3-Piece Under Desk Laptop Mount with Anti-Scratch Felt Board and Durable Shelf for Storage

It is durable however the nail can scratch the surface of the laptop if the laptop is a bit chunky

Misleading Ad. Screw are missing and there is no protective feltro at all. Do not recommend it

No felt board, nothing, just pure metal

These are a simple item that worked exactly as expected. For the price, you can't ask for more. They seem durable, then have foam that helps avoid scratching and any change of the laptop slipping out. You can make them any width, length you want, so assuming the thickness of your laptop isn't over the max, you can make this what you want. A few pro tips: 1. When you get them, the holes are covered with knockouts that are part of the foam. SAVE these knockouts. What you can use them for is to cover the screw head when you screw them in. The screw head is flush mounted and sinks in good so it shouldn't be an issue, but using the knockouts covers them up perfectly and adds a little extra padding, totally worth it. 2. You can turn them around/switch sides etc as you want, because all 3 are the same. Because of this, figure out where you need to plug in accessories/power/usb etc and adjust the placement, there is nothing to say it has to be perfectly square, it just needs to hold your laptop safely. Slightly offset front to rear, left to right or whatever and it will still be perfectly safe but give you better access to your ports. Yes there are knockouts on the side so you can get to your ports, but I didn't have to use them and left the foam in place because I planned in out in advance. 3. Leave yourself a LITTLE extra room left to right so it doesn't get too tight. For example I have a UBI key that I like to leave plugged in to the left side so I can register touch when required for security. I left myself about 1/2 inch total (1/4 on each side) to allow for these things and it really helped. Good luck and I hope this helps!

Not what was described. There’s no felt anywhere. Just plain metal brackets. Screws are not flush with brackets so there is a real risk of scratching.

Lo bueno. Son de metal por lo que se sienten y son resistentes. Lo malo. No traen el fieltro, se daña el equipo que ponga, tengo que conseguirlo por separado aunque no es caro.

I have a Dell Latitude laptop for work that I needed to get off of my desk space. This was relatively easy to install with the velcro tabs provided holding the brackets in place for me to set the screws in. I did need to pop out the foam insert cut-outs in order to open up the screw holes and side holes for accessing my USB ports. It was easy enough. I do advise being extremely careful setting your screws into your desk, though. The screws it comes with are longer than I expected and one of them began to break the surface of the desk. I had to be very cautious when setting those in and would recommend possibly buying a set of 6 shorter screws if you're going to install this on a desk surface that is 1" or thinner.

Lo compré por el forro que menciona y que trae en imagen para proteger de rayaduras la laptop, el que llevan los 3 soportes y NO lo trae.