Drywall Stilts Aluminum Tool Stilt Height Adjustable Lifts Taping Paint Stilt for Sheetrock Painting Finishing Pruning Branches or Cleaning (Blue, 18"-30")

A really good set of stilts for dry walling or anything else that involves reaching an extra two and a half feet.I got them mostly for cleaning our conservatory roof which gets very dirty over the year.The stilts were easy to assemble. Fairly easy to put on and terrifying to use. I'm sure that will get easier with practise. They will be fine and I'm confident the quality of them is second to none.They work well, with some kind of suspension built into them, to help them absorb knocks. Nice for those who know how to use them. I have seen these in use and so will master them in time. Until then, I will continue to get my wife to hold my hand while I reach the roof tops.

The actual construction of these Stilts is superb, with a built in heel and straps just below the knee you will feel secure once you have acclimatised yourself and I suggest you practice on grass for a softer landing just in case !!Made from aluminium in a pleasant shade of Blue with built in springs and tensioner,Most importantly the floor grips or “soles” are non slip.In practice you will save hours of time by not having to constantly move steps and platforms, Just eye up your working area for obstruction as it’s important because once you are strapped up you have to stay upright.As well made as any I have seen and the engineering is solid and reliable. 5 Star rating.

In fairness I have given these an absolute beasting over the last 5 weeks and they have been used daily. They turned up in time for me to do a renovation which involved removing lathe and plaster from 2 entire high ceilings and replacing them with plasterboard, then plastering every single wall and ceiling. I would have normally used some box scaffold and platforms as I have a fear of using stilts. They are still dangerous, but after a few wobbly attempts and someone on standby to stop me falling, I quickly gained confidence and I have never looked back. You really do need to be careful with these and keep the work area clear. If you fall, there is no break away, you are strapped in and going down hard.These have saved my knees a heck of a lot of climbing up and down ladders and also saved me time not having to keep shifting platforms around. They were a massive help for the high ceilings, not just for the plastering but also for cutting in where wall meets ceiling. If plastering, you will really need some help in trowelling you servings of plaster - unless you can put the mix on an elevated stand.They are easy enough to adjust to your desired height, leg and shoe size and there is also a little side adjustment to take into account any bandy legs. The quick straps hold them secure to your legs and the springs allow flex and return for walking. The grip is good on most flooring, but it is a hard plastic block, so you will need to take extreme care on smooth tiled floors, especially when plastering where water is going to be splashed around. These have been a great help for me and after 5 weeks of solid use they look like they have been through the wars but are still working solidly.I can’t find any reason to give less than 5 stars.

These are very well designed and constructed with the built in heel and straps just below the knee it makes you feel very secure. These are made from aluminium we've built in springs and tensioners. They are also non slip. These are easy to adjust to your desired height, leg and shoe size and there is a little handy adjustment to the side too. The straps hold them secured your legs and the springs allow flex and return for walking. They make decorating so much easier than climbing up and down ladders. They are very lightweight And portable and easy to store full stop they have a maximum holding weight of 225 pounds.

Excellent build quality. Aluminium-alloy gives the stilts a perfect combination of lightness and structural strength. They're precisely engineered, quick to put together, and surprisingly stable on the ground (ideally a flat hard indoor floor surface rather than uneven outdoor ground). There's a little adaptation necessary if you haven't worn decorating stilts before - acclimatisation, really: getting used to balancing (which is easy on hard flat surfaces) and also learning how to move whilst wearing the stilts. Once you're used to them, they make certain decorating jobs (painting high ceilings is the key one) much easier than those same jobs would be with step ladders or raised platforms. With the stilts on, you're able to move around naturally and there's no need to move your kit; it goes where you go. Just please make sure you're securely strapped in. The principle is the same as wearing ski boots: if the bindings are loose, the wearer has poor control over his/her movement and is more likely to fall. With the straps secured tightly, the stilts become an extension of the wearer and can be (thanks to their relative lightness) walked on with hardly any effort at all.I've no criticisms of these stilts. They're beautifully engineered, they're strong and light, they're safe (as long as straps are tight and the wearer has at least a reasonable sense of balance), and they make some of the most tedious, time-consuming jobs considerably quicker and easier. Perfect.