UV Resin - 500g Hard Type Crystal Clear Glue Ultraviolet Curing UV Resin for Jewelry Making Crafts - Transparent Solar Cure Sunlight Activated Resin for Casting and Coating, Resin Mold

I'm pleased with this product, I've bought it a few times. It's the only one I will use.

The media could not be loaded.  I use this resin to cure my keychains I create, I’ve never had a customer complaint and find the resin very easy to work with and quick to cure!I do find the resin smokes at the start of curing however my lamp is good and powerful so it could be that, the resin is crystal clear and I haven’t had any signs of yellowing, all in all it works well for what I use it for & I recommend it!

UV resin - before you buy this product you need to know that you will need few accessories in order to use it.They have to be moulded - so buy a set of moulds. The silicone ones for decorating cakes will do too, just make sure they are perfectly clean, otherwise there will be imperfection in produced product.Then they have to be dried out - what we found is that UV lamp work best. The higher vol the quicker the results.If you having problems with creating check out YouTube for how to videos, they were very helpful for us.It will be hit and miss at the beginning but after a few goes it will get better. We have spent hours doing these and my niece was very happy with it.I recommend it to older kids as it require precision work. My niece is 11 and she was very happy to receive it as a birthday gift.

As a sculptor and model maker, I have used polyester and epoxy resins for more years than I care to remember, and recently thought I would carry out some experiments using DecoRom hard UV Resin, and I have to say I'm impressed!..I should perhaps also point out that I also invested in a small UV tourch as recommended, and I would advise anyone buying UV resin to do the same, otherwise you will be missing out on one of the most impressive reasons for useing UV resin.Unlike the other 'two component' resins I use there is no initial mixing required, which in turn mean less air entrapment. You just squeeze the required amount out of the bottle into a silicone rubber mould, or apply as required and shine the UV tourch on it for a minute or two (sometimes less).The consistency of the resin is what I would describe as "gloopy" or a little thixotropic, a bit like warm golden syrup, which means it's good for building up on, and coating objects.It was a gloomy winter's day when I carried out my first experiments and this gave me loads of time to work the resin into the intricacies of the mould, and disperse entrapped air before subjecting the resin to UV light.The UV light has to be able to penetrate the resin to produce a positive and complete cure, and this is an important fact you need to keep on mind. Use translucent silicon rubber moulds, do not use too much pigment, or filler,or you will be disappointed in the results.I believe UV resin has been developed for it's clarity, and translucent affects, so if you are looking to create opaque objects, this is not the resin to use.I only used small quantities and didn't detected any odor, so I was more than happy to use it in the house.I also purchased the relevant UV resin pigments, which are very concentrated and therefore must be used sparingly to produce a wide range of vivid translucent colours.Application of UV light almost instantly cures the resin, but the resin doesn't reach its full hardness for a few hours, or longer periods of UV light exposure.Would I recommend DecorRom resin to my friends? Definitely, it's great fun!

Great resin. Very low viscosity so flows well and reduces bubbles.One downside is the smell. Used lots of resin brands before, but this one is VERY chemically, even after curing.

I have used this product for a long time now and feel it is worth a review.the product itself is neatly contained in a sturdy container with an easy to remove lid. The curing could not be simple, either leave in the sun or use a UV torch which is my preferred method.Several months have passed since I used this product and the items I made with it have stood the test of time very well with no damage or yellowing which is usually what happens with UV resin.I have also used this product to join two pieces of a 3D print from a resin printer together with no mess and with great ease.This is a product I will continue to purchase as it has worked well for me.

I didn’t want to leave review but it seems impossible to contact the seller.All orders I received last month the resin was a lot thicker than normal, the two I’ve received this past week are like water.It’s a shame as before this, this resin was my favourite but looks like I’ll have to find another now.

I have been using this resin to paint onto rocks the last a few days and it’s been successful.My family have started to seek and hide rocks around the local area. The idea is that you paint a rock, hide it, someone finds it and posts to the the Facebook page and the rehides it. Usually I seal our rocks with ova glue, and while this is adequate I thought I’d try the UV resin instead.The resin is easy to paint on, just dip the brush in and paint it on. Then leave the item to dry in the sun. Sadly we are having rubbish weather so our days are not so bright and it’s taking a couple of hours to set, that’s okay though. My brush cleaned easily with warm soapy water and there was no mess. I would say a little will go a long way as I appear to have hardly made a dent in the bottle.