KUVRD Universal Lens Cap v1 - Silicone Camera Lens Protector, Single | Water-proof, Element-proof, Lifetime coverage; Fits 60 mm - 120 mm, Fits 99% DSLR Lenses

Simple but genius design. Fits almost any lens and stays secure. No more losing caps or dealing with mismatched sizes. Durable and easy to use. Great solution for photographers.

I have only had 2 of these for a coupl weeks, so my review is based only on a brief window of experience. The caps seem to work well - they stay on well and seem to create a good seal. They are flimsier than I expected, but they are doing the job so far. Easy on and off. I am not going to drop a lens on purpose to see how well it protects from a fall, so I cannot speak to that. I feel secure with it so far - time will tell. I gave it a “4” on durability because I don’t know yet how these will hold up. Happy so far.

Versatile little lens cover. Easy to use. Hoping it’ll keep my lens clean and scratch free while bumming around Europe. I don’t care to be bothered with locking caps on and off again.

Great product, just what I needed

I recently got a new Panasonic HC-VX3 camcorder, and installed a UV filter and the lens hood. However this setup does not have a 'lens cap' to protect the UV filter from anything in the camera bag. I saw this KUVRD - Universal Lens Cap, Version 1 and according to my measurements, this would fit over the lens hood. The lens cap arrived, and it was very soft rubber that made it easy to put on and take off my camcorder. I've read others' reviews about the durability of this lens cap, and as it has a lifetime warranty, I'm not overly concerned about it ripping in the future. For me, this was a great purchase to protect my gear. 5 stars for a product that simply works!

This is advertised as a universal lens cap. Yes, almost. The maker of this thing forgot to tell you the dimension of this thing. I measured this cap and found that the diameter and height are 6.5cm and 5.5cm respectively. If your lens diameter is huge with a diameter close to 10cm, then this cap only has about 1cm height when you wrap it onto your lens. If your lens diameter is small enough such as some of those 50mm f/1.8 normal lens, then you could be in big trouble. The first image is a Nikon AF-D 50mm f/1.8, which is smaller than the cap. You do not even have to stretch the cap and the lens simply goes in smoothly (second image). In this case, because the lens can easily go in and out of the cap, what is the supposed "protection"? Moreover, it is not water-proof as shown in one of the maker's video (i.e., the lens with this cap going into water). Rolling the lens with cap on ground as the video shows is a joke because the lens will come out from the cap and dusts go in to the cap easily. Now let us use a larger diameter lens, a Nikon AF-S 24-140mm 1:4G ED VR. The filter size is 77mm and the diameter is larger than 80mm for sure. The 3rd image shows the lens and cap and the 4th one shows the result of wrapping the cap onto the lens. Now look at the 5th image and you will notice that the cap leaves many small gaps between the cap and the lens zoom ring, and, as a result, water and dust can go in easily. In my opinion, that "fit 99% of DSLR Lenses" is a joke. From what I wrote above, for smaller lenses this cap is an open-end pouch and for those larger diameters lenses this cap is incapable of staying in place as the collar would be way too short. I don't know how the seller came up with this 99% number. So, IMO, the best fit lenses may be those with a filter size between 62mm to 77mm. Third, the thickness of this cap is less than 2mm and the material is some sort of soft plastic. I can easily flip the cap inside-outside as shown in the 6th image. Because it is not made from hard material, the protection of the front glass surface is VERY VERY questionable. The 7th image shows that a screw driver is placed on the top of this cap, and just a little force would push the cap in making contact with the front glass surface. What if a strong force hits the front of this cap? I gather the cap could absorb some force due to its soft material, but the front glass will be damaged for sure. Fourth, the material used to make his cap can suck all kind of dusts, fibers, etc. on its surface, and it is rather difficult to remove. This can be seen in all the images included in this review. I took these caps out for just a few minutes and put them on table and/or ground. The inner surface of this cap seems to be a little better but still a dust sucker. A good lens cap should not bring dusts and fibers to the lens. Well, this cap simply does the opposite. In conclusion, the videos shown on the web is not real and should be considered a fake advertisement because (1) the cap could not perform the most fundamental work -- protecting the lens, and (2) the seller failed to reveal the dimension so that if your lens has a not so compatible size you may end up buying this cap as a waste. If you really like this type of lens cap, I would suggest that you visit Lens Cap's site and find a Hoodie that has the right size for your lens. The Lens Coat Hoodie has a hard front to protect the front glass of your precious lens. If you can accept the Hoodies, avoid this cap at all cost. In fact, the Hoodies may be cheaper for certain sizes. DISCLAIMER: I am not an employee of Lens Coat nor working for a competitor of the maker of this cap. I just happen to have many larger diameter lenses each of which is fit with a Lens Coat Hoodie. So, I bought two universal caps to test with some medium size lenses.

I love it! They are so cute and cool looking on my camera; yes I'm spoiling my camera. Also good protection with a silicone cover and stretch as well. Yes waterproof and everything is good. But not magical remember thin at. But still in good condition for your camera. I would buy another one again as soon as possible.

I really love this cap as I can’t find anything else to replace my 24-70 mm lens cap. However, I’m about to order my third set of these. They are very protective and work well, but they do not fit my lens 100%. I tend to have to force it to stretch over the lens rather than how it is described as an easy stretch if that makes sense. When even the tiniest tear gets in this, the rubber is done for and it will eventually tear the whole way up. I haven’t been able to find anything else other options so I would say that it is worth it for the price but it is annoying to replace as it always breaks at the worst possible time.

Poor fit and doesn’t serve EVen regular lens - it is too small and does not withstand shocks or serve as weather /water proof. Waste of money

No me parece tan practico por que para objetivos gran angular, es demasiado ajustado. Creo que tendrian que tener varios tamaños o ese "unico" tamaño que fuese mas grande.

...dass es auf dem Objektiv bleibt. Eigentlich wollte ich es für ein Objektiv verwenden das einen 95mm Frontdurchmesser hat und wofür es herstellerseitig keinen Objektivdeckel gibt. Also länger als zwei Sekunden blieb das Teil nie darauf. Man kann es ganr nicht so sauber zentrieren dass ringsrum genug Material ist dass es nicht wieder wie ein Gummiring runter flutscht. Also bis 82mm denke ich kann man es nutzen, alles drüber macht keinen Spass mehr. Scheinbar hat es auch der Hersteller bemerkt da es ja mittlerweile eine neue Version in zwei größen gibt.

Product works great does exactly as wanted

口径105mmかな？ 入りません。 他はキャノンの50-200のレンズフード越しでも無理が有りますね 口径は74mmかな？ リアにしか普通に入りません 買って損しました。