DeepCoolLS520 SE WH Liquid Cooler 240mm 4th Gen Dual-Chamber Pump 3100RPM 280w TDP AIO Cooler Anti-Leak Tech 5v-3pin ARGB Fans CPU Water Cooler Infinity Mirror Block for AMD AM4/AM5 LGA 1700/1200

Very good cooling performance with basically no compromises. Easy to install. Barely even needed the instructions. Swapped the included thermal paste for Noctua NT-H1. Dropped my CPU temps by 30C under load compared to an air cooler.ARGB integrated perfectly with my existing controller.Cautions: there was a very loud vibration noise from the Deep Cool fans. I was able to isolate it to the fans themselves by stopping the blades with my hand. The noise was directly related to the fan blades rubbing on something, maybe the radiator; not the pump. I solved this by swapping the Deep Cool fans for some known-good Aigo fans I already had.The pump does make a buzz sound on every reboot but it only lasts for a few seconds.Overall I am extremely pleased with it.

I love the look, very clean and works with the rest of my rgbs. I have an older mid atx case and the design limits me to a 240mm radiator in the front. If I try mounting a radiator to the top it interferes with the motherboard. However, the 240mm keeps my Ryzen 7 77000 nice and cool. On air-cooling it would hit 70c easily, I'm getting usually 20c less than that now if not cooler. Great product.

The media could not be loaded.  Ok, so when I installed this in a machine I put together for my daughter, I followed the instructions to the letter. It's a socket 1151 motherboard. (ROG Maximus Hero IX). When I powered it up, in the UEFI it immediately showed thermal throttling at over 89C. I pulled it back off and discovered that the pre-applied thermal paste was not disturbed, wasn't touching the CPU at all. I went back to the spare parts and found the socket 1700 spacers are a bit shorter, so swapped to those. Sure enough temperatures are excellent now. So not sure what happened there when I used the spacers labeled for "115x" ... I would love to hear from the manufacturer as to WHY I had to use socket 1700 spacers on an 1151 board to make contact with the CPU. Otherwise this is an excellent cooler and a great value! Plus is looks GREAT!!!

Make sure not to over tighten screws or the fans will make noise. Took a minute to route all the wires for the RGB but once installed keeps my 7800x3D cool and it’s pretty quiet. Not bad for the price.

The media could not be loaded.  It's a very pretty aio cooler, straight forward to install, and it works. Only had it for two weeks. However, ever since the first day I turned it on, the pump will randomly go from silent to a loud rattling/grinding noise. Loud enough to hear easily through the case at my chair. I thought it might be trapped air, so I gave it a few days, shook the tubes, tapped the pump, tipped and shook the case. Nothing stops the rattling noise from the pump. Once it starts the grinding noise it doesn't stop unless I turn the PC off for a while and come back to it (and eventually it will randomly start rattling again). It also doesn't sound like bubbling or gurgling, it just sounds like a grinding motor. Watching the pump speed I have noticed when it's silently running it is at max 3150 RPM. As soon as it starts rattling it drops to 2550 RPM and stays there. It does this consistently. Also the pump speed does not respond to user changes in BIOS, not sure if that's by design or another fault. Really wanted this to work, but I'm going to try exchanging it and see if it's just a bad example.

It presents very good temperatures to my ryzen 7800X3D, 66° playing in a tropical climate 26°, wonderful. Easy to configure with MSI Mystic Light if you have a MSI moterboard...

Still waiting on cpu to finish build but I love how it installed and looks amazing

This CPU cooler blows so cold that my room is colder than it used to be. Will be borrowing a space heater to offset the extra cold temps I'm generating when I'm working or gaming. Since I recently upgraded to the Ryzen 7 5800X which is known to run hot, I've been keeping it between 28° Celsius and 60° Celsius under load. I've got it oriented with the radiator across the top of my PC with the block lower than the radiator and the fans pushing air up and out the top of my tower. Took some configuring the RGB to get it working but once I did, it's been really nice having more color to look at.

Purchased the aio to replace an MSI AIO on the verge of failure. Unit is very simple to install and integrated seamlessly with other RGB components in my system. Works well to cool my 5600x under load and the pump remains quiet, the rads fans are typically drowned out by my system fans due to an aggressive fan curve for my 6900xt gpu. All in all an excellent value and product.

I did extensive testing of this versus an air cooler of the same brand. Both are good but this water cooler rungs considerably coolerNow... Without the low speed fan adaptor included in this model, it runs pretty noisy. Add the adaptor and it runs very quiet. Thermal performance is still quite good with the lower fan speeds.

Acquistato per raffreddare un i5 14600kf, questo DeepCool mi ha lasciato piacevolmente sorpreso. Acquistato principalmente per via delle ridotte dimensioni del case (Itek Dark Cave), riesce a tenere le temperature sempre basse anche durante le più lunghe sessioni di gioco, nelle quali la CPU raggiunge al massimo i 75°C.Le ventole sono abbastanza silenziose, solo ad alti giri il rumore diventa percettibile, ma aggiustando un po' le curve tramite i vari software il problema è tamponabile.La pompa è silenziosa e svolge bene il suo dovere, soprattutto in questa versione rivista denominata SE.L'illuminazione è gradevole ed è egregiamente gestita dal software di cui disponete o tramite controller.L'unica cosa che mi sento di consigliare è quella di sostituire la pasta termica pre-applicata con una migliore Artic (o simili), poiché quest'ultima risulta essere poca e già parecchio secca.Consigliato per chi non vuole spendere più di 120 euro.

The media could not be loaded.  Très jolie , de bonnes perf, rends super avec mon NZXT H7 Flow !

The product works very well. A bit too big for my case, but once installed the CPU temperatures are adequate.