Pack of 2 - Hola! Music HM-MTH Microphone Music Stand Tablet/Smartphone Holder Mount - Fits Devices from 6 to 15 Inch

It's sturdy, stays on the stand, holds my iPod securely, and was a good price. Happy with this purchase...

*** May, of 2022. Still using it very consistently. A good purchase. ****** Update almost two years later. I still use the thing all the time. Still a great piece of equipment. ****Original review*Originally purchased a while back. I wound up with a larger tablet recently, and inquired to the seller about purchasing only the longer arms to accommodate the larger tablet. The seller offered to simply sell me the complete newer model at a discount. I don't know for sure if I needed to disclose that, but I've seen others do it, so figured that I would as well.So, this has been a wonderful product for the price. As with a lot of things that claim to be universal, there are some tradeoffs. It has multiple joints and moving parts that are meant to accommodate various screen sizes and angles. Overall, this holder seems to do that well. But more points of movement means that there are more potential points to wear out. I've noticed a little bit of loosening from my original one, but nothing so far that would make me not completely trust it. The actual frame seems well constructed.It has attached securely to every mic stand that I have encountered, and I've never not been able to find a decent viewing angle.I'm giving this product five stars, would highly recommend it for those of you looking for a versatile tablet holder, and would purchase again. That said, I'll give you my few critiques:The actual arm ends (round parts) that contact the tablet could be a little bigger in order to accommodate thicker screens, or reasonably sized cases. The ones on there do flare out somewhat, but a little more flare wouldn't hurt.The only other issue has been that the it would be nice if the frame was extended out about half an inch to an inch further away from the mic stand. There have been a couple of times when, for whatever reason, the mic stand couldn't be extended very far, so the tablet would actually be bumped up against the mic adjustment handle (the metal rod that you tighten when adjusting the boom angle). That said, I realize that a longer extension would also make it less stable. And, the device is versatile enough that it has never been a major issue, just a minor annoyance.I'm just nitpicking at this point. Overall, it has been an awesome product at a reasonable price. I would highly recommend it to someone looking for a basic, but yet effective, universal tablet holder.

**UPDATE 2021: I ordered another one of these for a second tablet and was very, very pleased to see that they increased the depth of the pegs at the end of each leg for the larger brackets. I can now fit my iPad securely WITHOUT having to remove the cover. This is a BIG plus. The only potential downside is that if your device is too thin, it might not be quite as secure as it would have been on the shorter pegs (the smaller brackets included with this package still have the shorter pegs for thinner devices).--------------------Original Review January 2020:I've been using this for several months now and giving it a pretty good trial, constantly setting it up and taking it down each time I use it. I found this plenty sturdy for an iPad Air with a 10.1-inch display. I used one short arm and one long arm holding the top and bottom of the tablet. I will say that, as others have noted, the round wedge pieces at the end of the arms are not long enough to fit over my iPad and the case. But I've found it sturdy enough to just attach it to the case (not an Apple case) when folded behind the tablet.The bracket for clamping it to a stand is a fairly thick gauge metal for such an inexpensive product, and the size of the clamp allows it to fit onto a relatively large diameter tube (larger than any music stand or microphone stand I've ever used). While the clamp and bracket are heavier duty, the entire tablet holder assembly is less heavy duty plastic. It's more than enough for typical tablets (and I'd even feel safe putting a Windows Surface on it), but I wouldn't trust a heavier laptop on it, even though the long arms would likely allow a larger laptop to fit. In addition, the plastic screw knobs holding the arms and the knob which adjusts the tilt of the arm assembly are asking to be stripped if they're seriously over-tightened.Overall, I'm most impressed with the value. Given that other tablet holders are going for 2x-4x the price of this guy, from my experience, the value more than compensates for the few areas where it lacks the heavy-duty features of its most expensive counterparts. And so far it's proven at least equal in durability to other options that cost twice as much.

I got this holder to allow me to place my Samsung Galaxy Tab S tablet on a leg of my camera tripod when I am controlling my camera with it. It does the job very nicely, with one exception: If I could have the ideal holder, it would allow a quick release of the tablet. This one does not, but in its favor, it does provide a very secure mounting and I am able to remove the tablet quite easily.The tripod is carbon fiber and the diameter of the section to which I'm mounting the holder is 1.12", so I was afraid it may not have worked. No worries! The clamp is able to get around the leg with a little room to spare and it has a rubber screw tip and rubber on the clamp arm, so that it does not damage the carbon fiber. It provides enough grip to hold the tablet securely.It comes with a second pair of "Y" arms to allow it to hold larger tablets, but even with my 10" tablet, I was able to use the standard ones.This is a quality piece of equipment and it looks like it should stand up well. I'd give it 5 stars, but I reserve that for things that truly exceed my expectations. This was better than I thought it would be, so I'd give it 4.5 stars if I could.

I used this now instead of my Hercules. Comes with 2 sizes of holders so any size tablet will fit. It is heavier than others, but is is also made of metal. Fine by me. I like the construction. I also like that it can be adjusted a bit off to the side at just about any angle. No negatives.

Comes with two support "y" 's for smaller and wider....one more medal L bracket would be great but either then thar like it a lot..

Can imagine the long hours this designer would have spent on designing and creating such an innovative, useful form every angle, pun intended product. Only a performer WOD know it's value.

Tiens très bien ma tablette. Seul hic, serait bon avoir caoutchouc plutôt que plastic pour tenir. Bon produit. Je l'aime beaucoup.

very good

Awsome