may or may not work after but they definitely work a lot better if you retrain your fingerprints after installing the protector.

Update!!!! The Note 20 Ultra has a really thin ear speaker slot at the top of the screen that gets clogged with the glue making it difficult to hear people you are trying to talk to. You must ensure you do not get the glue into the top ear speaker slot. It is so thin I didn't even know it was there. I was able to clean out the glue with my little fingernail and get my phone volume back. I still say this is a great screen saver, but the earphone speaker slot issue needs to be addressed in the instructions. I was about to warranty my phone cause I couldn't hear anybody anymore when I figured out the problem.This is the best screensaver I have ever used. I can't even tell I have a screensaver installed! The fingerprint sensor works as it should. Re register your prints after installing the glass. It comes with 3 glass screens, 3 bottles of goo, the phone frame and the black light, etc.. Make sure to watch the videos closely, take notes on the steps, including the amount of light time for each step. I recommend adding an additional minute for each light time. Make sure you start on a level surface. Make sure to cover ALL of the speaker and mic holes. After putting the liquid on the screen, place the glass on the ramp. The liquid will start to distribute evenly as you pull the ramp back. If you see any bubbles at this point, push the ramp in and out a few times until the bubble disappears. Once you are bubble free pull the ramp all the way out and continue to follow the notes you took from the video. The installation process is simple to perform, but it is not something you can just slap on your phone and go, it takes time. I was nervous about doing it but I took my time and found out that it really wasn't hard at all. I was concerned about the 'goo' being hard to get off if I ever had to replace the glass. I am on my second glass now and there was no issue with removing the goo. It wipes off easily.

I’ve had this for one day, but I’m already sold. Installation was super easy, and the screen protector went on perfectly the first time. I was worried about the fingerprint sensor at first, but after re-registering my fingers, it worked flawlessly – no issues at all.I’ve always been one to put a solid screen protector on my phone since they’ve saved me more than once, and this one definitely gives me the peace of mind I need. Before this, I couldn’t find anything on the market that wasn't either flimsy gel films or those cheap ones with the annoying fingerprint imprints. Plus, this one’s way more affordable and comes with more material than the competition, and the clarity is on point.So far, I’m 100% satisfied. It’s only been a day, but with 9h durability, a clear screen from an easy install and working great with my fingerprints, I’ll keep this as my go-to. Highly recommend if you’re looking for something that actually works at a great value without getting fleeced!