Monitor Wall Mount - Gas Spring Single Monitor Arm for 14-32" Full Motion TV Mount with Height Adjustable Tilt Swivel, Single Stud Perfect Design, Max VESA 100x100mm up to 15.4lb

Right off the bat, if it came down to it, I would not buy this screen mount. There are better options at this price point.Installation is simple and no different than any mount of this stile. It is a two-hole design, and for the weight it is designed to hold, that is sufficient if mounted to a stud or concrete. All hardware is included, and installation takes about 10 minutes.DO NOT mount direct to drywall. The mounting plate is too small, and hole spacing too short in order to work mounted to drywall without using a piece of plywood to spread the weight. If this is what you intend to do, look for a mount with a 3+ hole design and a larger mounting plate.The swivel point at the wall mount is wobbly. Even after I tightened it down as far as it will go, it still wobbled and left me feeling uneasy.Adjustment is clunky, requires tools, and is poorly placed.It is advertised to handle 14.5 pounds, and up to a "32" screen." Not sure how many sub 14 pound 32" screens are available, but not one of the six 32" screens that I weighed (from home and the office) were light enough. My decade old LG 27" was also too heavy. Assuming you could find one that would work, I would still not trust this mount to any screen worth more than $150.I have a mount that I purchased two years ago for $22 here on Amazon that is leaps and bounds better than this thing.3 stars. It works, but the design and build quality leave much to be desired for a $60 mount.

I have my desk in a corner with my 27" monitor symmetrically positioned at 45 degrees to each wall. I was hoping that the PPQ wall mounted monitor holder would be long enough but sadly the monitor is a few inches too far away from each wall.LATER EDIT: I did fit the unit to the wall and attached the monitor mounting plate using the supplied 1/2" spacer tubes. The monitor (27" ViewSonic) seemed too heavy for the struts and kept flopping on the desk, which is pretty scary. The instructions are accurate but not intuitive and I was turning the power adjusting knob the wrong way to start with. After I figured it out I did in fact defy gravity and the monitor is floating in space as it should. But I was right at the limit of carrying capacity on the adjuster. Before the monitor is mounted, the wall mount seems indestructible but when the weight of the video is applied it seems a bit more whimpy. END OF LATER EDITThe PPQ Video mount is strongly constructed and has been cleverly designed to allow maximum flexibility. It comes with an instruction booklet with lots of diagrams to help with installation and use. The guide is mostly visible rather than written and some of the parts are a bit small but a magnifying glass helps.The mount is completely articulated and has about 9 or 10 inches of vertical travel. The base arm is supposedly permanently mounted to the very chunky and strong wall plate, but you can pry off the rubber cap and undo one screw to free it. Be aware the manufacturer really doesn't want you to do this. But I thought it would be easier to wall mount without the whole arm dangling while trying to drive screws. There was a small explosion of parts flying around, a washer and a plastic bush. I thought I was doomed but I got it back together OK. Just be aware if you do this, to do it as slowly and methodically as you can. Each part of the arm "the humerus?" and the "ulna and radius" each have a cable channel and cable cover help in place with a single screw on the opposite side. So once you have finished you should be able to get complete tidiness and have no wires drooping.The plate that attaches to the monitor is a metal plate that slides onto it's mounting position. This makes it easy to fix it to your monitor first and then slide it on afterwards.So this is a very nice unit but do a bit of planning to check that it will reach in your application.

GREAT ITEM FOR HOME OFFICES. VERY STURDY. AND EASY TO MOUNT ON THE WALL WITHOUT ANY PROBLEMS. PERFECT FOR THOSE WHO MAY HAVE LIMITED SPACES BUT NEED ACCESS TO MULTIPLE MONITORS AT THE TIME. ACTUALLY ALLOWS BETTER ORGANIZING OF SMALL SPACES OR STANDING DESKS. ARRIVED SOONER THAN EXPTECTED AND PACKAGED VERY WELL. NO ISSUES OR DAMAGES DURING SHIPPING. I DO RECOMMEND THIS ITEM!

Great wall mount for echo show 15. Can hold up to 32 inch monitor. Would definitely use caution as amount of weight is limited. Easy to mount on wall and device. Again be cautious of weight of monitor.

got this because i like to bake and cook i had of course gotten a kickstand this of course became an issue when i needed to pause the video. tablet would slide around or tip over, plus tablet in food in isnt great. so got this to get tablet to eye level and out of the way. if i need to step away and need to pause the mount is strong and doesnt move around when i dont want it to.