DeepCool SC700 ARGB Hub 12-Port 5v-3pin Aura SYNC Addressable RGB Hub with Magnetic Backplane

Ignore the negative reviewers saying that they lied and that it doesn’t control PMW. This is a bunch of Bull and those reviewers are computer illiterate and can’t read apparently.Yes this hub DOES indeed control via PMW. HOWEVER.... it only uses PMW IF THE FIRST FAN CONNNECTED IS A 4 PIN PMW FAN!!!! This is because this fan hub works by allowing the Motherboard to read the fan plugged into slot one’s specs ONLY. Once you program your curve in your intended software for that fan, the hub them relays the PMW signal to all the remaining fans plugged into the hub.Aka, whatever you are telling the fan in slot 1 to do, the rest of the fans will do the EXACT same. You CANNOT program each connected fan individually. This is because THIS IS NOT A FAN CONTROLLER! Fan controllers provide power to the fans themselves, thus it can program each fan separately. The drawback to controllers is if you have a ton of fans, you need a crap ton of controllers or else your fans won’t work as it can’t supply enough power (I tried connecting 5 Noctua 140mm 3000 rpm fans to a single controller that said it supplied 10W to each fan and if I run those at any faster than 40% speed, alarms go off like crazy and fans shut down. I can’t actually run more than 3 of those fans to a single controller and I have 14 in my rig. So yea... I’m not dropping $650 for enough fan controllers for them all. That’s where this hub comes into play)Tips:Try to only connect identical spec’d fans to the same hub. If I connect all Noctua industrial 140mm 3000 rpm fans to a single hub I can occupy all open slots. It is currently running 9 of these bad boys at almost full speeds no prob (that’s like a 95-110W draw. Insane)However, if I connect a couple of the odd ball fans I inserted into my rig (3 NZXT 2000 rpm Aer 140mm fans, 3 120mm Thermaltake ring fans, 2 EVGA 140mm Rad Fans) into the hub with some of those noctuas, not all the fans will operate at all sometimes. Usually a system reboot fixes this but it does happen. So FYI, pair fans by spec to hub.Example of my current setup.- 1 of these hubs with 9 of the noctuas running all my noctuas working intakes from right side, front and bottom- 1 hub at the rear connected to 4 noctuas running in exhaust at the top and rear.- 1 hub in center of case beside mobo running 6 NZXT 140mm Aer Rad fans for my aio’s-1 hub on backside of mobo plate in center of case running 3 140mm Thermaltake Ring Static Pressure fans and 2 EVGA 140mm Rad Fan positioned in front of various components using diy mounting options inside case like in front of ram and gpus because I run multi gpu setupsNote: This is a dual rig system. Hence the insane amount of fans. The case is a Thermaltake WP200 (tower and pedestal combo)

I have had zero problems with the hub and it solved the under powered problem with too many daisy chained fans not running or starting up properly at low speed while connected to single motherboard fan connector. With its Sata power connector powering the hub the same fans ran perfectly. Looked so small, but works so great.

Deepcool is the best company for PC cooling. Magnetic. Easy to install

If you have an 'old school' style PC case like I do (Corsair SPEC-02 from Back In The Old Days) you know that cable management was not at the level it is nowadays. I grew tired of the 'black spaghetti look' and bought this hub to remedy that issue when I 'resurrected' my kaput PC build.The hub works well enough, connects all of the aRGB lights and fans into one easy to tuck away unit, and looks good if you're into mounting it in a more conspicuous way. That said, the magnet is WEAK AS WATER and will NOT hold well (Might just be my case finish though, so YMMV, but have some double-sided tape on hand anyways)... That's really the only complaint I have, and it's minor.Not a bad unit for the price.

i have 9 case fans, aside from my cpu cooler. 9 fans!!! and this hub has 8 connectors. i daisy chained my front 2 fans, and plugged the rest in individually. this thing kept the back of my case much cleaner and reduced the rats nest of fan cables. i also appreciate that i didn't have to daisy chain 9 fans together lol. the included velcro was a nice touch!

It's a smart product design and it does the job. Currently running 7 fans thought it in PWM. Power for all is handled fine with the sata connector. Just make sure you read the product decription carefully and understand that only the first fan connected will be identified to the system for PWN and all other fans will be addressed in tandem. For this reason, it could probably be said that it's best practice to use all of the same model of fan for the most balanced possible airflow performance (but this is ultra nitpicky of course).

Fans were acting weird with my previous controller so decided to pick this up. Works fantastic and affordable. The PWM does work perfectly and also woth the software FanController if you have that installed. Would 100% recommend.

I would give 0 stars if I could. I have 2 of these and no matter the configuration of fans, LEDs, etc, they do not at all work. No power to the fans and no control of lights. They are just bricks and don't power anything.

This looks and works great, simple to set-up built well and the magnet sticks much better then you would expect all for a good price.

The media could not be loaded.  Tenía problemas con mi luces argb, los cuales fallaban o no respetaba los colores como debería ser, ya que mi tarjeta madre solo tiene un puerto argb, esta es la mejor opción, el adaptador se coloca al puerto y mediante la conexión sata se alimenta y del Hub se conectan todas las luces y funciona exactamente.

Makes inside of of and a lot tidier

Macht was es soll und funktioniert einwandfrei.

Contrairement à certains commentaires, tous les câbles tiennent très bien. Top avec ses 10 connecteurs Argb 5v