K66

PC Specs: 9800 X3D + Thermalright Peerless Assassin 120 MINI, Gigabyte b850i Aorus pro, 48GB DDR5 6000 CL30, 1TB + 2TB NVME's, MSI RTX 5070 2X SHADOW, Corsair SF750, Noctua Fans Pros: SGPC gives you everything you need to build in this case. Not only that, they give you everything pre-organized in a little screw case. They give you a screwdriver and a cute little panda magnet too. Instructions seem good (I didnt read them). Solid build quality. The case itself came packaged nicely and free of damage. Cons: Dust filters came unstuck. They are held on with double sided tape. I actually ended up ripping the bottom one off for better airflow to the video card. Power Plug in a tough spot and the cable is a pain to hide. Tips: 1. I could not fit the Video card in this case without modifying the I/O Shield. I took a bolt cutter and just snipped off the corner of the shield (see picture) Once I did that it fell in place with no issues. I put a little felt pad under the card to raise it slightly so the fans don't get so much turbulence from being so close to the bottom of the case. It worked and it cut the fan noise down. 2. UNDERVOLT UNDERVOLT UNDERVOLT. Not a suggestion a requirement. See my screenshot from cyberpunk 2077 at max settings 1440p after an hour of playing. I am super satisfied with the fan noise and temps. The Thermalright Peerless Assassin Mini 120 combined with noctua fans is a great combo too. 3. Install everything on the motherboard first before you screw it to the case. This is non negotiable. You cant get to anything once its all buttoned up. I will cry on the day I have to replace one of my NVME's. Other Thoughts: This has been my favorite case to build in. Its challenging but once its done it looks great and its so tiny. I think it looks great on my desk. Also Panda Magnet. 5/5 would panda again.

I'm usually not someone who writes reviews, but for this I feel like this warrants it. I ordered this PC case a few months ago but did not get to start the build just until recently. Unfortunately once I opened the case I noticed 1 rivet that wasn't set properly from the manufacturing process. Because a few months had already gone by, I was way past the return window with Amazon. Since I felt like this was a QC issue, I reached out to SGPC Design customer support by email. Sent them a picture of the issue and asked what they could do for me. They responded quick and acknowledged that it was a QC issue on their part, and without even asking, they shipped me a new case to replace my bad one RIGHT AWAY! It arrived in just a few days! After I finished my build, this was probably more my fault for maybe over torquing the mounting screws for the orange handle. The handle broke the first time me lifting it. I think I made my build a bit too heavy for it as well. I reached out to support again .... and again they responded to my email so quick and without asking they sent me a replacement as a "complimentary gift" So appreciative of this. I've got nothing but praises for their support team. A+ Now for the review for the actual product. I love this case. With the right parts it is a neat little case that you can throw into a backpack and take with you on travel. Assembly is pretty solid. Cable management is a bit lacking but I knew that ahead of time and lets be honest, the smaller the case is the more thats a given.

This case is amazing. First of all, I just want to say thank you to the manufacturer for including a small organizer for all the screws. A screwdriver a nifty little magnet and all the accessories that you could possibly need for your build As far as the build goes, this case is very easy to build in for a small form factor. Plenty of room to maneuver around the aesthetics of the case are nice. I'm running a ryzen 5 7600 x3d and the thermal test on this case keeps it around 75° c with a thermal right 135 mm CPU fan. I also put three 92 mm fans at the bottom of the case and with my RX 7600 this machine can game very well and is very portable. I am very satisfied with the structure of the case with the cooling and all the accessories that come along with it. Definitely an a+. I will definitely buy from this manufacturer again

Just before Christmas I built a SFF PC to travel with in much smaller SGPC case. It served it's purpose, but it didn't have the greatest temps due to the limitations for cooling. I saw this and decided to move everything over and since it was more open with a clear panel, I could attempt to make a look nice. This case is still very small and portable. It uses a larger SFX power supply compared to my FLEX, but I believe can also go to a even larger ATX one. It came with the same familiar orange handle that I loved from my old case too. The build was mildly challenging. I initially ordered standard 92mm x 25 mm fans only to realize they wouldn't fit in the top due to memory and cooler, so I swapped for 92mm x 15mm ones that fit nicely. I also really don't care for the power cable running through the middle and was barely able to get it routed through the top, behind the fans, and down the side. I may look for a replacement for this cable with 90 degree connectors on both sides. Otherwise cable management wasn't too bad, I knew going in with this many fans, I was going to have a lot of wires to hide. Temps and airflow seem better to me than when I was using just a low profile cooler. Idle is about 5 - 6° C less and during benchmarks temps were stable at around 60° C for both GPU and CPU (see photo). Overall this is a pretty nice ITX option, that is still small, portable, not too expensive, and shows off your hardware. Something I don't see for a lot of ITX cases.

