VEVORElectric Mini-Tank Water Heater, 2.5-Gallon Tank Hot Water Boiler Storage, 1400W Power, Safety Temperature Pressure Valve Easy Install, for Kichen Bathroom Restaurant, Shelf Wall Floor Mounted

I installed this in a cabinet under the sink in my shuttle bus. Not fun but doable for a novice and no leaks. It heated up quickly and is rated for 20 amps. I used an Echo Flo Delta 2016 wh. solar generator to plug it in. I thought the solar generator plugs were rated at 15 amps. I'm not sure but it worked fine. It is a little larger than I expected. The metal brace didn't look usable, so I used wood blocks to stabilize the base and a clamping strap to secure. It is freezing outside in Tn. and I haven't tried it sense. I think I read one review that stated that there is no drain to remove any residual water from the heater. I pray it is ok. I'll check when the weather is consistently warmer. Meanwhile, I let the sink faucet open and turned off the water supply off till the water stopped at the faucet after installing and checking for leaks and hot water. I also flipped the safety overflow vent open for extra measure.

I bought this to put in my work shop. I have never had hot water in my shop and it's really hard to clean greasy hands in really cold water. It was easy to install and has been working great. I am very pleased with it.

I fix everything at home except plumbing. I was very hesitant to try and install myself. The fittings are 1/2 for the water in and out and 3/4 for the pressure relief valve. Nowhere in the photos does it show the pressure relief valve attached to a drain but the instructions say it must be. Mine is not. Oh well. It is sitting on the floor as I didn't bother mounting it with the 2 screws. It's in a 1/2 bath where the hot water comes from the basement and takes about 2 minutes to get there so this does solve the problem. I had to use reducers to attache braided hoses to the 1/2 fittings as they were already 3/8. I bought a brass valve that split the cold water two ways. That was also 3/8 all around but the one end is 1/2 so that works ok for the tank. It's not a small thing you can tuck away! It's big. The threads on the 1/2 cold inlet were not cut perfectly and I had a hard time threaded the hose. It also wanted to leak. Several attempts and trees and more Teflon tape and it's holding..all of the fittings wanted to leak, even the 3/4 pressure valve. It said hand tightening and then 1/4 with wrench. No ways. It took another two turns with wrench to get them to stop leaking. Anyways. It's done and there is hot water. I don't have a plug in that bathroom so I drilled hole into neighboring room and ran a air-conditioning extension plug. Works fine. It got hot at first and I left it on midway but in morning was only warm. Had to turn into 3/4 and it works fine now. For 88$ it's a good deal. At the local plumbing shop a 2.5 was over 300$.

This is being used at the far end of the house where it takes a while for the hot water to arrive. Works great, almost instant hot water, no more wasting water waiting for the hot to arrive. Really nice on those cold mornings. It is about the size of a basketball and pretty hefty. Simple installation, I put mine under the sink and ran it from the hot water wall tap to the faucet. It solved my problem and the wife is happy.

We installed this water heater in our kitchen because there was a long delay getting hot water at the sink.No more delay! Hot water is now instantly available. The temperature of the water is easily adjustable, making this unit very energy and water efficient. Installation was easy and straight forward, but does require the purchase of inlet adapters, teflon tape and water lines. Overall a great value when compared with other options.

Hot water, no leaks, no brown water....yet. Everyone of this style mini tanks starts off great then begins to rust/rot/corrode from the inside because of the anode rod. Hopefully, this one will be different.

The heater has rust on the plumbing fittings and had free-flowing water in the tank. The seller, Vevor, is giving me a hard time about replacing the heater. The Company asked for pictures of the fittings, which I sent. Now, the Company wants pictures of the UPC so it can investigate the origins of the heater. All I want is a replacement, but it does not look like I will get one any time soon.

I have a small beauty shop in my back yard for 10 years now. I have had a tankless water heater for my hair shampoo bowl the entire 10 years and I've hated it! My water would NEVER get as hot as I needed it to (barely even "warm" most days. Well, it went out so I decided to look into a small tank water heater. I'm kicking myself because I waited so long!! It's awesome and now my water is almost too hot. I have to turn the temperature down pretty low so I won't burn peoples heads. And, I hooked it up ll by myself, it was super easy. If you're thinking about getting it, just do it!

I installed it in my sauna, so we can take hot showers. The size is just enough for two people, unless you want a really long shower. Our space is limited and this unit can be hung on a wall near the ceiling to save space. It heats up surprisingly fast. I like to spend a long time going between the sauna, ice bath and hot tube a few times. This water heater recovers so quickly that I can take several showers. Worked out perfectly for my situation. It looks nice too, which is important as it is in a visible location in a very nice space.

Really like the size and efficiency of this water heater. Highly recommended!

Looks good quality. Once received I realized it was too small so returned. Will get bigger one.

fast shipping, easy to install, happy overall