KeylessOption Key Fob Replacement for 1998 1999 2000 2001 2002 Chevrolet Chevy Silverado Suburban Tahoe GMC Yukon Sierra Oldsmobile Keyless Entry Remote Control, 3-Button 15732803-2 Pack

Excellent, excellent, excellent!!! This was my 3rd purchase in a week, trying to find remotes that could be programmed to my 2002 Silverado 3500 diesel. My previous two purchases stated they would work for my specific vehicle, however neither of them did. These remotes immediately programmed to my truck and work perfectly!!! The range is great and the build quality is as good, or possibly even a little better than my OEM remotes. If you’re like me and are having trouble finding good quality remotes that will actually work with the vehicle that they say they will, buy these…Thank me later! 😉 I highly, highly recommend these remotes!!! 😄

Worked great on my 2000 gmc sierra took only 2 minutes arrived fast and in new condition tho I couldn’t get it to work on my 2004 gmc envoy I will try it again today I didn’t buy it for that car so I give it 5 stars still

I wish GM would go back to programming these from the inside of your truck and no computer necessary, it was so unbelievably easy to program them. Took literally 5 minutes to do both. Plenty of YT videos available to show how to do it.

Works great and look like they are good quality.

Updated Review 1 Star - both remotes lost programming within a couple days. Old factory remote still sends a signal, but both of these aftermarket remotes completely disconnected. Second remote wasn’t even near the car most of the time. When the first one went out, we tried the second remote and found it wasn’t working either. Complete and utter junk. Take a risk if you feel like it, some complained of the same issue after a few days, some after a few months, fortunately for us, we were still within the return policy! Returned for a refund. Previous 4 Star Review - Instructions absolutely do not work for THIS 2000 Chevy Silverado. I tried over a dozen times.. maybe more than 20! Different configurations, different speeds, I pressed and released the buttons and then held them, then tried just holding them, I tried checking the batteries, I tried going faster with the key switch on/off… then holding the buttons even longer than a minute, I read through all the reviews again and found different variations.. one guy said something about toggling the key 3 times instead of two.. but nope! none worked! The car would respond by unlocking the doors once the “enter programming” sequence was complete, but it would never take the remotes. I was literally about to give up and send these things back when my friend came across a YouTube video in Spanish. The guy explained the same exact procedure, except he said, “take it slow”, then “completely remove the key from the ignition” before holding the buttons on the remote. So!… I go through the same procedure, but this time real slow with a second gap between each action 1) close all doors, 2) hold unlock, 3) toggle key on and off twice, 4) release unlock switch… except this time… 5) pull key out of ignition before holding the bottons on the remote.. I held the remote buttons “lock” and “unlock” for about 20 seconds and was about to say, “nope… doesnt work”.. when all of a sudden the car responded and unlocked the doors! Immediately programmed the second remote and then exited programming. I have no idea why some guy on here says you have to first press and release the lock/unlock buttons on the remote before holding them.. because that doesn’t work at all. The instructions that I found by following the QR code, do not work on my friends 2000 Chevy Silverado. If you have trouble programming the keys using the instructions, don’t go “fast” as described. Go basically as fast as you can speak each step normally. Then completely pull the key from the ignition and hold those two buttons until the car responds. I’ll be back to ding this 4 star review if these remotes don’t hold up!

Very durability, easy to program, fair cost

Works with our 2000 Chevy S-10 ZR2. For a while there I never thought the truck was going into programming mode because the doors did not go into the lock to unlock cycle after releasing the unlock switch on the driver's side. I found only one thing different than the programming instructions and maybe this will help someone else. The instructions tell you to enter the vehicle and make sure all the doors and windows are closed. Next, it tells you to hold down the unlock switch on the driver's side and turn the ignition to on and off twice and let go of the unlock switch and wait for the locks to cycle from lock to unlock which let's you know you are in programming mode. Well, I did this numerous times and not once did the locks cycle from lock to unlock like the instructions said. The doors never locked and unlocked, they just stayed unlocked. I was getting frustrated to say the least and even went back to the Internet to verify I was doing this simple task right. Then as I was about to give up I was listening very carefully and I could hear a faint whining noise like something had turned on so I said what the heck, I held both the Lock and Unlock buttons on the first remote for about 20-30 seconds and sure enough it locked and unlocked the truck. I did the same thing for the other remote and original remote and both of those were programmed too. I then turned the ignition to on to exit programming mode. My word of advice is that it is possible based on the year of the vehicle that the locks may not cycle from lock to unlock after releasing the unlock switch when the vehicle enters programming mode. I can tell you with 100 percent assurance that this lock and unlock cycle never occurred on my Chevy S-10, the locks stayed unlocked and the truck went into programming mode anyway and I was able to make the new remotes work after almost 20 minutes of frustration.

These were easy to program - just don't have both of them in the vehicle when you're programing as one gets erased by programing the second. It doesn't take much time to program each fob. I ordered red to be different, but that could be handy in a fleet situation. They seem well-made. The circuitry is protected by a rubber gasket- type cover inside the hard plastic. They work well & are well worth what I paid.

Really easy to program, and worked as described. Only issue so far is, once I programmed the second one, the first one stopped working. Haven't been able to have them both work at the same time.. yet. Update: I reached out to them directly, and to program both, when you're dine pressing the lock/unlock on one remote, do the same on the other one, before opening the door to end the programming phase. Both remotes now work as expected. Next test... longevity 😁

Excellent product. It's working well with my GMC yukon 2001 SLT

Excelente calidad y precio. De las mejores compras que he realizado. Buena calidad, funcionan perfectamente. Para la programación, hay que seguir paso a paso el procedimiento y ser paciente.

Works as intended. 2000 Chev 2500. Easy to program. Followed YouTube instructions.

No se programa el control