J-B WeldClear 5 Minute Epoxy, 14ml, Static Mixer, 2 Pack, ClearWeld 14ml, 50114H-2

The epoxy resin was applied with ease, mixing itself as I poured it. It hardened rapidly, resulting in a durable and robust finish. After allowing it to set for 24 hours (my preferred duration), it achieved a solid and impervious state. I utilized a blow torch to eliminate any trapped bubbles, ensuring a visually appealing and secure surface. The purchase was highly satisfactory considering the price, offering exceptional value for money. The resin is transparent in color and exhibits minimal odor.

Used this to repair a broken support on the elaborate glass attachment for a vaporizing device. My only complaints are the single use packaging (if you want to use the fancy built-in mixer straw) and the consistency is very thin so the product tends to run more than I would like. In the future I will dispense a bunch onto a scratch surface and let it begin to thicken up before use.Other than than I like it - has prevented my cracked support from breaking completely and it has remained clear after 3 months of daily use with repeated exposure to both water and 99.9% isopropyl alcohol. Excellent product for repairing glass! I recommend highly.I plan on getting some more and doing another coat to further strengthen my repair. The mixing straw is fun and works well but the single-use factor really kills it - they should package 2 of them for this amount of product!

I couldn’t get this to adhere metal to wood. Metal to metal was awesome. Sadly, the metal to wood didn’t work and I woke up to find the epoxy hardened but didn’t stick.Wouldn’t mind seeing a portable cup and spoon or something sold with this product as after a few stirs with pieces here and there, my forearms hurt.

It did not work for what I was trying to use it for but the quality of the product was great

For medium-duty household jobs this is good, quick-setting epoxy but don't believe the ad copy stating, "The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses!"Well, in truth it dries out, it leaks and forget about multiple uses. After one use, the self-mixing syringe freezes solid--I had to remove it (with difficulty) and use a popsicle stick (purchased separately) to mix it after a single application. Then when I capped both nozzles with the included plastic piece, the cap immediately fell off and glue leaked into my tool bag. The cap is now secured in place with Gorilla Tape.So, good product but horribly-designed applicator. Other reviewers have experienced the identical problems.It's a good basic concept I guess, except it doesn't work at all and for me things got messy...You can only mix it by hand, so discard the "unique syringe" because it only works once. 1/2-oz of epoxy should last awhile for minor chores, but after using 1/32-oz the remainder is useless unless you re-purpose the dispenser...maybe J-B Weld plans it that way so you'll buy more, but I ain't going to replace mine when it's gone. You'd think they'd test these gizmos before spewing out false advertising hype.

I used this to glue some rollers on a sliding shower door. It was super easy to use and has held up for around 6 months now. It is in a rental so I'm sure the door isn't treated with the best of care. No complaints to performance. I've used this product before for the same purpose in other houses and no failures there either(years). The only complaint is that for me it is a one use product. I wish they sold a smaller volume for less cost. I guess the packaging is most of the cost though. I only use a fraction of the product and it goes hard in the tubes once opened. I guess even without the activator the glue does cure over time once exposed to air, even with the cap.

I used this to attach a rear view mirror to the inside of the windshied of my truck. I'm aware there is a special adhesive especially for rear view mirrors but it's expensive and usually just enough for only one application. With this, I was able to attach my rear view mirror and have plenty left over for other things. It is holding very well and the mirror is tight. I prefer two individual tubes of epoxy instead of the syringe. This comes with a mixing tube that attaches to the end of the syringe. You will only use it once. After using it the epoxy inside the tube will harden and you'll never get it out. The expoxy inside the tube is wasted. You will do better to throw away the mixing tube and apply equal parts of epoxy on a piece of cardboard and mix it with a wooden toothpick. The product is excellent. I just don't like the syringe it comes in. With two individual tubes there is much less waste.

The cap can be put back either way. If it is put back differently, the glue in the spout will harden and block it. I won't be buying this brand again.

Excelente producto

عند فتح و استخدام المنتج وجدت أنه منتهي الصلاحية و لا يمكن استخدامة حيث أن المواد المفروض إنها سائلة متجمدة و لا يمكن استخدامها أي أنه منتج تالف

Creates a strong bond. Although the curing time stated on the packaging was not accurate, but this is expected as it's dependant on ambient temperature and humidity. It would also be better if they supplied more than one nozzle.

Logré reparar el brazo quebrado de un dron, el pegamento no se deforma pero tampoco se cristalizó. Muy recomendable. Es de los mejores que he conocido.

Good