Glistco Mount Compatible with Oculus Rift Sensor - 3-Pack - Tape Included

I ordered these not really expecting much in the way of quality or sturdiness, but they're perfect. The sensor's mount rod slips into the groove firmly, although there is no audible "snap" it sits securely. The angle of the the slot combined with the articulation range of the sensor itself is just right for my own setup(3 sensor, 10x9ft area) but because the command strips use velcro to snap together you can easily angle the mount itself for a more extreme downward angle if needed. As for the command strips themselves, they stick firmly to the wall. I had to move the position of the entire mount and it unstuck and restuck snuggly to a new location without much effort.Great mounts, would buy again in a heartbeat if I needed another sensor. Very effective and much cheaper than other mounts on the market.

These arrived on time and in great shape. The mounts work great. I use my Oculus in a small office room without much desk/floor space. So having these set up around the room makes it work 10 times better, the tracking works perfectly now, whereas before I could barely play anything reliably. I would have gladly paid double the price for this product. It's simple, sturdy, and it works.

The mounts get the job done very well - No issues installing the sensors within, and they make room for both the cables to cleanly run through and the head to be tilted up and down some. However, the included tape might not play nice with your wall; although it was definitely strong, it lost it's strength within a few days and dropped my sensor straight onto the wooden floor. Be careful with this - I used industrial strength velcro ever since and have had no issues.

Works well, easy to install and holds sensors well. The only thing i was SLIGHTLY disappointed about is that the only reason i bought mounts on Amazon instead of 3D printing them myself is that I wanted something that looked more professionally made. Well, these are 3D printed lol. Its not a big deal and you cant tell once theyre up on the wall, and nothing said they couldnt be 3D printed, so there's no good reason to give them less than 5 stars.

I had been wanting a way to get my sensors up high, because I have very little space to work with in my dorm room. Prior to finding this product, I was planning to use double stick tape to adhere the stock sensor stands to the wall and just go with that. But for the price of these I figured hey I may as well.Turns out that these little brackets are super well designed and printed, with high quality materials and even come with adhesive mounting pads included. Fit my sensors perfectly, and look super stylish. The sensor is the part that has the pivot joint, so the sensor is still able to pivot just fine. I highly recommend this product to anyone looking for a cost effective solution to getting those sensors mounted a little cleaner. 10/10 would buy more if I ever had to. But I won't because there are three included, and that's enough even for those with the full 360 setup. Great product, and great seller!

The mount works as expected. I mean it's a wall mount, it's not exactly a complex piece of equipment. But that being said I like it. Simple installation, gives good movement range for the sensors, and if the adhesive gives just grab a cheap pack of 3M Velcro strips and you're good to go again. I now have a roomscaled VR setup that's out of reach of my toddler, and that makes it that much more worth it personally.

It works well for what it is, but you can simply go to the library and 3d print this exact same piece for maybe 5$but like i said it works very well for what it is.thankfully sensors are no longer needed for vr

these are awesome! I kept having to recalibrate my sensors because I would bump the table and move them or the cat would touch the sensor. Now I can attach the sensors to the walls and know that I'm not going to accidentally bump them again. Super easy to install, good adhesive, and you can still tilt and rotate the sensor's head after installing. I'm happy with my purchase. Thank you!

They're super easy to apply the command strips and place on the wall and the mount gets a pretty good grip on the sensor arm. I have mine placed quite close to the ceiling to avoid anything from blocking the sensors. My advice to anyone buying these is to have somebody help you place them when it comes time to run the sensor setup in the Oculus software. Repeatedly pulling the mounts off the wall then re-applying the mounts (because you're not going to get them set right on the first try!!) will cause the glue on the command strip to peel off. Then you'll need to buy more command strips. Hope this helps!

I would say for the price and use it is a must buy if you are using the Oculus in a small room and need to get it elevated. Its ease-of-implementation is something I appreciate as DIY mounts are nice but at the same time I don't have much room to move around in my room so this takes out so many steps and if you stick it on the wall on the wrong spot, like during the sensor calibration, you can just rip it off and stick it again as the adhesive itself is super solid and can be ripped off and slapped back on the wall a couple times which is handy during the initial set up.

These are lovely little mounts, I thought I might have issues with being able to swivel the sensor left and right but they work really well if you pull them up and out of the mounts about 1cm. My guess is that over time the mount will loosen up but that can also be easily fixed just by adding tape to the inside of the mount to snug it up and So far I've moved these mounts 4 times with the same Velcro strip and I haven't had any issues nor has the mounts loosened up the grip at all.10/10 Great mounts and I would definitely buy them again should I ever need them

They feel a little flimsy, but due to being in an apartment I needed something that wouldn't make holes in the walls.I've had them 7 months and they're still holding up just fine, but I'm not sure how long they'll last.I'm able to adjust my sensors easily during setup and they haven't budged since I installed them, I don't need to reset up my sensors anymore. Overall I'm really happy with them.I'd recommend checking to make sure if you're doing a 3rd sensor to have someone hold it until you're sure it works properly, unsticking/resticking was a little bit of a handful.

I was forced to slam them a 1 star earlier but it has arrived finally and the set up was stupid easy. Lovely 3D printing job. Looking forward to slashing bloqs.