Palisade Interlocking Vinyl Waterproof Wall/Backsplash Tiles for Kitchen or Bathroom in Polar Frost (4.5x11 in. Sample)

Hard to cut had to use a jigsaw but very strong and once you get the hang of it pretty easy installation .I put it over existing tile looks great . I used liquid nails and did it slowly in layers

These tiles are amazing!!! They are so sturdy and easy to install. They have a very high end look. People actually thought they were marble. Super easy to clean and maintain.

Decided to order 2 different types of samples and was not disappointed. Will definitely be ordering more soon.

Corners and tight spaces were a bit of a challenge, but this was the fastest, least expensive way to turn a tub into a walk in shower. They should last forever and be easy to clean. It was easier to install safety bars all around than it would have been with tile.

This product is very nice and it is beautiful when finished. It's an easy project for a DIY'er and probably for those who don't consider themselves as such. My wife and I selected the Carrara Marble product (see photo) and love it! It installs quickly with one of the recommended adhesives that you can find in the manufacturer's FAQ on their site. I used the Loctite Power Grab Ultimate that I found at Home Depot and it worked great. Highly recommend the manufacturer's installation videos. One note on those though...in the videos they never mention being sure to install the product with the groove part of the tongue-and-groove facing up. I had to read that in the written installation instructions. That seems to be a pretty important fact that the video should cover.One note of caution: if you elect to cut this product with a power tool (I used a table saw), be prepared for a mess. This will be less of a problem for those with a shop or if it is nice weather and you can cut outside. The problem is that the PVC "sawdust" is very clingy - which is to say, is electrostatically charged. It gets everywhere - especially on you! I elected to score (with a sharp utility knife) and snap the last couple pieces and while it takes a bit longer, since you have to cut the score a bit deep to get a clean edge (never as clean as with a power saw) I would likely do the next project with this product, that way.One other note about the star ratings that Amazon asks for. I wasn't quite sure how to rate "Easy to remove". What??? In the end I gave it a 1-star because if I ever did need to remove it from the sub-base I installed it on (painted sheetrock) I would be prepared to have to tear out the entire sheetrock sub-base. That Power Grab adhesive is PERMANENT!. SO, I think the question is kind of silly. Removing this stuff would be no different that removing ceramic or porcelain tile. Specifically, be prepared to destroy the sub-base.

Easy and looks good

My challenge was to remodel a shower for less than $1000 (Including the shower floor). I had never done it before but after watching some videos on youtube I dared to do it. The shower was previously painted and I WILL NEVER DO THAT AGAIN, what a mistake so I tried to remove as much paint as possible with a paint stripper.Palisade tiles are a quality product and very easy to work with. The tools what I used was a good knife, 2-Ft Level, Speed Trim Square and a Jigsaw for all cuts. Double checks all measurements before cuts and placement in order to avoid any mistakes.Love this product, looks very good and NO MESS with grout, even for my shower floor I did it using the Tile-On-Tile Method.The challenge was met, for less than $1000 I completed the entire shower remodel.See attached pictures!

Wanted Marble and got it but two pieces in the box had gold in it

Used on our shower on the boat, looks very good, really brightens up the shower. You will need ~20% overage as the tiles are 'click' and need to be oriented correctly.

Great tiles, unfortunately FedEx was a bit rough with a few boxes. They ship two boxes together, which makes for a heavy package and FedEx clearly dropped one on the corner. Palisades made it right, their customer service promptly replaced the broken tiles and I was able to complete a nice install.There's videos on YouTube if you want some good tips and instructions. I did a full bath surround and was heavy on the glue and silicone, using just over 3 tubes of gorilla construction glue and 1.5 silicone. That includes silicone beads between each tile, along the tub, the corners (I don't like look of the Palisades corner and edging), top and ends. I then put a peel and stick edge and it looks great.My bathroom is brighter, and I took the opportunity to change the shower head and faucet. Overall a great upgrade over a weekend. Highly recommend.

This is the second time Ive used this product, as a tub surround in 2017 which still looks great and has had zero issues since installing. I just installed in a walk in shower in the basement, and as before, its quick and easy to install. The product measurement come as advertised, add 10% in area before ordering to account for cut offs, more if you decide to glue up using brick layout. I did not order the special corners... I cut tight to the corner and used 100% silicone sealant and never had an issue. Use a good construction glue, spend a little more on that.

Love the look of this product, east to install. But it scratches very easy. Had one piece scratch just putting the plug in through the cut hole. Wish it was a little more durable.

Had my shower redone using these tiles. Watched the contractor install with ease. No grouting, no fuss, just glue to apply. Very easy to cut. I had a few tiles arrive damaged, and dealt with the manufacturer directly. Very cooperative and received replacement tiles promptly. I would definitely recommend and would purchase again.