POFET DIY Speaker Kit Soldering Practice Kits Electronics Kit Remote Control Available Bluetooth/USB Support with 3W+3W Stereo Amplifier

Bought this as a project for my 15 year old son who has recently decided he wants to Ret his hand at soldering. Have to say this is a superb kit with everything included to build the item all you need(even had a couple spare led and resistors)is a soldering kit. The instructions leaflet is ok but the images and English translation aren't the easiest to see or read- however there is a qr linking to a video which is helpful and also there is a YouTuber called Branchus creations that built a very similar kit live on YouTube which also helped with the building of this kit. My son and I really enjoyed building this and he was really happy with the end result and I have to respect his choice to play Fleetwood Mac as the first song he chose to test the item with. Brilliant kit, works perfectly

As people have noted , the instructions are not great, but following the QR code on the leaflet gave enough information. The kit went together fairly well, though the PCB is not great quality. The most fiddly part is getting the 10 LEDs positioned when soldering so that they line up with the holes in the case. As others have noted, longer screws for the PCB plus spacers would help. The on/off switch did not work, so I bypassed that. The main problem was that on completion one of the speakers was a lot quieter than the other (barely audible) , so the already dubious sound quality was spoilt completely. It was the speaker at fault, as when swapping the connections on the Bluetooth board over, the low volume followed the speaker. Amazon's return policy meant I could get a full refund, but no replacement parts, so the unit was returned

Quite hard to follow as instructions are not clear, also only one LED was working in the pack!

Ordered for my son as he was getting into soldering. He found the end tricky as it was quite tight but persevered and got there in the end.

really disapointed with the item, the main chip for the leds and its holder were crushed (see photo) and even when i straightened the pins out, non of the LEDS worked when tested

No instructions, no QR code, impossible to put together, returned !

Great fun kit to practice soldering! My only negetive is it needs longer screws and spacers for the curcit board to fit properly!

Easy kit to build, some fiddling aligning the led to fit PCB to case. It works and first time but after 2 hours one of the leds failed but there was a spare in the box now ok? Bluetooth works great and sound ok for a cheap kit, well worth the money in my opinion

Explications en anglais, pas très claires. Pour mon fils de 12 ans . Peut être trop jeune mais aide obligatoire de son père, pourtant très à l'aise avec l'électricité et les composants.

Que está muy bien y facil de montar ,y además se conecta muy bien con el bluetooth en resumen ,muy curioso

det var svårt,inte på svenska

Divertente da montare, soprattutto per chi approccia per la prima volta con l elettronica e le saldature. Sicuramente una maggiore spiegazione dei componenti per chi è alle prime armi sarebbe gradita. In modo da poter studiare il circuito e capire cosa si sta andando a fare. Per il resto ottimo.

schaut gut aus. Anleitung war ganz ok. Sound......naja könnte besser sein.