Birch Plywood Veneer Roll Wood Veneer Edge Banding,3/4 inch*25ft Edge Banding, Iron on with Hot Melt Adhesive, Flexible Wood Tape Sanded to Perfection. Easy Application Wood Edging

Used the product to help hide a router mistake I made while building a cabinet door. Worked well to cover up the problem. It matched the birch lumber and was almost invisible after putting polyurethane on the door.

Very nice the iron is spot on. Worked really good well

It’s pretty easy to use also easy to adjust. Looks good and holds well to plywood edges.

easy to install used to trim my bar

It's OK, however the glue is thin and doesn't bond at the corners real well. Not as good as I have used in the past. After varnished might be fine. I am using an oil finish so this will not work.

This product is absolute garbage, the overall cut is uneven, it is finger jointed approximately every 36 inches. Probably great if you don't care what your project looks like but I care how my work looks will never buy again.

SEE EDIT BELOWI wrote to the seller and received no reply. The description says that the edgeband is .6mm thick (the thickness of a typical good quality edgeband). The picture says it all—half that thickness. If you use this on plywood be aware that the plys will be visible through the edgeband. You can only lightly sand it with 220 grit sandpaper or finer without sanding right through it. I had no problem with adhesion as others have mentioned. This is frequently due to user error from 1) not using enough heat to fully activate--melt--the adhesive or 2) moving the iron too quickly which yields the same result.EDIT: The seller eventually contacted me with an apology for misrepresenting their product and they have removed the .6mm specification. I was pleased with my interactions with the seller. Although not very punctual, I was satisfied with their response to the problem.I don't believe the product has changed, just the description, so be aware that the material is very thin.

This worked perfect. I was wondering what I could use to make the handles to my baskets in this worked great. Easy to work with n held up great. Color matched perfect n I was able to hot glue it with no problems.

Great quality. easy to install.