This case is really nice for its price and comes with everything you need along with easy to understand instructions. The white steel paint quality is really good and comes with extra screws for everything, even comes with white thumbscrew and silver thumbscrew options for the glass panel. The included 92mm fan is ARGB and also comes with a full sized phillips screwdriver. Everything is packaged well and was delivered fast without any issues. Was kind of hard to find many reviews of this case, but coming from using a SSUPD Meshlicious, Lian Li Dan A4-H2O and Louqe Ghost S1 MKIII, this was a pleasant surprise and a nice setup that keeps a reference layout with plenty of air cooling options. 10/10 would recommend this case to anyone looking for a similar setup!

SGPC has been making lots of improvements since the last case I bought but there's still lots of flaws. Notable improvements are the actual glass side panel now, as well as the ARGB fan, and the hardware organizer. The big flaws are - Threaded holes are drilled poorly and cause some screws to insert crooked. -The case only comes with two plastic thumb screws, and the metal ones don't have rubber grommets to prevent direct contact with glass. This risks damaging the glass. -C13 extension is too short and runs diagonally through the middle of the case, which does not allow for the full air cooler clearance that the case would otherwise offer. I don't know if my unit was mistakenly shipped with the cable from the K66 instead, but it is at this point my biggest issue using the case.

Very tight fit

Took a bit of testing but got everything in there nice and clean with good thermals. Really love this case and size. I wish I could be sponsored to build computers just so I could build another.haha

For a case of this price point the metal is very flimsy and the design is very flawed,the two biggest flaws being, one the psu mounting is beyond terrible I had to resort to double sided tape, and two, instead of the psu plug being in the standard spot for cases of this size, it is instead put in an awkward position near the gpu.

Gutes und vor allem kleines Case. Bei mir ists n ryzen 9, rtx 5060 single geworden, mit etwas Geduldt bekommt man alles sehr gut unter, habe sogar einen lüfter und eine ssd mehr unter gekommen.

なんとなくひとめぼれで購入してしまいました。 フルハイトグラボが使えるケースでしたら、 最小クラスに入るのではないでしょうか？？ （当方はゲームとは現在全く縁が有りませんが。。。） ちっちゃくて見栄えも良くていい感じで購入して良かったです。 ただし以下の点には注意が必要です。 ・オレンジの取っ手を付ける場合には仕様が変わったのか トップのネット部分に自分で2つ穴をあけないと付きません。ネジ等の部品はついて来ます。 ・LEDランプ等が一切ないデザインです。 意図されて付けられてないのかどうかわかりませんが、 ランプ類が有りません。。。光るファンとかでない場合、 電源のON、OFFが判りづらいです。。。 そこで私はアマゾンさんで売っていたLED付のスイッチ(12mm)に交換してみました。 基板をカットしないと付かないため全くおススメできませんが、、、 ご参考になれば幸いです。（写真ご参照） ・CPUファンが大きい場合、背面の9cmファンはスペースの関係から、 薄型のモノでないと付かないかもしれませんです。（写真の通りです） いろいろ書いてしまいましたがちょっと手を入れれば、 パソコンはこれ一台で事足りそうなケースじゃないかなあと感じました。 今後の耐久性に期待しております。 ちなみに現在の構成です。 CPU：AMD Ryzen 5 5600GT クーラー：ID-COOLING IS-55 MB：Gigabyte A520I AC メモリ：Crucial DDR4 8GBｘ2 SSD：Crucial P310 1TB 電源：ウチにあった300WのSFX電源

This case demonstrates how a bad design ruin the user experience. It won’t allow you to take off the front and top panel, making the cable management process a nightmare…

電源ケーブルが断線していた。 新しく自作するために購入した(新しく電源ユニットも同時に購入)が通電されず、電源ユニットの不良を疑って手持ちの電源ユニットを使用しても改善無し。 電源ユニットに直に接続すると起動できたので、断線は間違いない。 とサポートに連絡すると、補修部品を発送してくれるとの事で、高評価。本体寸法もGood。