JFG RACING Dirt Bike Handguards,Transfer Imitation Carbon Fiber Universal Handguards Hand Guards for 7/8 in and 1 1/8 in Handlebar for Surron ATV Dirt Pit Bike off Road Motocross Enduro MX

These are sturdy, do not wiggle loose, look great, and are 1/5 of the cost of big brand hand guards. The plastic is as thick as the big brands and the color and overall finish of the plastic is a handsome gloss black. Will def buy another set for my other bike!

Overall am happy with the guards, price was great, they seem solid and well built. They did not fit 2020 KLX230R. The outside end bolts straight up to the bars but the angle of the inside end was about 30 degrees off the alignment of the supplied bracket. Using a hacksaw, drill and tap, and an aluminum bar that I happened to have, I built adapters. I made them work. On the right bike these probably would bolt right on but they are not "universal fit". Update: I checked the other hand guards offered. Mounting for all are very much the same. If these have a fit problem, you will have the same problem with any or all of the rest.

I installed these hand guards on my girlfriends TTR 230 2 years ago And they are still holding up great I just recently got another set for my KLX 300 And I expect nothing but plenty of good years Of bouncing off trees, falls and spills without any broken fingers or clutch and brake levers. Like I said in the title, these are the best bang for your buck if you’re looking for a simple yet effective Hand guard.

The media could not be loaded. Had to leave a review for you guys, they fit. Pretty sturdy, cheap hardware is the only down fall. Easy fix. Just buy it, fraction of the money over big brands. ( to seller secure tour hardware bag, and item. Runs the risk of scratches, and lost hardware. I found all of them in bottom of box. Overall good buy

They look nice and are great color but the metal is crud and the screws strip easy. One side staid in while the other just fell out while riding. The wedge nut just disaperead and my protective gear fell off. Not a great sign. After trying to fix it I decided to just return it but I couldn't get the metal bar out in the handle bar. So I ducked tape the hand guard to the screw and used the bottom part to just hold the hand guard on for my race and it staid in good. Only after flipping the bike on a hill was I able to get the metal piece out of the handlebar. Moral of the story. Buy better quality if you plan on needing the handle guard to do more than block wind.

Buyer beware -The hardware is a joke and doesn’t space the guards far enough from bars so it can’t offer enough clearance for levers . It is the cheapest choice for a reason , pay the extra 20 and get a better version . This is useless and being sent back

Installed these recently on my 2012 DR-Z400S stock 7/8" handlebars. Fit well, work well, adequate protection. It's important to note that the aluminum bar is drilled only at the main mounting points -- no other holes (weak spots) for mounting the plastic parts. Initially, I thought that the plastic part was loose on the rectangular bar stock, but then noticed that one end-bolt was loosening from vibration. I've used loc-tite now, and all is good. I did add flat washers to cover the slotted holes used for the 'universal mount' ends of each bar, and there was an extra set of button-head cap screws that made this simple.The mounting was straightforward and allowed both the brake lever and clutch lever to fully release. In the case of the brake lever, no contact is made with the guards, and in the case of the clutch lever, only slight contact is made, but the lever was fully extended (no measurable clearance at the cable gap).Very satisfied! And saved about ten bucks on my next favorite choice.

Was hard to fit these to my X Pro Titan 250. Hardware supplied was not the best. No instructions, although not needed for myself. With small adjustments and using my owm hardware laying around the garage I was able to fabricate somthing to keep these in place and secured.Look of these is awesome. Metal looks to be durable. And color really pops!

El producto no tiene un buen terminado en el detalle tipo fibra de carbono, le falta calidad en la pintura

Probably the best bang for your buck on Amazon for hand guards. These guards are built well and solid when mounted, they don't budge. In the fit and finish dept I noticed a few areas on the plastics that have stress discoloration and on the aluminum bar the polish is not consistent. But for the price, totally acceptable. I ordered the green and it's not quite a match on my KLR650 C, but close enough. Instructions not included but if you wrench on your own bike, it's strait forward. I had to do a bit of work on my throttle tube to get it to snap back freely, but all good now. I'd buy them again.These are the same design as the Acerbis Rally Pro X-Strong Handguards.

Súper bonitas, los puse en una dm200 y se le veían súper bien.. se ven muy resistentes

No encajan en mi moto los tornillos se pasaron namas apretarlos asi que fatal....

値段の割に安っぽい、直ぐ壊れそう。