Magigoo All-in-One 3D Printer Bed Adhesive Glue to Reduce Warping, 120mL

This stuff is an absolute GAME CHANGER! I have an Ender 3, and it has been an uphill battle for the last year getting prints to stick evenly to the buildplate. I had pretty much given up on 3D printing until I got this stuff - now not only do my prints stick perfectly to the plate with no bowing, there's no more "spaghetti", the underside of the prints are smooth as silk, there are no more hills and valleys you get using glue stick, and you don't need to wash and refresh constantly. This is so easy to use, just make sure you shake it up and press that sponge into the plate (a gentle squeeze is fine, but don't overdo it); spread it evenly in two directions and you are good to go. With minor touch-ups on the plate, this stuff will last forever! I actually look forward to printing now!! If you have buildplate adhesion issues (and who doesn't?) and don't want to turn tinkering with your printer into the hobby, or throw it out the window, you MUST invest in this stuff. Sure it's more expensive than gluestick, but man is it worth it.

Magigoo is my go-to goo for 3D printing. I have multiple recipes they offer, but use this version the most! It's easy to apply, can have a few prints before needing to be reapplied, and doesn't interfere with the prints too much. If you are looking for better adhesion, or need a layer to avoid too much adhesion, this is the goo for you!

MAGIGOO HAS A CUSTOMER FOR LIFE!!!!! I was really struggling with first layer adhesion using glue stick for PETG. I was constantly tweaking settings, using different build plates, and consumed tons of glue stick. I bought Magigoo as a last ditch effort and I was blown away after the very first layer. It is amazing how Magigoo holds super strong when it is hot and the parts pop right off when the plate cools. Most times I do not even need to flex the build plate to get the parts to come off. A single layer of Magigoo seems to last forever because I had 12 successful prints on the exact same area before having to reapply a very thin layer. Also, clean up is also a breeze. No more really hot water and scrubbing to clean the build plate. A damp paper towel with water works great. SERIOUSLY, THIS IS BEST PRODUCT EVER FOR 3D PRINTING!

Bought a small bottle of this awhile back when I first got into 3d printing on a recommendation. The bed that came with my ender 3 v2 (the glass one with the one side perforated coating) well that absolutely tore up the applicator tip and I ended up shelving that plate and the bottle of Magigoo for PEI flex plate. Fast forward a few years and started printing ABS for some projects so pulled the bottle out. Could barely get it to flow with the messed up applicator, and my textured PEI tore it up even more. Ended up using some microfiber towels to apply it and definitely makes ABS a lot easier even on an open bed machine. On a whim contacted Magigoo and within a few emails they're mailing me replacement applicators at no cost. THATS the customer service I look for and love to see, zero questions, no asking me for pictures. Ordered a 4oz bottle within a few days after that just because it's a quality product with quality customer service. A little goes a long way so doubt i'll need a new bottle for awhile but when I do I'm sticking with this over other bed adhesives.

Excellent product to help hold troublesome prints down. I don’t know the chemistry behind it but it seems to activate with heat and release when it cools. I print mostly PETG and PLA very happy.

Pro: Strong substance, great at holding my prints, nicely packed, no bad smells. Cons: Expensive for the amount give

I have been doing some printing of large objects in ABS and having adhesion issues. I decided to try Magigoo to see if there was a difference. It really helped stick down some filaments that have given my issues and it is really easy to apply. It's a new permanent addition to my print farm for those times when I the filament needs a little extra adhesion. It does not take much to coat the plate even on a Voron V2.4 350. I like it much better than the solid glue stick with much less fight to get an even coating.

Game changer. I was printing very flat ASA pieces about 3/4 the size of the built plate. Every attempt to prevent the edges from lifting off the plate during printing, failed. I stumbled across this in a YouTube video on printing ASA and I’ve had no further lifting issues. 100% excellent buy.

Does exactly 2hat it is needed for

Makkelijk in gebruik en geen warping meer van geprinte objecten. Object komt zeer gemakkelijk los zodra het bed is afgekoeld.

Ich habe den Magigoo MO2018 Stift gekauft, weil ich beim 3D-Drucken ständig Probleme mit Warping hatte – besonders bei größeren PLA-Teilen. Nach einigen Fehldrucken wollte ich endlich eine Lösung, die einfach funktioniert, ohne ständig am Druckbett herumzuschrauben. Schon beim ersten Einsatz war ich begeistert: Der Kleber lässt sich super gleichmäßig auftragen, trocknet schnell und hält die Drucke bombenfest während des Drucks. Selbst bei langen Druckzeiten bleibt alles an Ort und Stelle. Das Beste: Nach dem Abkühlen lassen sich die Teile fast wie von selbst lösen, ohne das Druckbett zu beschädigen. Außerdem ist der Kleber ergiebig – eine dünne Schicht reicht für mehrere Drucke. Ein kleiner Verbesserungsvorschlag: Eine leicht transparente Kappe wäre praktisch, um sofort zu sehen, wie viel noch im Stift ist. Seitdem ich Magigoo nutze, habe ich keine Haftungsprobleme mehr, was mir viel Zeit, Nerven und Material spart. Fazit: Perfekt für 3D-Drucker-Besitzer, die zuverlässige Haftung ohne Klebeband oder Haarspray wollen – klare Kaufempfehlung!

Endlich keine Probleme mehr mit Haftung bei ASA. Zugleich lassen sich Rester deutlich einfacher von der Platte lösen

First bottle of this was great, so i got a larger version this time but it is awful, it sticks the print to the bed so hard i have to chisel it off. Not impressed, will not be buying it again