Bantoye 10 Pcs Needle Tip Glue Bottle Applicator DIY Quilling Tool Precision Tip Glue Plastic Liquid Dropper Bottles (30 ml)

I have quilled for many years using the glue puddle and toothpick method. As it tacks up fairly quickly, I go thru a lot of glue. I saw someone quilling on YouTube using this type of dispenser and thought I’d give it a try. Being skeptical, I filled one of the tiny bottles only half way figuring I would have less to squeeze out when it didn’t work. Was I ever surprised! It works like a charm. When using, I place it uncapped tip down, in a small glass candle holder that I have fitted with a piece of sponge in the bottom. I dampen the sponge and squeeze out all excess water. (If it’s too wet, the water will wick up inside the needle.) The tip has never clogged using this method. Even with hands full of arthritis, the glue is fairly easy to dispense. The long, thin needle allows for placement of tiny amounts of glue with precision. I cap it and keep it upside down in the same jar when not in use. I made over 50 quilled snowflake ornaments with this tiny half filled bottle and unbelievably, it’s still very close to half full. It has already paid for itself in glue savings. And there are lots to share with family and friends.

Purchased for multiple uses - mostly to have various glues (CA/Wood/Tacky) in smaller applicator bottles for miniatures and for colored glues for another project. The main things you need to consider when buying these is (1) how you'll fill them (the opening is very small) and (2) if you need to reuse them with something else. I'll address that after my overall impression. LOVE these bottles - they're perfect for carefully applying glues to small parts. I was also able to get a steady flow with Elmers glue without surges & very few air bubbles. Never had trouble with the metal nozzle clogging, but a sewing needle or pin should easily clear any obstructions that may occur. I love that you can remove the rubber topper & attachment loop without removing the nozzle - I needed it out of my way in one application, so just removed it easily, then put it back on when I was done. I honestly might buy another round of these for other glues or for paint - I can think of so many good uses. HOWEVER, it is worth noting that the thicker your glue/paint/whatever substance you're putting into this, the harder you will have getting it to come out steadily without hand cramps - it's just obvious at this nozzle size. But the screw-on lids never budged for me. I would be hesitant to use with water or bleach (non-viscous materials) in that I can't guarantee you'd have the precision & control you probably desire. As to the aforementioned notes: (1) I was able to fill these fine with my Elmers glue bottle tip as well as the Aileen Tacky Glue, but struggled with the wood glue as well as my glue/paint concoction that I mixed on a plate. It's not impossible - I just used stir sticks to drizzle it in while making the bottles suck the glue in, but also worth mentioning that I'm very patient. There are mini funnels you can purchase for micro glitters that should help. (2) For my paint/glue concoctions I realized that the small opening would cause issue for switching out colors. I had a fluffy pipe cleaner that I used to help the process with soap & water, but might be tedious with multiple switches. Liquids I've put in these with no issue: - Aileen's Tacky Glue - Elmers Glue - Wood Glue - Acryllic Paint (a little too thick for this applicator, but not impossible to use)

I got these bottles based on some reviews that said they used these for Aleene's Tacky Glue. This is the glue I have and specifically got these bottles because I needed a way to dispense this glue in a precise way. I thought they would be perfect, so I ordered them. As a product, these bottles are very nice - they are soft and squeezable, and the caps screw on snugly. The needle point tip is securely fastened and doesn't leak. HOWEVER, I put in my Aleene's Tacky Glue and had a very hard time squeezing it out. I am not a weak person, but I don't have the grip of Supergirl, either. I had to use two hands to squeeze out a fine line of glue and this was too hard on my thumbs for any amount of time for the average card making needs. I did discover that Aleenes's glue can be thinned out with water, so I'm trying that in order to get it through the nozzle a bit easier, but I haven't found the right ratio yet. I don't want the glue so thin that it won't do it's job, but it needs to be thin enough to get through the nozzle. For those reviewers who were able to use Aleene's Tacky Glue in these bottles, please let me know how you do it - what's the secret? Or are you just super strong? Thanks!

The bottle mouth is so tiny, it is hard to fill, but works GREAT once it is.

Perfect for my craft glue! Nice air tight little bottles that are very easy to handle. Definitely recommend.

Work as they should.

They work okay for what I needed them for - Medium Flow and High Flow Acrylix Paint filling of etchings. The high flow acrylic paint has a bad tendency to leak out from the threaded part of the cap, even though it’s marketed as leak proof, so I often end up with paint-covered hands. Also, the high flow acrylic paint drips out with no pressure, because it’s too low viscosity, so I’m have to find a smaller needle diameter bottle.

Perfect for Glitter Tattoos! It takes a bit of effort to pull out the needle tip but once you do, these are perfect squeeze bottles to apply glitter to small areas. I love these! The only negative thing I can complain about is the plastic is not transparent and I cannot see each color. They are a bit cloudy but Its not terrible. I recommend!

صغيرة جدا مقبوله بس عند صب اي لاصق داخلها يكون ذلك صعب جدا وخاصة انها ليس معها قمع

Using for light oil - they work well and are leakproof when closed. would also work for thin ACC or other watery glues. Cost is low enough they could be considered disposable if they get clogged with glue.

Perfectos para el pegamento o goma traga cantos.

Excelente, súper, muy buenas para el masking fluid...enjuágalo rápido y así no hay problema de que se tapen. Yo le pongo un plástico adherible entre la tapa y el cuerpo para que no se ensucie la aguja si no lo voy a usar pronto. Lástima que es importado y no llega el mismo día :( eso me ha detenido de comprar mas!

Facilite les petits bricolages, facile à remplir et à nettoyer, évite d'utiliser les grosses bouteilles.