Leak Saver Direct Inject AC Leak Sealer Small System | AC Stop Leak for Most HVAC Systems Up to 1 Ton | Works with All Systems & AC Refrigerants | Made in The USA

I have used this same leak sealer several times over the years. What I have found is that this runs a tight 1st place with the "top of the line" leak sealers on the market. If you know how to properly install this, it is easy to use and the application is simple. It can save professionals a lot of money that can be transferred in lower invoicing for long-term clients, leading to retaining clients at a fair price. It is not a "cure all", meaning it works as designed but will not seal large leaks beyond design so if the leak persists after application then the fault is too large and will need mechanical replacement of lines or parts. As an aside, I have never once experienced clogging of any cap tubes when using this product but have had good success in saving my clients large amounts of money in times of uncertainty. Hence the reason why I prefer this brand. Thumbs up!!! and 5 stars!!!

Did the job perfectly, and was simple to use. Very cost effective for sealing leaks, and saved me about $1200.00 in parts and labor it would have cost me to have a HVAC company to make the repairs, although to use it, you do need some basic knowledge and skills, along with some necessary tools, equipment, and supplies. As far as durability, only time will tell the story on that, but it has been several days now, and my system is still functioning as it should and there have been no issues to this point. Extremely pleased with results so far. Very highly recommended product.

Ok please read my back story. I'm a handy guy, I can fix almost anything. There are only two mechanical things I am not experienced in. 1) Automotive transmissions and...2) Home HVAC. I know the basic principle of home HVAC but never had the tools to work on it or guidance to teach me. Anyway, I have a house on the water, ocean access water in the Ft Lauderdale area. The AC on my home is a 20 year old 4 ton Rheem unit, R22 and exposed to salty humid air. It cools fantastic but over the years there have been a few leaks on the U tubes on the condenser coil (the outside unit, high side) and I had a long time AC guy that has welded the leaks and got me going. This last time a couple weeks ago the AC guy basically told me "my AC is shot I need an entire new system and he can't and won't attempt another repair, the cost of a new system is $8,000". Well I don't have $8,000 so he basically told me "good luck" and left. That's when I started researching these leak stop shots. My long time AC guy said my R22 system was empty and I believed him because the AC was cooling one day, then the next day freezing up then the next day barely blowing cold, the next day the low pressure switch was shutting the compressor down. Ok so I did my research. I bought two of these Leak Saver injections and a 15 pound can of R22....which was incredibly expensive, but cheaper than a new system. So i hooked the can of R22 to the leak savers and shot them in followed by a nice charge of R22. It's been about 2 weeks and the AC has never worked better! Also my AC guy said my system was empty, it's a 4 ton and holds about 11 pounds of R22 and it took 7 pounds to fill so I have plenty of extra 22 and an extra leak saver for the future just in case. People, this Leak Saver WORKS! My 4 ton R22 split system was leaking out at a rate that would have left it empty in a week, it's been 2 weeks and it's blowing cold! Plus I am putting the gauges on every few days to monitor pressure, it is stable! I am amazed this Leak Saver worked. Blown away actually. I gave this stuff about a 5% chance of working on a 4 ton high side leak. Give this a shot before spending thousands. Your biggest expense will be buying R22 but it is available online.

Product works good, follow instructions carefully.

Needed to top off the refrigerant every year. It would last the whole summer. The leak got worse last year. It'd leak completely after a week. Without spending big money to hire a professional, the leak saver allows the top off to last the whole summer. Happy customer 🙂

Easy to add if your adding freon to the system. I use it when I can't find the leak. It has worked for me very well over the years. I prefer it over the injection models or the cans that sometimes don't seem to suck out the product. Takes 5 mins to use and is fairly cheap. Highly recommend.

Update : After posting my review the seller reach out and offered a full refund. They did not ask me to change my review, but I think it’s only fair that I give them credit since they were not obligated to refund any of my purchase price. The only thing they asked was that I give them another chance in the future, which I may do. Product didn’t work in my case, I followed the mfg. instructions but this did not fix the leak in my mini-split A/C system. Not sure if it’s just this specific product or all product like this one in general, but it was a total waste of time and money. Be aware, there are no refunds on consumable products, so you are going to have to accept the risk if you decide to use this product.

I love this product! Instead of an expensive unit replacement for a refrigerant leak, Leak Stop saved the day. Even after a week of scorching 90-degree weather, my AC is still working perfectly. Applying it was a breeze, especially with the convenient CO2 applicator. Highly recommend for saving money and hassle-free maintenance!