How to use this paint less dent repair kits from Weylon? 1.Clean the dent with a clean wet cloth; 2. Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes; 3. Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is); 4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue); 5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter); 6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent; 7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen; 8. Clean the repaired place with a clean wet cloth. Pack list: 1pcs Yellow Bridge puller 1pcs Gold puller 24pcs Purple tabs 5pcs White tap down 1pcs 100W Glue Gun, 1pcs Rubber hammer 1pcs Empty Spray Bottle(capacity : 30 ml) 2pcs Yellow Glue Sticks 2pcs Black Glue Sticks 2pcs White Glue Sticks 1pcs Rubber hammer 2 pcs Plastic shovel 1pcs Dishcloth 1 pcs Operation Manual card 1pcs Tool Bag 1 pcs Instruction manual 1pcs Line board
Trustpilot
1 month ago
3 weeks ago
