Complete Electrics Stator Coil CDI Wiring Harness for 4 Stroke ATV KLX 50cc 70cc 110cc 125cc Quad Bike Buggy Go Kart Pit Dirt Bikes

Starting from the front brake switch all wiring was of proper length, I used an Ohm meter to verify wiring prior to connecting and had to swap two wires in a plug to insure proper ground(green wire). ATV started an ran as it should. In my opinion, the wire gauge is too light, and fuse (15 amp) too high amperage too protect the wiring. If I could purchase the harness separately I'd use provided plugs, throw away the 18-20 Gauge wires and use 14 AWG wire. The photos of each device plug came in handy for lack of a wiring diagram. I did use diagram provided by a previous buyer to verify. (Thanks for that).

The item shows a plug on the wires for the stator but there was none on the harness or the stator. I had to cut the plug of the existing stator and hook the wires up. Strangely this kit also uses two different kinds of connectors, spades(That look like they should be mounted in a plug) and a bullet connector for the ground...Only item I used on this atv beside the harness was the kill/start/light switch.This harness DOES NOT include wires for an alarm setup, which I was glad for. If you want the alarm setup make sure you order a kit that has more connectors.Colors did not match on a couple items included with the kit but I can't remember which now. I would think everything would color match out of the package. I went through and unboxed everything and hooked it up on my kitchen table to make sure I was hooking everything up correctly, and labeling each wire so it was easy peasy when I put it on the ATV. A couple things are confusing that could have been made easier with a wiring diagram. There are wires/plugs for lights included with this kit. Front headlight, and rear brake light, as well front and rear brake kill switch wires. Those last ones make it so that you have to press one of the brakes to spark the plug when you press the starter switch. Also there are two extra wires coming off the stator which some ATVs need. Mine didn't and I didn't use the included stator. I bought the kit to have some spare parts either for this ATV down the line or for another one I have yet to tackle issues with. Wiring seems to be mostly universal between these harness kits and all Chinese ATVs with a few exceptions. When in doubt use the parts provided and most match exactly.Still, I took a couple stars off for mild confusion and frustration at not receiving the wiring diagram with the package or from the seller after messaging them. Also for the wiring being just a tad short where it connects to the CDI and battery but these ATVs can have different things mounted in different places.Overall the harness worked just fine. One needs to have a little understanding of wiring or do some research (my case) to figure it out.I'm attaching a wiring diagram another seller has on their item that helped me with my confusion.

I bought this as a set so that I would have components that all worked together. I was disappointed to find that the stator wires did not even match the provided wiring harness connectors. The bright spot was Amazon’s return policy. I was able to walk the box of parts into Kohl’s and get a full refund.